IKIER R1 Rotary Chuck Instruction Manual

IKIER R1 Rotary Chuck

Product Specifications

• Model: F03-0108-0AA1
• Versions: B

Product Usage Instructions

Packing List
The packing list includes various components necessary for the operation of the laser engraver, such as chuck body assembly, support column assembly, different types of jaws, heightening feet, and other accessories.

Heightening Feet Installation
When working with the chuck to engrave or cut wide surface objects, follow these steps to install the heightening feet:

1. Attach the heightening feet accessories to raise the laser engraver for engraving or cutting taller objects.
2. Refer to the Chuck and heightening feet diagrams for proper installation.

Connection Cable Use
Ensure correct connection of the black and white plug wires for the chuck:

• White plug cable is for connecting to IKIER laser engraving machine.
• Black plug cable is for connecting to third-party laser engraving machines.
• Make sure to connect the wires in the correct sequence as per the provided instructions.

Product Use Introduction
The laser engraver supports engraving on various shapes such as rings, circles, cylindrical goblets, spheres, and more within specified dimensions. Use appropriate software for operation.

Installation Guide
Follow these steps for installing the chuck:

1. Ensure the chuck rotation direction: Clockwise for locking and counterclockwise for unlocking.
2. Install L-shaped jaws by following the provided method and tighten the screws properly.

LightBurn Software Use
For using the LightBurn software with the laser engraver, refer to section 6 in the user manual for detailed instructions on software functionality and settings.

Notes
Refer to section 7 in the user manual for important notes and additional guidelines for operating the laser engraver effectively.

Frequently Asked Questions (FAQ)

• Q: How do I adjust the height of the laser engraver for different objects?
  A: You can install the heightening feet accessories to raise the laser engraver when working with taller objects. Refer to section 2 in the user manual for detailed instructions on heightening feet installation.

• Q: Which software should I use with this laser engraver?
  A: The R1 chucking kit supports IKIER and third-party laser cutters and engravers. Use appropriate software compatible with your device for operation. Refer to section 4 in the user manual for product use introduction.

Packing list

Heightening feet installation

1. When you need to work with the chuck to engrave or cut wide surface objects, you need to install the heightening foot. The laser engraver can be raised to engrave or cut taller objects by installing heightening foot accessories.

Connection cable use

1. The chuck has two connecting wires, black plug and white plug, note that they are wired in a different order and need to be connected carefully.
   • 4PIN white plug cable for connecting IKIER laser engraving machine.
   • 4PIN black plug cable for connecting to third party laser engraving machine.

The R1 chucking kit supports IKIER and third party laser cutters and engravers. You need to connect it to the device and use the appropriate software to operate it. If you cannot connect it, please change the order of the wires and change the processing as shown in Figure 1.1-1.2.

product use introduction

Installation guide

• Step 1: Direction of chuck rotation
  Clockwise for locking, counterclockwise for unlocking

• Step 2 (A1): Installation of L-shaped jaws (method 1)

Key points of operation: the sphere should stick to the three jaws as far as possible, and then The suction cup of the rear support column is attached to the sphere, and then tightened screw. When disassembling the ball, you can put the chuck Loosen, then move the support column back.

Note

1. When engraving a curved surface, take the average value of the diameter/circumference of the actual engraving range of the measured object (the average value of the left, middle and right of the engraving range position)
2. When tilting and engraving, adjust the appropriate position of engraving by rotating the button
3. Round bottom object engraving

Step 2 (A1) : Installation of L-shaped jaws (method 2)

Note

1. When engraving a curved surface, take the average value of the diameter/circumference of the actual engraving range of the measured object (the average value of the left, middle and right of the engraving range position)
2. When tilting and engraving, adjust the appropriate position of engraving by rotating the button
3. Round bottom object engraving

Step 2 (B1): Installation of step jaws jaws (method 1)

Key points of operation: The sphere should be flattened by the three claws, and then the support column Flatten the sphere with the suction cup, and then tighten the screws. Disassemble the sphere, you can loosen the chuck first, and then move the support back column.

Note

1. When engraving a curved surface, take the average value of the diameter/circumference of the actual engraving range of the measured object (the average value of the left, middle and right of the engraving range position)
2. When tilting and engraving, adjust the appropriate position of engraving by rotating the button
3. Round bottom object engraving

Step 2 (B2): Installation of step jaws jaws (method 2)

Note

1. When engraving a curved surface, take the average value of the diameter/circumference of the actual engraving range of the measured object (the average value of the left, middle and right of the engraving range position)
2. When tilting and engraving, adjust the appropriate position of engraving by rotating the button
3. Non-circular bottom object engraving

Step 2 (C1): Installation of hexagonal jaws

Key points of operation: when engraving a curved surface, take the measured object Diameter/-circumference average of actual engraving range (engraving The three values on the left, middle and right of the range position are equal mean)

Note:

1. When tilting and engraving, use the motor rotation button to adjust the appropriate position for engraving

LightBurn software use

1. Add “Start Rotation” to the main window
   

2. Click “Settings” on the toolbar

3. In the settings window, open the “Show rotation in main window to enable” button and click OK.

4. Open the Rotation Settings window and set the parameters

5. Open the Rotation Settings window: click “Laser Tools” on the toolbar, then click “Rotary Setup”

6. Set the correct parameters in the rotation setting window: as shown in the figure
   Steps:

7. Select the type of rotation: Chuck

8. Open “Enable Rotary”

9. Select “Y-axis” rotation axis

10. Enter the parameters of the rotating device (fixed value)

11. Enter your object parameters: the actual measured diameter or circumference of the object to be measured

12. Import the pattern you want to engrave, set the size of the pattern, and set the power and speed of the engraving.

13. You can click “Frame” to preview the position of the engraving pattern, and then move the laser head to the desired position. It is recommended to use “Current Position” for the start position and click “Start” when you have finished setting.

Notes

1. Make sure you have placed the chuck module parallel to the working area of the engraving machine before rotating the engraving, otherwise the pattern engraved on the object may be deformed
2. Try to make the three contact surfaces of the object under test and the jaw assembly flat
3. When the sphere needs to be removed after engraving, first loosen the chuck knob and then loosen the bracket fixing knob
4. Do not forget to update the parameters of the measured object in the rotation setting window every time you change the measured object
5. Turn off “Enable Rotary” in the main window when plane engraving, otherwise the engraving pattern will be deformed
6. If you are using this product for the first time, please read the accompanying materials carefully to improve your experience. If you do not use the product in accordance with the instructions and requirements or due to mishandling of the product, etc., IKIER shall not be liable for any loss resulting therefrom.
7. IKIER has carefully checked the contents of the manuals, but there may still be errors or omissions. IKIER is committed to continually improving the functionality of its products and the quality of its services, and therefore reserves the right to change any manuals and the products or software described in the contents of the manuals without prior notice.

Customer ser ice:
For detailed warranty policy, please visit our official website: www.atomstack.net, www.ikier.com
For technical support and service please email support@atomstack.net , support@ikier.com

Manufacturer:
Shenzhen IKIER Technology Co., Ltd.

Address:
Room 422, Building 1, Xili Mingliang Science and Technology Park, No. 178,
Zhuguang North Road, Nanshan District, Shenzhen City, Guangdong Province, China, Zip
Code: 518172

Scan QR code
QR code reader/barcode scanner or any app with a scanner

References

• Atomstack Official Store - Laser Engraving Machine
• Smart Laser Engraver and Cutting Machines – iKier

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>