muse M-695 DBT Micro Audio System with DAB or FM Radio User Manual

1. Repeatedly press SOURCE button to select FM or DAB mode.

2. In FM mode, tune to a desired radio station with  button.
   In DAB mode, tune to a desired radio station with button in the station list, press SELECT button on unit or press button on remote control to confirm.

3. Press PRESET/SCAN on unit or SCAN/ PROG. on remote control to enter into preset store mode.

4. Rotate SELECT knob on unit or press button on remote control to select a preset channel, then press and hold PRESET on unit or SCAN/ PROG. on remote control to confirm.
   Note: If you choose a station that hasn’t been allocated, “Empty” will be displayed. If the station has been allocated before, the FM frequency or DAB station name will be displayed.

5. Repeat step 2-4 to store other stations.

Quick Preset
You can use the number buttons to access quick preset. Select a radio station, then press and hold the number button to store the station in preset channel respectively.
If you want to save the number of preset stations bigger than 10, please use +10, 1-10 button.
Example 1, to save the 14th preset station, firstly press +10 then press and hold 4 (10+4=14).
Example 2, to save the 20th preset station, firstly press +10 then press and hold 10 (10+10=20).
Listen to the radio presets.
Preset station list
Press PRESET button on unit or SCAN/PROG. button on remote control once, Preset list will be displayed. Rotate the SELECT button on unit or button on remote control to select your desire preset station, press SELECT button on unit or on remote control to confirm.
Number button
Press (1-10, +10) number buttons on remote control to recall the station in preset channel.

BLUETOOTH FUNCTION

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by New One S.A.S is under license. Other trademarks and trade names are those of their respective owners..
Pairing a Bluetooth Device

1. When the unit is on, repeatedly press SOURCE button to select Bluetooth icon . The display will show “Connecting…” to indicate that it is in pairing mode.
2. On the Bluetooth device, enable Bluetooth and select “M-695DBT” from the Device List. (Refer to the user manual of the device to be connected for detailed operations.)

If the Bluetooth device prompts for a pass code, use “0000”. Some Bluetooth devices will ask you to accept the connection. If the units are paired properly, you will hear the indication sound. The display will show “Connected”.
Note:

•  If you want to connect your Bluetooth speaker to another Bluetooth audio device, long press to disconnect current device first and follow the steps above to make a new connection.
• On some devices such as computers, once paired you must select the unit from the Bluetooth menu and choose “Use as Audio Device (stereo)” or similar.
• Pairing remains intact when the unit and/or your Bluetooth device is taken out of communication range. An active connection will be re-established when your Bluetooth device returns within range.
• When the unit is turned on again, it will automatically try to reconnect with the most recently paired Bluetooth device.

Using a Bluetooth Device

1. With a unit paired (see previous section), operate your Bluetooth device and its sound will be heard through the M-695 DBT’s speakers.
2. Press the button to pause playback. Press again to resume playback.
3. Select desired track with .
4. Adjust the volume using the Volume buttons. You can also adjust the volume on the device to which you are paired.

Using a NFC Device
NFC (Near Field Communication) is a technology that enables short-range wireless communication between NFC-enabled devices, such as mobile phones.

1. When the unit is on, repeatedly press SOURCE button to select Bluetooth icon 
2. . The display will show “Connecting…” to indicate that it is in pairing mode.
3. Enable NFC and Bluetooth on your Bluetooth device (see the user manual of your device for details), tap the NFC device on the NFC tag on unit until you hear an indication voice. The display will show “Connected”. The NFC device is connected to this unit via Bluetooth.
4. Select and play audio files or music on your NFC device.
5. To break the connection, tap the NFC device with the NFC tag on this unit again.
   Note: The operational range between the main unit and a NFC device is approximately 10 meters.

STEREO PAIRING
This function makes it possible for you to get stereo surround sound quality. It requires two Bluetooth speakers M-695 DBT to realize the real Bluetooth radio channel wireless separation, therefore, you’ve got to purchase two M-695 DBT. Tips: it is suggested that the distance between the main speaker and secondary speaker is within 4 meters.

1. Turn on two Bluetooth speakers M-695 DBT.
2. When both speakers are in pairing mode, press the button on one Bluetooth speaker which will become the main speaker (left channel) until you hear the indication voice “Searching”, then it will search and connect to the secondary speaker (right channel). They will recognize the left and right channel automatically. You will hear the indication voice “Stereo Pairing” when the two speakers are connected successfully.
3. Connect your main speaker to Bluetooth enabled device (e.g. smart phone).
4. Play your song and listen to the sound in stereo.
5. Press button on either speaker to pause playback. Press again to resume playback.
6. Press and hold button on the main speaker to disconnect the stereo pairing.

Hereby, NEW ONE S.A.S, declares that this MUSE M-695 DBT is in  compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.muse- europe.com

LISTENING TO DISC

1.  When the unit is ON, repeatedly press SOURCE button to select CD icon . The display will show “Reading…”. Press  to open the disc tray.
   Insert a disc with label side facing up. Press again to close the disc tray. (Note: If there is no disc inserted, the display will show “ NO DISC ”).

2. After a few seconds, the total number of tracks will appear on display for a few seconds and playback starts automatically.

USB PLAYBACK

1. Connect an USB device to the USB MP3 port on unit.
2. Repeatedly press SOURCE button to select USB icon . The display will show “Reading…”. It will start to playback automatically after few seconds.
3. Select desired track with .

Notes:
– The total number of MP3 files on the USB device should not exceed 999.
– The device may not contain more than 99 directories.
– The reading time takes about a few seconds or more depending on the amount of MP3 files and folders on USB device.
– Do not put anything other than a USB device to the port of this unit. Other objects may damage the USB mechanism.
– The USB socket must not be connected to the computer directly, for that may damage the unit.
– There are many USB devices in the market. We cannot guarantee to support all different models. Please try another USB device if your device is not supported.

PLAY MODES (CD/MP3)

Repeat playback
Press REP. button on remote control repeatedly to select a play mode, Repeat indicator will lights up
– Repeat One: display shows “ ”.
– Repeat folder: display shows “ ”. (MP3 only)
– Repeat All: display shows “ ”.
To cancel repeat playback, press REP. button repeatedly until repeat indicator disappears.
Random playback
Press RAND. button on remote control. Random indicator “ ” lights up. It will play all tracks in random order. Press RAND. button again to cancel this function. Random indicator lights off.
Program playback

1. In stop mode (press ****button once), press PROG. button on remote control. The display will show “ 01” and 01/xx (xx is total number of track).
2. Select the desired track with , then press PROG. button to confirm.
3. Repeat above steps to program up to 32 tracks for CD and 99 tracks for MP3.
4. Press to start program playback.
5. Press button on remote control once to stop the program playback. Press twice to cancel this function.

Select a folder (mp3 only)

• Press on remote control to select the first track of next folder of your current disc or USB.
• Press on remote control to select the first track of previous folder of your current disc or USB.

By number buttons 1~10
Use the number buttons to input the track number, and it will start playback from the selected track automatically.
If you want to input the track number bigger than 9, use the 1~10 button.
Example 1, to select the 10th track, firstly press 1 then press 10
Example 2, to select the 14th track, firstly press 1 then press 4 (1+4=14)
Example 3, to select the 40th track, firstly press 4 then press 10 (4+10=40)
Example 4, to select the 305th track, firstly press 3 then press 10, and press 5 (3+10+5=305)

CONNECTING AUXILIARY SOURCE

To 3.5mm AUX IN jack

1. Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack of unit (cable included).
2. Press SOURCE button repeatedly to select AUX icon “ ”.
3. Start playback from your auxiliary source.
4. Adjust the volume to desired level.
5. To stop playback, disconnect your auxiliary source from the AUX IN jack.

SETTING MENU

When the unit is on, press and hold MENU button to access setting menu.
Rotate SELECT knob to select an option and/ or adjust the setting, then press SELECT to confirm.
Note:
– The “ ” will be displayed next to the current setting.
– When do the setting in the menu, press the MENU button to return back to previous step.
DAB setting menu
Station List
Show a full list of DAB stations available.
Full Scan
This function allows you to automatically scan and create a list of receivable DAB broadcasts.
Manual tune
This function can be used to assist the positioning of antenna or the unit, to enhance specific channel or frequency reception ability.
Rotate SELECT knob to select and press SELECT to confirm. Rotate SELECT to select your desired frequency and press SELECT to tune to the station for the selected frequency.
Station order
Multiplex: Stations are listed in numerical and then alphabetical order.
Alphanumeric: Stations are listed in alphabetical order.
Active: stations are listed according to the signal strength of stations DRC (Dynamic range compression)
DRC can make quieter sounds easier to hear when the unit is used in a noisy environment.
Rotate SELECT knob to select “Off “, “Low” or “High”, then press SELECT to confirm.
DRC off – no compression. This is the default setting.
DRC low – medium compression.
DRC high – maximum compression.
Note: DRC is effective only in dynamic range compression broadcast.
Prune station
Remove stations that are listed but unavailable.
The display will show ”This will remove all invalid stations, continue?”
Rotate SELECT to select “Yes” and press SELECT to confirm.

Main menu

Time setup
Set time
Set date (DD/MM/YYYY) and time. Refer to the operations in section “SETTING THE TIME AND DATE”.
Clock format
Set time format: 12/ 24 hour clock display
Auto update
No update: show the time from system setting.
From radio: time update from FM or DAB/DAB+.
Alarms
Set the alarms. Refer to the operations in section “SETTING THE ALARM”.
EQ
Select the desired sound effect: Default, Rock, Classic, Jazz, Pop.
Sleep
Set the sleep time. Refer to the operations in section “Sleep function”.
Backlight:
Set the backlight time out / level. Refer to the operations in section “Dimmer”.
Language
To select the desired language of the unit’s menu: English, Français, Deutsch, Nederlands.
Factory Reset
To restore to factory default settings.
Software version
To review the current software version.
FM setting menu
Audio setting
To select between “Stereo or mono” and “Mono only” for the FM radio.
Main menu**
Refer to the operaitons in section “ DAB setting menu / Main menu”.
Note: In Bluetooth, Disc, USB, or AUX mode, press and hold MENU button to enter “Main menu” for setting. Refer to the operaitons in section “DAB setting menu/ Main menu”.

MAINTENANCE

Cleaning
WARNING: Disconnect the unit from the mains supply before cleaning.
– Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
– Using solvents, abrasive or alcohol-based products risks damaging the appliance.
– If an object or liquid enters inside the appliance, unplug it immediately and have it checked by an authorized engineer.
Notes on disc

• Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunctions.
• Do not place more than one disc in the disc compartment.
• Do not try to open the disc compartment during playing.
• Do not touch the lens. Doing so may cause malfunction.
• If there is a scratch, dirt or finger prints on the disc, it may cause tracking error. Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. Don’t store discs in places with high temperatures or high humidity, they can become warped. After playing, store the disc in its case.
  Important Note
  • Before transporting the unit, remove the disc from the disc compartment.

NOW PLAYING INFORMATION

While a station is playing, the display shows its name and DLS (Dynamic Label Segment) information transmitted by the radio station such as program name, track title and contact details. When you short press MENU button on unit or INFO. button on remote control each time, the next set of information is displayed, cycling through:
DAB mode:
Program type, ensemble name, DAB variant/ channel number, region, date/ channel number, frequency, bit rate, codec/ signal error rate, signal strength/ Radio text
FM mode:
Radio Text/ Program Type, signal strength, date
ERROR MESSAGES
‘Not available’:…….No DAB reception
‘No DAB station’:………….The listed station cannot be found.
(No name):………….The current station does not broadcast an identify name.
‘No station found’:             No DAB stations are available, check/move the antenna
‘No Radio Text’:,……..No RDS text information is available on this station.
‘No program type’:………… No RDS program type information is available.

TECHNICAL SPECIFICATION

GENERAL
POWER SUPPLY: DC 9V
Consumption: 18W
BLUETOOTH
Bluetooth Version: V5.0
Bluetooth: 2.402-2.48GHz
RF Output Power: -2.889dBm
Working Distance: Up to 10 meters measured in open space (wall and structures may affect range of device)
RADIO
FM: 87.5-108MHz
DAB/DAB+: 174.928-239.200 MHz
Specifications are subject to change without notice.

TROUBLESHOOTING GUIDE

Should this unit exhibit a problem, check the following before seeking service:
No Power

• Make sure unit is connected to AC power.

No Sound – General

• External device’s volume is set to minimum; raise volume.
• The M-695 DBT’s volume is set to minimum; raise volume.

The Bluetooth device cannot pair or connect with the unit.

• You have not activated the Bluetooth function of your device. Refer to the user manual of your device to activate Bluetooth function.
• The unit is not in pairing mode. Press and hold ****the button until the Bluetooth indicator blinks fast.
• The unit is already connected with another Bluetooth device; disconnect that device and then try again.

MORE INFORMATION

CAUTION: To reduce the risk of electric shock, do not open the device, there is no party inside for the user. Refer all servicing to qualified personnel.
****The lightning with the arrow symbol in the triangle is a warning sign alerting the user to “dangerous voltage” inside the unit.
The exclamation point in the triangle is a warning sign alerting the user of important instructions accompanying the product.
The Caution mark is located at the back of the device.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: Invisible laser radiation when open and interlocks defeated.
Avoid exposure to beam.
This compact disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT marking is located on the back cabinet.

IMPORTANT
– The use of apparatus in moderate climates.
– The Marking plate is located at the back of the device.
– Make sure to have a minimum distance of 5 cm around the unit for sufficient ventilation.
– Ensure that the ventilation openings is not covered with items such as newspapers, tablecloths, curtains, etc.
– Do not place naked flame sources, such as lighted candles on the apparatus.
– Do not expose this appliance to dripping or splashing water.
– Do not place objects filled with liquids, such as glass, vase on the device.
– Do not throw batteries into fire! Respect the environment when disposing of used batteries.
– Batteries should not be exposed to excessive heat such as sunshine, fire or other similar heat source.
– The power plug is used as a disconnect device and must be easily accessible. To be completely disconnected from the power, the plug of the appliance should be disconnected completely. The socket must not be  obstructed and should be easily accessible during intended use.
– Under the influence of fast transient and / or electrostatic electric phenomenon, the product may malfunction and the user must perform a power reset of the device.

If in the future, you need to get rid of this product, please note that Waste electrical products should not be disposed of with household waste. Recycling facilities exist. Check with your municipality or ask your dealer for advice. (Directive for Waste Electrical and Electronic Equipment)

NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France

References

• MUSE Electrical – Discover our collection ! - MUSE
• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>