muse HS-10 MVMT Wireless Headphone Instruction Manual

MVMT

Wireless Headphone/HS-10
INSTRUCT IO MANUAL HP 6613

TURN ON / OFF

Function Keys are located in RIGHT earcup.

Press and hold button for 3 seconds, Blue LED light will turn on and the device is active.
Press and hold button for 5 seconds while device is turned on. Red LED will flash and device will be turned off.

BLUETOOTH CONNECT

1. Power the device on. Blue and Red LED lights will flash. Device is on pairing mode.
2. Turn on your device’s Bluetooth from the Bluetooth menu and select “MVMT_HP6613”.
3. When paired successfully the device will make a tone to confirm the connection has been made to your device.
4. Remember to turn the earbuds off after each use to ensure longest play time.
   Note: The headphones will reconnect automatically if your device has been paired Previously. Depending on your device’s type and configuration, manual reconnection may be required each time

CHARGING

Use the cable provided to connect the charging case to the power supply.

PORTS

FUNCTION KEYS

Function Keys are located on RIGHT earcup

| |
---|---|---
Press & Hold: Volume Down
Single Press: Previous Track| Press & Hold
(3 sec) Turn Device ON
(5 sec) Turn Device OFF
Single Press: Play/ Stop
Double Press: Redlal| Press & Hold: Volume Up
Single Press: Next Track

©2022 Argento SC, All Rights Reserved.
Distributed by Argento SC, New York, NY 10018
Designed in USA. Made in China.

MVMT and MVMT logo are registered trademarks of Argento SC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Argento SC is under license.
www.argentosc.com
support@argentosc.com

  WARNING: The artwork and design of this package are protected by United States Copyright law and may not be reproduced, distributed, displayed, published, or used for any purpose without prior written permissipn. You may not alter or remove any trademark or copyright notice from this package. Because of continuous improvements, images and product specifications on packaging may differ slightly from actual product.

FCC Disclaimer:
This device Compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication

Electronic and electrical devices disposal
This symbol indicates that electrical and electronic device is to be collected separately

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste
• If the device use batteries, they must be removed from the device and disposed in a appropriate collection center.
• If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.

PARAMETERS

Bluetooth version: v5.0
Frequency: 2.4GHz-2.48GHz
Impendance: 40mm dia /320
Battery capacity: 200mAh
Total playtime·: 8 hours
Charging time: 2. 5 hours
Bluetooth range: Up to 30 ft

• Depends on individual use :
  Warning: To prevent possible hearing damage, do not listen at high volume levels for long periods.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>