soundcore Q45 Wireless Headphone User Guide
- June 3, 2024
- Soundcore
Table of Contents
soundcore Q45 Wireless Headphone
INSTRUCTIONS
WEARING
Wear the headphones with the “L” logo on your left ear and “R” logo on your right ear. Adjust the length of the headband for a comfortable fit.
CHARGING
Fully dry off the USB port before charging.
POWERING ON & PAIRING
Press and hold the power button for 2 seconds to turn on. The headphones will
automatically enter Bluetooth pairing mode when connecting for the first
time.
Select “Soundcore Space Q45” on your device’s Bluetooth list to connect.
MULTIPOINT CONNECTION
The headphones can connect with two devices at the same time. When already connected to one device, press the power button twice to pair with another device.
MANUAL PAIRING
To manually enter Bluetooth pairing mode when the headphones are off, press and hold the power button for 5 seconds until the LED flashes blue.
BUTTON CONTROLS
×1 : Press once
×2: Press twice
2s: Press and hold for 2 seconds
NOISE CANCELLATION
To reduce ambient noise, switch to noise cancellation (default) via NC button and customize in the Soundcore app.
- Adaptive Noise Cancelling: Adjust the level of noise cancellation automatically for various scenarios.
- Custom Noise Cancelling: Set the level of noise cancellation manually.
TRANSPARENCY
To stay aware of your surroundings while listening to music, switch to transparency via NC button and customize in the Soundcore app.
- Talk Mode: Voices stand out more clearly from other ambient sounds.
- Custom Transparency Mode: Set the level of transparency manually.
LDAC
Enable LDAC in the Soundcore app for superior quality sound.
Note : Only available on devices powered by Android 8.0 or later.
WIRED LISTENING 
Play audio on an external device by plugging in a 3.5mm AUX cable. Wired listening will turn off Bluetooth mode automatically.
RESET
Press the power button and volume up button simultaneously for 5 seconds until the LED flashes red three times.
APP
Download the Soundcore app to customize ambient sound, adjust EQ settings, update firmware, and explore more.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license.Other trademarks and trade names are those of their respective owners.
LDAC and LDAC logo are trademarks of Sony Corporation.
Based on the SGS Lab testing result, the deepest band of noise reduction is up
to 38dB, and the comprehensive noise reduction is up to 23dB. Key word of
“Reduces Noise By Up to 98%*” represents the noise reduction performance of
the deepest frequency band.
[email protected]
[email protected] (For Middle East
and Africa Only)
[email protected]
+1 (800) 988 7973 (US/CA) Mon-Fri 6:15AM – 5:00PM (PT)
+44 (0) 1604 936200 (UK) Mon-Sat 6:00 – 19:00 Sun 6:00 – 14:00
+49(0)69 9579 7960 (DE) Mo-Fr 8:00 – 16:00
Input : 5V 0.7A
Playtime (varies by volume level and content):
Up to 50 hours (ANC on); Up to 65 hours (ANC off)
Anker Innovations Limited. Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK
matters)
Anker Technology (UK) Limited
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany