ORNAMENTAL Traditional 18-in x 1.916-ft Pine Primed Wall Panel Moulding Instruction Manual
- June 9, 2024
- ORNAMENTAL
Table of Contents
ORNAMENTAL Traditional 18-in x 1.916-ft Pine Primed Wall Panel Moulding
Instruction Manual
TOOLS NEEDED
- Construction adhesive
- Fine sand paper
- Saw
- Caulk and Spackle
- Painters tape
- Chalk Line
- Measuring tape
- Level
- 100% Acrylic latex paint
INSTALLATION PREPARATION
- Acclimate materials in room for 24 hrs prior to installation.
- Read instructions before beginning.
- It is advisable to paint mouldings and corner aids with 100% acrylic paint rior to installation.
- You may find it helpful to tape the items in place temporarily to determine your favorite arrangement. Mark the outline.
- Remove and proceed to install using the outlines for reference.
- Caulking may be indicated if the installation surface is uneven.
Installation Steps
- Assure that installation surface is smooth, clean and dry.
- Measure and mark location on the installation surface.
- Trim accent mouldings to length.
- Apply small bead of adhesive to back of elements and place pieces to the wall aligning with your mark. Remove any excess adhesive. Secure in place with painter’s tape until cure. Note: Small finishing nails may be used in lieu of tape.
- Fill open joints with spackle. Blend joints with sand paper as needed. Touch up with 100% acrylic paint.
Note: This image is for general reference. Actual parts vary by style.
FOR MORE INFORMATION VISIT ORNAMENTAL.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>