FIRE CAM BJ800 1080 Camera with Flashlight Kit User Manual
- June 5, 2024
- FIRE CAM
Table of Contents
FIRE CAM BJ800 1080 Camera with Flashlight Kit
Features
- CREE XPL LED
- Brightness output up to 1000 lumen
- Integrated “Precision Digital Optics Technology” provides extreme reflector performance
- 18650 2600mAh Lithium Battery with protection circuit
- External USB Charging Cradle for 18650 battery
- Precision machined aluminum alloy with hard anodized in black finishing
- Reverse Polarity protection prevents damage from incorrectly inserted batteries
- Can use 2*CR123 Lithium dry cell battery
- IPX7 Rated
- High/Mid/Low/SOS/Off Mode
- 1.5M Drop Resistance
Dimensions
Length: 138mm
Bezel Diameter: 32mm
Body Diameter: 25.4mm
Accessories
- External Charging Cradle
- 1 m USB Cable
- Holster
- User Manual
Battery Options
18650 Lithium rechargeable battery / 2*CR123A Lithium Dry Cell Battery
Output & Run Time
18650: High 2.5 hours/Mid 3.5 hours/Low 8 hours
Operating Instructions:
Battery Installation
Unscrew end cap and remove cardboard terminal protector and discard.
To Switch On: Press the button at the end cap to power on to High beam, press
twice for Mid power, press twice again for Low power, twice again for SOS,
twice again for Strobe and once for Off mode.
Warning:
- Ensure the batteries are inserted with the positive ends pointing to the head. The BJ800 will not be operational with incorrectly inserted batteries. Fully charge before first use.
- When the BJ800 is kept in a backpack or left unused for extended periods of time, we recommend all batteries are removed to prevent accidental activation of the flashlight or battery leakage.
Charging Function
The BJ800 flashlight is capable of charging one 18650 Lithium battery with the
included USB charging cable. Unscrew the Charging cover at the neck of the
flashlight until the charging port appears. Connect the charging cable to the
BJ800 charging port and a power source (USB chargers, PC or other power
terminals). Press power button for red indicator light to come on next to the
charging port. Under normal charging conditions, the red indicator light will
illuminate steadily to notify users. When charging is complete, the BJ800 will
terminate the charging process automatically and green power indicator goes
on. Make sure to retighten the Charging cover for waterproof seal.
External Charging Cradle
The external charging cradle is capable of charging one 18650 Lithium battery.
Insert the battery onto the charging port in right direction. Put the positive
side of battery onto the right end of the cradle. Red indicator light will be
illuminated steadily to notify users. The green indicator light will be on
when it fully charged. Fully charging one depleted 18650 battery takes approx.
4 hours.
Charging/Charging Battery
Batteries should be recharged or replaced when any of the following occurs.
The output appears to be dim or the flashlight becomes unresponsive. High beam
will not stay on when battery is low on charge. Other modes will still operate
until battery is discharged.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin
coating of silicone-based lubricant.
Thank you for purchasing the BlackJack BJ800
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>