HALCYON DRACV48 Constant Voltage LED Driver Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
DRACV48 Constant Voltage LED Driver
Instruction Manual
Constant Voltage LED Driver
INSTALLATION INSTRUCTIONS
DRACV48 100W/ DRACV48 320W
Product Features:
– Independent design
– Analogue flicker-free
– Universal AC input
– Built-in active PFC function
– Primary and secondary sides come with leads
– Protections: opencircuit, shortcircuit, overload, overtemperature
– Differential mode 4kV and common mode 6kV surge immunity for DRACV48 320W
– Differential mode 4kV and common mode 4kV surge immunity for DRACV48 100W
– SELV equivalent
– Protection class I
– IP67 design
Technical Data
Model No.| Input voltage (V)| Max. output (W)| Output voltage (V)| Output
current (A)| Power factor (λ)| Efficiency full load ( %)| No-load power (W)|
Ambient temperature to °C| Max. casing emperature to(°C)| Isolation|
Dimensions LxVVxH (mm)| Weight (9)
---|---|---|---|---|---|---|---|---|---|---|---|---
DRACV48 100W| 100-240| 100| 48| 0-2.08| 0.95| 88| <0.5| -20…+50| 80| SELV|
199x67x35| 800
DRACV48 320W| 100-240| 320| 48| 0-6.67| 0.95| 93| <0.5| -40…+50| 90| SELV|
252x90x44| 1600
Wiring Details
Standards
EN 61347-1
EN 61347-2-13
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61547
Important Notes
– This Control Gear is suitable for operation with Constant Voltage LED
Modules.
– Ensure min/max wattage of LED Driver is adhered to, in relation to LED
Module used.
– Secondary Terminals are polarity conscious eg: positive or negative.
– Do not install LED Module to live Driver.
– Do not switch Secondary feed.
– Driver non dimmable (See dimmable range)
– Drivers must be installed above Insulation.
– Drivers must be installed by a qualified electrician.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>