3STAR HONT10-SKD-3SI Honda talon Skid Plate Installation Guide
- June 1, 2024
- 3STAR
Table of Contents
3STAR HONT10-SKD-3SI Honda talon **Skid Plate Installation Guide
**
Hardware Kit
| Hardware | Description | Qty |
|---|---|---|
| 20MM BOLT | 22 |
| 30MM BOLT| 6
| SPACER| 6
| PUSH NUT| 6
| CUP WASHER| 28
Rear Panel
Front Panel
REMOVE EXISTING SKID PLATE
ATTACH BOLTS WITH SPACERS
Assemble 30mm bolts with cup washer, insert through the outside of the skid plate, on the inside, attach spacer with push nut. Do this for all the circled holes in the photo.
Outside view
START WITH THE REAR PLATE
Hold rear plate to the under carriage. Start a bolt in each corner, this will
hold the skid plate in place while starting all other bolts.
INSTALL ALL OTHER BOLTS
Hand tighten for now.
INSTALL FRONT SKID PLATE
Install all remaining 20mm bolts in the same way as you installed the bolts on
the rear skid plate. You will use
all 20mm bolts for the front skid plate.
Again do not tighten this will be the last step.
TIGHTEN ALL BOLTS
Documents / Resources
|
3STAR HONT10-SKD-3SI Honda talon Skid
Plate
[pdf] Installation Guide
HONT10-SKD-3SI Honda talon Skid Plate, HONT10-SKD-3SI, Honda talon Skid Plate,
talon Skid Plate, Skid Plate
---|---