ZEAPON PS-E1 PONS Motorized Pan Head Instruction Manual
- June 6, 2024
- ZEAPON
Table of Contents
ZEAPON PS-E1 PONS Motorized Pan Head Instruction Manual
Function Introduction
Name
|
Function
---|---
S1/c4reRwetractable Rotary| Compatible with the device with 1/4 screw cap
S3/c8reRwetractable Rotary| Compatible with the device with 3/8 screw cap
Tilt Head Slot| After being connected with the PONS tilt arm kit through the
Tilt head slot the PONS motorized pan head can be expanded to a PONS PT head.
Left Button| Enables the pan head to turn clockwise
Right Button| Enables the pan head to turn anticlockwise
Power Button| Power switch/functional operation
Speed Indicator Lamp| Display three speed states. one lamp means low speed,
Two Lamps mean Medium speed three lamps mean high speed.
Power Indicator Lamp| Green: full power Yellow: half power Red: low power
Blue: power on
Signal Emission Zone| The zone for receiving and sending signals. Do not block
it
Battery Lock| Used to lock the battery
2.5mm Shutter Cable Socket| Connects the camera directly through the shutter
cable, ensuring that the uniaxial pan head controls the camera to take
pictures and record video
USB Type-C Socket| Used to power the pan head (5V-2A)
Battery Compartment| Compatible with F550/F750/F970 standard lithium battery
Rail Slider Connecting Seat| A special accessory for ZEAPON motorized rail
slider series. It is flexible to disassemble and can be used with other
devices
Function
| Button Action|
Beep
Power on| Press and hold the power button for 3 s| /
Power off| Press and hold the power button for 3 s| /
Left Rotation| Press and hold the left button| /
Right Rotation| Press and hold the right button| /
Speed Adjustment| Click the power button once| /
Create the point| Double click the power button twice| Creation point 1 rings
once
Creation point 2 rings twice
Delete all points| + Press and hold the left button the right button| Rings
long once
Start operation| Double click the power button twice| /
Starts/Pauses circulation| Click the left/right button + the power button|
Rings once
Automatic left and right/| Double-click left/right buttons| /
Note:
The vertical load of pan head is ≤ 4 kg;
The horizontal load is ≤50 kg;
Method of Use
- Take out the rail slider connecting seat from the bottom of the pan head.
- Install the pan head on the tripod.
- Install the ball head on the pan head.
- Install the quick-mount plate to the bottom of the device.
- Install the device installed with the quick-mount plate on the pan head.
Expanding Use
In combination with the ZEAPON motorized rail slider series, the PONS motorized pan head can realize the linkage between the rail slider and the pan head.
With the help of the connection kit, two pan heads can be expanded to a PONS PT Head immediately, realizing the rotation of pan axis and tilt axis.
Use scene of the PONS PT Head
Function description
Important
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. in
portable exposure condition without restriction.
Warm Hint
Please search for Zeapon Lab in all major application markets or on ZEAPON’ s official website to download and install the pan head APP!
Notice: Batteries or battery chargers must be purchased separately.
Thank you for your use! If the internal structure of the pan head is
dismantled without authorization, the product will not be covered by the
warranty service!
Log in to the official website to watch the detailed video of the operation: https://www.zeapon.com
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- Alza | Alza.fr
- alza.hu
- alza.sk
- ZEAPON - Home
- 至品创造
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>