RUGGED RADIOS AUDIO-ISO-KIT Control Hub Installation Guide
- September 20, 2024
- rugged radios
Table of Contents
RUGGED RADIOS AUDIO-ISO-KIT Control Hub
Specifications:
- Product Name: Audio Isolator
- Model Number: AUDIO-ISO-KIT
- Version: v1.0 | 05/24
Product Usage Instructions:
Installation:
- Connect Audio-Iso to Intercom:
- Connect one end of the CS-6P-EXT-6 cable to the Intercom’s AUX port.
- Attach the other end of the CS-6P-EXT-6 cable to the AUDIO-ISO box.
- Mount AUDIO-ISO in a suitable location away from water and outdoor elements.
Device Connections Overview:
The front of the AUDIO-ISO box has three hardwire ports: AUX-IN, CELL, and
AUX-OUT.
- AUX-IN: 3-pin port for navigation or music devices
- CELL: 4-pin port for cell/sat phones
- AUX-OUT: 3-pin port for GoPro & audio recording devices
Connecting Devices:
Music/Navigation Device:
Use the CS-MUSIC-3CON cable to connect your music or navigation device to
the AUX-IN port on the AUDIO-ISO box.
Cell/Sat Phone:
For WiFi calling, use apps like Zello. Connect your cell/sat phone to the CELL
port on the AUDIO-ISO box.
GoPro & Audio Recording Devices:
Connect your GoPro or audio recording device using the CS-MUSIC-3CON cable
to the AUX-OUT port on the AUDIO-ISO box.
Volume Control :
The incoming audio volume is controlled on your connected device.
FAQ
Q: What should I do if my device does not have a 3.5mm output jack?
A: You may need an adaptor. USB-C to 3.5mm adaptors are commonly available
online and at electronics retailers.
Q: Can I charge my device while using the Audio Isolator?
A: It is recommended to use the P.N.# CAAP-SP adaptor or a similar audio
splitter for simultaneous audio cable connection and charging.
Part List:
AUDIO-ISO-KIT includes the following components:
- AUDIO-ISO x1
- Optional accessories:
- Rugged PN# CAAP-SP power splitter
- USB-C to 3.5mm jack adaptor (Refer to device manufacturer)
- CS-MUSIC-3CON x2
- CS-MUSIC x1
- CS-6P-EXT-6 x1
Connect Audio-Iso to Intercom
- From the back of the Intercom, connect one female end of the CS-6P-EXT-6 cable to the White “AUX” male port on the 6100 Intercom or AUX on 357, 600, 660, 686, 696 GEN1 intercoms. If your intercom is not listed above, please contact the Tech Team for further help. Call our Tech Team at 805-541-1696.
- Attach the other female end of the CS-6P-EXT-6 cable to the male port on the back of the AUDIO-ISO box.
- Mount AUDIO-ISO in a good location free from exposure to water and outside elements.
Overview
The front of the AUDIO-ISO box has three hardwire ports: “AUX-IN”, “CELL”, and “AUX-OUT” (from left to right). The “CELL” is the only 4-pin port on the AUDIO-ISO box and therefore only compatible with CS-MUSIC cable. “AUX-IN” and “AUX-OUT” are both 33-pinports and are only compatible with CS-MUSIC-3CON cable.
- AUX-IN 3Pin Navigation/Music
- CELL 4Pin Cell/Sat Phone
- AUX-OUT 3Pin GoPro & Audio Record Devices
Additional items may be needed:
PN#: CAAP-SP, USB-C to 3.5mm adaptor
NOTE: USB-C to 3.5mm adaptors are widely available online and at electronics retailers. NOTE: Charging your device while using? If so it is recommended that you use the P.N.# CAAP-SP adaptor or similar audio splitter. This will allow audio cable connection and charging at the same time.
Music/Nav.
When connecting to a music or navigation device, the CS-MUSIC-3CON cable is needed. Simply plug one side (3.5mm plug) into the AUX-IN port on the front of the AUDIO-ISO box. Connect the other end (3.5mm plug) to your music or navigation device. Check your device for audio output ports and their accessory options. If your device does not have a 3.5mm output jack an adaptor may be needed. See note in overview.
Volume Control: The volume of the incoming audio is controlled on your device. Simply adjust the volume on your device to the desired level.
Cell/Sat Phone
Next, when connecting a cell or sat phone you must use the CS-MUSIC cable.
This cable has 4 pins that are required on most cell or sat phones. Connect
one side of the cable (3.5mm 4C plug) to the CELL port on the front of the
AUDIO-ISO box. Connect the other side (3.5mm 4C plug) into your device. If
your device does not have a 3.5mm accessory jack, check for available
accessories from the manufacturer or aftermarket companies. In most cases ,a
Lightening or USB-C adaptor can be used. See note in overview.
WiFi calling: There are available apps that allow WiFi calling and push-
to-talk communications. An example is the app Zello. Visit zello.com for more
information.
GoPro & Audio Record Devices
Record the entire conversation! Simply connect a Go-Pro or Audio recording device using the CS-MUSIC-3CON cable. Connect one side of the cable (3.5mm 3C plug) to the AUX-OUT port on the front of the AUDIO-ISO. Connect the other side (3.5mm 3C plug) into your device. If your device does not have a 3.5mm accessory jack, check for available accessories from the manufacturer or aftermarket companies. In most cases, a USB-C adaptor can be used. See note in the overview section.
Performance Check
Now it’s time to test. It’s always best to check performance in an outdoor, open area. Turn on the radio and intercom system. Check system operation and set VOLUME and VOX levels. Some intercoms are live mic so VOX level adjustment is not applicable. Turn on each device one at a time. Check operation separately to ensure each device is functioning properly. Once all devices are on and functioning properly, re-check with the engine running. At idle and revved up. If any electrical noises are heard, check for proper connections. If noises persist, or if you have any other questions, our team is ready to help. Call our Tech Team at 888-541-7223.
Call Our Tech Team: • 888-541-7223
References
- Rugged Radios • UTV & Off Road Communication Equipment and Accessories
- Zello | The Most Reliable Push-to-Talk Walkie-Talkie App
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>