inventor PSC18155W Refrigerator Bottom Freezer User Manual

inventor PSC18155W Refrigerator Bottom Freezer

Specifications

• Model: PSC18155W PSC18155IN
• Language: English

Product Information

The refrigerator is designed to provide efficient cooling forfood storage. It comes with safety features and guidelines toensure proper usage and maintenance.

Product Usage Instructions

Safety Warnings
Please read and follow all safety warnings provided in the user manual to prevent accidents and ensure safe operation of the refrigerator.

Daily Use

• Ensure the appliance is plugged into a proper electrical outlet
• Use the temperature controls to adjust the cooling settings
• Clean the interior regularly to maintain hygiene
• Avoid overloading the refrigerator to ensure proper airflow

Care and Cleaning

• Defrost the refrigerator regularly as recommended
• Clean the drain to prevent water accumulation
• Use mild detergent and water to clean the interior and exterior surfaces
• Avoid using abrasive cleaners that may damage the finish

Installation

• Ensure proper electrical connection
• Check for any damages before installation
• Do not connect if damaged, contact the retailer for assistance

Service and Maintenance

• Any electrical components should be serviced by certified personnel only
• Use recommended light bulbs for replacements
• Follow energy-saving tips to reduce consumption

FAQ

• Q: How often should I defrost the refrigerator?
  A: It is recommended to defrost the refrigerator when ice build-up exceeds 0.5 inches to maintain optimal performance.

• Q: Can I use cleaning chemicals inside the refrigerator?
  A: It is advised to use mild detergent and water for cleaning to avoid damaging the interior surfaces.

MODEL:

• PSC18155W
• PSC18155IN

Safety Warnings

In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure thatthey remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.
For the safety of life and property keep the precautions of these user’s instructions as the manufacturer is not responsible for damages caused by omission.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given super vision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children aged from 3 to 8 years are allowed to load and unload this appliance.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and above and supervised.
• Keep all packaging well away from children. There is risk of suffocation.
• If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to avoid accidents from minors or even possible electric shock.
• If this appliance featuring magnetic door seals is to replace an older appliance having aspring lock (latch) on the door or lid, be sure to make that spring lack unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.

General safety

• WARNING! Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

• WARNING! Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

• WARNING!Do not damage the refrigerant circuit.

• WARNING! Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacture.

• WARNING! Do not touch the light bulb if it has been on for a long period because it could be very hot1)

• WARNING! When positioning the appliance, ensure the supply cord is not trapped or damaged.

• WARNING! Do not locate multiple portable socket outlets or portable power suppliers at the rear of the appliance.

• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

• The refrigerant isobutane (R-600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.

• During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged.

  • avoid open flames and sources of ignition -thoroughly ventilate the room in which the appliance is situated

• It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit, fire and/or electric shock.

• This appliance is intended to be used in household and similar applications such as

  • staff kitchen areas in shops, offices and other working environments;
  • farm houses and by clients in hotels, motels and other residential type environments;
  • bed and breakfast type environments;
  • catering and similar non-retail applications.

• WARNING!! Any electrical components (plug, power cord, compressor and etc.) must be replaced by a certified service agent or qualified service personnel.

• WARNING! The light bulb supplied with this appliance is a “special use lamp bulb” usable only with the appliance supplied. This “special use lamp” is not usable for domestic lighting.

• Power cord must not be lengthened.

• Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire.

• Make sure that you can come to the mains plug of the appliance.
  • Do not pull the mains cable.

• If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock orfire.

• You must not operate the appliance without the lamp.

• This appliance is heavy. Care should betaken when moving it.

• Do not remove nor touch items from the freezer compartment if you hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appliance to direct sunlight.

Daily use

• Do not put hot on the plastic parts in the appliance.
• Do not place food products directly against the rear wall.
• Frozen food must not be re-frozen once it has been thawed out.
• Store pre-packed frozen food in accordance with the frozen food manufacture s instructions.
• Appliances manufactures storage recommendations should be strictly adhered to. Refer to relevant instructions.
• Do not place carbonated of fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.
• Ice lollies can cause frost burns if consumed straightfrom the appliance.
• To avoid contamination of food, please respect the following instructions
• Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
• Clean regularly surfaces that can come in contact with food and accessible drainage systems.
• Clean water tanks if they have not been used for 48h; flush the water system connected to a water supply if water has not been drawn for 5 days.
• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
• Two-star frozen-food compartments (if they are presented in the appliance) are suitable for storing pre-frozen food, storing or making ice-cream and making ice cubes.
• One-, two-and three-star compartments (if they are presented in the appliance) are not suitable for the freezing of fresh food.
• If the appliance is left empty for long periods, switch off, defrost, clean, dry and leave the door open to prevent mount developing within the appliance.

Care and cleaning

• Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.1)
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in te bottom of the appliance. 2)

Installation

Important For electrical connection carefully follow the instructions given in specific paragraphs.

• Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the fluids to flow back in the compressor.
• Adequate air circulation should be surrounding the appliance, lacking may lead to overheating. To achieve sufficient ventilation follow the instructions relevantto installation.
• Wherever possible the spacers of the product should be against a wall to avoid touching or catching warm parts (compressor, con-denser) to prevent possible burn.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.

Service

• Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person.
• This product must be serviced by an authorized Service Center, and only genuine spare parts must be used.

Energy saving

• Don’t put food in the appliance;
• Don’t pack food close together as this prevents air circulating;
• Make sure food doesn’t touch the back of the compartment(s);

Safety Warnings

• If electricity goes off, don’t open the door;
• Don’t open the door frequently;
• Don’t keep the door open for too long time;
• Don’t set the thermostat on exceeding cold temperatures;
• Some accessories, such as drawers, can be removed to get larger storage volumes and lower energy consumption.

Environment Protection

This appliance does not contain gasses that could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed of according to the appliance regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially the heat exchanger.
The materials used on this appliance marked by the symbol are recyclable.
The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. For more detailed information about recycling this product, please contact your local council, your household waste disposal service, or the shop where you purchased the product.

Packaging materials
The materials with the symbol are recyclable. Dispose of the packaging in suitable collection containers to recycle it.

Disposal of the appliance

1. Disconnect the mains plug from the mains socket.
2. Cut off the main cable and discard it.

WARNING! During use, service, and disposal of the appliance, please pay attention to the symbol similar to the left side, which is located on the rear of the appliance (rear panel or compressor) and with yellow or orange color.
It’risk of fire warning symbol. There are flammable materials in refrigerant pipes and compressors. Please be far away fire source during uuse service and disposal.

Name of Components

Note : All photos included in this User’s Manual, are for explanatory purposes only, and may differ from the actual product.

Installation

Space Requirement

• Select a location without direct exposure to sunlight;
• Select a location with enough space for the refrigerator doors to open easily;
• Select a location with level {or nearly level) flooring;
• Allow sufficient space to install the refrigerator on a flat surface;
• Allow clearance to the right, left, back, and top when installing. This will help reduce power consumption and keep your energy bills lower.
• Keep at least 50mm gap at two sides and back.

Positioning

• Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance: for refrigerating appliances with climate class:
• Sub Normal temperate: this refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C;(SN)
• Normal: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C;(N)
• subtropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C;(ST)
• tropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C;(T)

Location

• The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight, etc. Ensure that air can circulate freely around the back of the cabinet. To ensure the best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 50 mm. Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate leveling is ensured by one or more adjustable feet at the base of the cabinet.
• This refrigerating appliance is not intended to be used as a built-in appliance.
• Warning! It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The appliance must be earthed. Thepower supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician. The manufacturer declines all responsibility if the above safety precautions are not observed. This appliance complies with the E.E.C. Directives..

Door Reversibility
Before reversing the door, please prepare below tools and materials below: straight screwdriver, cross screwdriver, spanner and the components included in the poly bag:

1. Unscrew top hinge cover and then unscrew the top hinge. Then lift the upper door and place it on a soft pad to avoid scratches and damage.
2. Remove the top left screw cover.
3. Take off the upper door, take out the screw from the middle hinge by a cross screwdriver,then take off the lower door.
4. Laying down the refrigerator, take out the adjusting feet as below, then take off the lower hinge by cross screwdriver.
5. Adjusting the hinge core position of the lower hinge and upper hinge to opposite position
6. Install the lower hinge under to the refrigerator like below, screw in the adjusting feet, and make sure the position in the horizon.
7. Detach the Fridge and the Freezer door gaskets and then attach them after rotating.
8. Remove the original aid closers from the upper and lower door, then install the aid closers from the internal bag (with instruction manuals) to the opposite side.
9. Install the lower door, adjust and fix the middle hinge onto the cabinet.
10. Place the upper door back on. Ensure the door is aligned horizontally and vertically so that the seal are closed on all sides before finally tightening the top hinge. Then inert the top hinge and screw it to the top of unit and then fix hinge cover (in the accessary bag) by screw.
11. Fix the screw cover.

Install door external handle (if the external handle is present)

Space Requirement

• Keep enough space of door open.
• Keep at least 50mm gap at two sides and back.

Leveling the unit

• To do this adjust the two leveling feet at front of the unit.
• If the unit is not level, the doors and magnetic seal alignments will not be covered properly.

Control Panel

Temperature setting of the Fridge Compartment

1. The fridge temperature setting knob
2. The knob in fridge compartment is used to adjust the temperature of the fridge compartment.
3. The internal temperature is controlled by a sensor. There are 4 settings: OFF, COLD, COLDER and COLDEST. COLD is the warmest setting and COLDEST is the coldest setting.
4. The appliance may not operate at the correct temperature if it is in particularly hot or if you open the door often.
5. Neither fridge nor freezer compartment works when the setting is OFF.

Temperature setting of the Freezer Compartment
The freezer temperature setting slider

FREEZER CONTROL

• This slider in the fridge compartment is used to adjust the temperature of the freezer compartment.
• The slider is positioned toward , and the temperature in the freezer compartment will be higher. Contrarily, the temperature in the freezer compartment will be lower if the slider is moved towards
• The middle position of the slider is the advised position for normal use.
• To get the lowest temperature in the freezer compartment, you can adjust the setting knob at coldest and position the slider at

Temperature setting recommendation

• The information above gives users recommendations of temperature settings.
• In winter or with temperature below 16°C, users should avoid set on * and cold.
• For energy saving, the and coldest set only applies to special needs (such as quick-freezing or ice-making) , and need to be turned back after special needs.

Daily Use

First use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap to remove the typical smell of a brand-new product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.

Daily use
Position different food in different compartments according to be below table

Freezing fresh food

• The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.
• Place the fresh food to be frozen in the bottom compartment.
• The maximum amount of food that can be frozen in 24 hours is specified on the rating plate.
• The freezing process lasts 24 hours: during this period do not add other food to be frozen.

Storing frozen food

appliance sta at least holes on the higher use. store putting the product in the compartment let the
Important! In the event of accidental defrosting, for example the power has been off for longer than the value shown in the technical characteristics chart under “rising time”, the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked).

Thawing

Deep-frozen or frozen food, before be used, can be thawed in the freezer compartment or at room temperature, depending on the time available for this operation.
Small pieces may even be cooked still frozen, directly from the freezer. In this case, cooking will take longer.

Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.

Positioning the door shelves

Door balconies can be disassembled for cleaning. To make the disassembling as follows: gradually pull the balcony in the direction of the arrows until it comes free, after cleaning, reposition it.

Disassembling the bottom drawer

1. Pull out the bottom drawer to stopper position.
2. Lift up the front of drawer.
3. Pull out the bottom drawer.

Helpful hints and tips

Hints for freezing
To help you make the most of the freezing process, here are some important hints:

• the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate;
• the freezing process takes 24 hours. No further food to be frozen should be added during this period;
• only freeze top quality, fresh and thoroughly cleaned, foodstuffs;
• prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required;
• wrap up the food in aluminum foil or polythene and make sure that the packages are airtight;
• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter;
• lean foods store better and longer than fatty ones; salt reduces the storage life of food;
• water ices, if consumed immediately after removal from the freezer compartment, can cause the skin to be freeze burnt;
• it is advisable to show the freezing in date on each pack to enable you removal from the freezer compartment, can cause the skin to be freeze burnt;
• it is advisable to show the freezing in date on each pack to enable you to keep tab of the storage time.

Hints for storage of frozen food

• To obtain the best performance from this appliance, you should: make sure that the commercially frozen foodstuffs were adequately stored by the retailer; be sure that frozen foodstuffs are transferred from the food store to the freezer in the shortest possible time; not open the door frequently or leave it open longer than necessary.
• Once defrosted, food deteriorates rapidly and cannot be frozen.
• Do not exceed the storage period indicated by the food manufacturer.

Hints for fresh food refrigeration
To obtain the best performance:

• Do not store warm food or evaporating liquids in the refrigerator
• Do cover or wrap the food, particularly if it has a strong flavor

Hints for refrigeration

Useful hints:

• Make (all types): wrap in polythene bags and place on the glass shelves above the vegetable drawer. For safety, store in this way only one or two days at the most.
• Cooked foods, cold dishes, etc…: these should be covered and may be placed on any shelf.
• Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawers) provided.
• butter and cheese: these should be placed in special airtight containers or wrapped in aluminum foil or polythene bags to exclude as much air as possible.
• Milk bottles: these should have a cap and should be stored in the balconies on the door.
• Bananas, potatoes, onions and garlic, if not packed.

Cleaning

For hygienic reasons, the appliance interior, including interior accessories, should be cleaned regularly.
Caution! The appliance may not be connected to the mains during cleaning. The danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains, or switch off orturn out the circuit breaker or fuse. Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, the danger of electrical shock! Hot vapors can lead to the damage of plastic parts. The appliance must be dry before it is placed back into service.
Important! Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or juice form orange peel, butyric acid, and cleanser that contain acetic acid.

• Do not allow such substances to come into contact the appliance parts.
• Do not use any abrasive cleaners
• Remove the food from the freezer. Store them in a cool place, well covered.
• Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker of fuse.
• Clean the appliance and the interior accessories with a cloth and lukewarm water. After cleaning wipe with fresh water and rub dry.
• After everything is dry place the appliance back into service.

Replacing the LED lamp
The internal light is an LED type. To replace the lamp, please contact a qualified technician.

Troubleshooting

Caution Before troubleshooting, disconnect the power supply. Only a qualified electrician of competent person must do the troubleshooting that is not in this manual. Important! There are some sounds during normal use (compressor, refrigerant circulation).

If the malfunction shows again, contact the Service Center.

All the pictures in the manual are for explanatory purposes only. The actual shape of the unit you purchased may be slightly different, but the operations and functions are the same.
The company may not be held responsible for any misprinted information. The design and the specifications of the product for reasons, such as product improvement, are subject to change without any prior notice. Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for further details. Any future updates to the manual will be uploaded to the service website, and it is advised to always check for the latest version.
Scan here to download the latest version of this manual. www.inventorairconditioner.com/media- library

Activate your Warranty

Follow the next quick steps to activate your warranty:

STEP 1
Visit our website via the link:

https://www.inventorairconditioner.com/warranty-inv

or by scanning the QR code, as follows:

STEP 2
Fill in the obligatory fields as requested in the “Owner’s details” and “Unit’s details”:

STEP 3
Click SEND button at the end of the submission form:

STEP 4
Wait for the confirmation email you will receive at the email address you have filled in – please also check your spam folder.

STEP 5
The inventor warranty is now valid!

Manufacturer: INVENTOR A.G. S.A.
24th km National Road Athens – Lamia & 2 Thoukididou Str., Ag.Stefanos, 14565 Tel.: +30 211 300 3300, Fax: +30 211 300 3333 – www.inventor.ac

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>