VIVOTEK SD9384-EHL 5MP Speed Dome Network Camera Installation Guide
- June 6, 2024
- Vivotek
Table of Contents
VIVOTEK SD9384-EHL 5MP Speed Dome Network Camera
Warning Before Installation
The product must be installed and protected in a location that is not easily accessible, and is away from impacts or heavy vibration. For example, at the location where the surveillance cameras are looking down or installed at high positions such as on a pole, wall, or at least 3 meters above the ground.
- The product should be used in compliance with local laws and regulations.
- Do not install the product on an unstable mount or surface.
- Do not disassemble the camera or perform maintenance task when power is connected.
- Before installation, the product should be stored in a dry and ventilated environment.
- Use only accessories that comply with the technical specifications of the product.
- Please contact VIVOTEK’s certified dealers for power adapters.
Package Contents
Power source | Power Consumption |
---|---|
AC 24V & DC 48V | Max. 51W ( Heater & Fan on );Max 45W ( Heater & Fan off ) |
High power PoE (IEEE
802.3 BT class 6)
| Max. 51W ( Heater & Fan on );Max 45W ( Heater & Fan off ), using VIVOTEK’s
AP-GIC-011A-095
Hardware Installation
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Step 18
Step 19
Step 20
Step 21
Step 22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>