inventor GLX07014 Washing Machine User Manual

WASHING MACHINE
FRONT LOAD
• USER’S MANUAL MODEL:
GLX07014
GLX08014

SAFETY INSTRUCTIONS

■ Safety Instructions
Please read the following safety information thoroughly and follow it strictly to minimize the risk of fire or explosion, electric shock and to prevent property damage, personal injury or loss of life. Failing to follow these instructions shall void any warranty.
Warning!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in death or serious injuries unless it’s avoided.
Caution!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in Slight or minor injuries or damage to property and the environment.
Note!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in slight or minor injuries.
Warning!
ELECTRIC SHOCK HAZARD

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• If the machine is damaged, it must not be operated unless repaired by the manufacturer, its service agent or similarly qualified persons.
  Risk of electric shock!

• The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Children should be supervised that they do not play with the appliance.

• Children 3 years and under shall be kept away from the appliance or continuously supervised.

• Animals and children may climb into the machine. Check the machine before every operation.

• Do not climb or sit on the appliance.

INSTALLATION LOCATION AND SURROUNDING

• All washing and additional substances are to be kept in a safe place out of the reach of children.
• Do not install the machine on a carpet floor. The obstruction of the openings by a carpet can damage the machine.
• Keep the appliance clear from heating sources and direct sunlight to avoid plastic and rubber parts to corrode.
• Do not use the appliance in humid environments or rooms containing explosive or caustic gas. In case of water leakage or water splashes let the appliance dry in the open air.
• The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the washing machine.
• Do not operate the machine in rooms with a temperature of below 5°C. This can cause damages to parts of it. If itis unavoidable, make sure to drain the water completely from the appliance after every use (see “Maintenance – Cleaning of drain pump filter”) to avoid damages caused by frost.
• Never use flammable sprays or substances in the immediate proximity of the appliance.

INSTALLATION

• Remove all packaging material and transport bolts before using the appliance. Otherwise, serious damage may result.
• This appliance is equipped with a single inlet valve and can be connected to the cold water supply only.
• Mains plug must be accessible after installation.
• Before washing clothes for the first time, the product shall be operated once throughout all the procedures without any clothes inside.
• Before using the washing machine, the product shall be calibrated.
• Do not put any excessively heavy objects on the appliance, like water containers or heating devices.
• The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
• Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05 MPa.

ELECTRICAL CONNECTION

• Make sure the supply cable is not trapped by the machine, it can get damaged.
• Connect the product to a grounded outlet protected by a fuse complying with the values in the “ Technical specifications” table.

The grounding installation has to be made by a qualified electrician.
Ensure that the machine is installed in accordance with the local regulations.

• Water and electrical connections must be carried out by a qualified technician in accordance with the manufacturer’s instructions and local safety regulations.

Warning!

• Don’t use multiple plugs or extension cords.
• The appliance must not have an external switching device such as a timer or connected to a circuit that is regularly switched on and off.
• Do not pull the plug out of the mains outlet if there is flammable gas around.
• Never pull out power plug with wet hands.
• Always pull at the plug, not at the cable.
• Always unplug the appliance if it is not being used.

WATER CONNECTIONS

• Check the connections of the water inlet tubes, the water tap and the outlet hose for possible problems due to changes of water pressure. If the connections loosen or leak close the water tap and get it repaired. Do not use the appliance before the pipes and hoses are installed properly by qualified persons.
• Glass door may become very hot during the operation. Keep children and pets far away from the machine while it is operating.
• The water inlet and outlet hoses have to be safely installed and remain undamaged. Otherwise, water leakage can occur.
• Do not remove the drain pump filter while there is still water in the appliance. Big quantities of water can leak out, and there is a risk of scalding due to hot water.

OPERATION AND MAINTENANCE

• Never use any flammable, explosive or toxic solvents. Do not use gasoline and alcohol etc. as detergents. Only select detergents that are suitable for machine washing.
• Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails, screws, stones etc. may cause serious damages to this machine.
• Remove all objects from pockets such as lighters and matches before use the appliance.
• Thoroughly rinse items that have been washed by hand.
• Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, wax and wax removers should be washed in hot with an extra amount of detergent before being dried in the appliance.
• Items containing foam rubber (latex foam), shower caps, water proof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the machine
• Fabric softeners or similar products should be used as recommended in their instructions.
• Never try to open the door forcefully. The door will unlock shortly after the end of a cycle.
• Please do not close the door with excessive force. If it is found difficult to close the door, please check if the clothes are properly inserted and distributed.
• Always unplug the appliance and close the water tap before cleaning and maintenance and after each use.
• Never pour water over the appliance for cleaning purpose. Risk of electric shock!
• Repairs shall only be carried out by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The producer will not be responsible for damages caused by the intervention of not authorized persons.

TRANSPORT

• Before Transport:
  – Bolts shall be reinstalled to the machine by a specialized person
  – Accumulated water shall be drained out of the machine

• This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door cannot be used as a handle.

INTENDED USE
The product is intended only for home use and for textiles in household amounts suitable for machine washing and drying. This appliance is for indoor use only and not intended for built in use.
Only use according to these instructions. The appliance is not intended for commercial use.
Any other use is considered as improper use. The producer is not responsible for any damage or injuries that may result of it.

• This appliance is intended to be used in household and similar applications such as:
  – Staff kitchen areas in shops, offices and other working environments;
  – Farm houses;
  – By clients in hotels, motels and other residential type environments;
  – Bed and breakfast type environments;
  – Areas for communal use in blocks of flats or in launderettes.

Packaging/Old appliance
**** This marking indicates that this product should not be disposed with other household wastes throughout the EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.To return your used device, please use the collection systems or contact the retailer where the product was purchased. They return and can take this product for environmental safe recycling.

INSTALLATION

■ Product Description

Note!

• The product picture is for illustration only, please refer to real product as reference.

Accessories

| |
---|---|---
4 x Cover caps| 1 x Supply hose cold water| 1 x Owner’s manual

■ Installation
Installation area
Warning!

• Stability is important to prevent the product from wandering! Make sure the machine is standing leveled and stable.
• Make sure that the product does not stand onto the power cord.
• Make sure to maintain the minimum distances from the walls as shown in the picture

Before installing the machine, the location characterized as follows shall be selected:

1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 0°C
5. Keep far away from the heat sources such as coal or gas burning appliances.

Unpacking the washing machine
Warning!

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• There is a risk of suffocation ! Keep all packaging well away from children.

1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packaging. Make sure the small triangle foam (a) is removed with the bottom packaging together. If not, lay the unit down on the side surface and remove it manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.

Remove transport bolts
Warning!

• You must remove the transport bolts from the backside before using the product.

| |
---|---|---
Loosen the 4 transport bolts with a spanner.| Remove the bolts including the rubber parts and keep them for future use.| Close the holes using the cover Caps.

Levelling the washing machine
Warning!

• The lock nuts on all four feet must be screwed tightly against the housing.

1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.

Connect the water supply hose
Warning!
To prevent leakage or water damage, follow the instructions in this chapter

• Do not kink, crush or modify water inlet hose.

Connect the water supply hose to the water inlet valve anda water tap with cold water as indicated.

Note!

• Connect manually, do not use tools. Check if the connections are tight.

Drain Hose
Warning!

• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.

There are two ways to place the end of drain hose:

1. Put it into the water trough.
2. Connect it to the branch drain pipe of the trough.

OPERATION

■ Quick Start
Caution!

• Before washing, please make sure the washing machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any residual water and to neutralize potential odors, it’s recommended to clean your appliance before first use. For this reason, start the Cotton program at 90°C without laundry and detergent.

1. Before Washing Note!
   • Detergent need to be added in compartment | if the pre-wash function is selected.

2. Washing

3. After Washing
   The word “END” will appear on the display

■ Before Each Washing

• The ambient temperature of the washing machine should be 5-40°C. If used under 0°C, the inlet valve and draining system may be damaged. If the machine is installed under freezing conditions, it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose can unfreeze before use.
• Please check your laundry care labels and the detergent use instructions before wash. Use non-foaming or less-foaming detergent suitable for machine washing properly.

| |
---|---|---
Check the care label| Sort laundry according to color and textile type| Take all items out of the pockets
| |
Tie together long textile strips and belts, close zips and button| Put small items into a laundry bag| Turn easy-pilling and long-pile fabric inside out

Warning!

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances like wax, oil, paint, gasoline, alcohol, kerosene, and other flammable materials.
• Washing single clothes items may easily create big eccentricity and cause alarm due to unbalance. Therefore it is suggested to add one or two more laundry items to the wash so that spin can be done smoothly.

■ Detergent Dispenser

| Pre wash
---|---
| Main wash
| Softener
| Release button to pull out the dispenser

Caution!

• Detergent only need to be added in “compartment I “after selecting pre-wash function.

Models: GLX07014 7kg, GLX08014 8kg

Programme| | |
---|---|---|---
ECO 40°C-60°C| | |
Cotton| | |
Synthetic| | |
Mix| | |
Jeans| | |
20°C| | |
Spin only| | |
Rinse & Spin| | |
Bulky/Bedlinen| | |
Baby Care| | |
Wool| | |
Sport Wear| | |
Rapid 45’| | |
Quick 15′| | |
Intensive| | |

Means must
Means optional

Detergent Recommendation

Recommended washing detergent| Wash cycles| Washing temp.| Type of laundry and textile
---|---|---|---
Heavy-duty detergent with bleaching agents and
optical brighteners| Cotton,ECO 40°C-60°C| 40/60| White laundry made from boil-proof cotton or linen
Colour detergent without bleaching agent and optical brighteners| Cotton| 20/40| Coloured laundry made from cotton or linen
Color or mild detergent without optical brighteners| Cotton, Synthetic Coloured laundry made| 20/40| from easy care fibres or synthetic materials
Mild washing detergent| Synthetic| 20| Delicate textiles, silk, viscose
Special wool detergent| Wool| 20/40| Wool

Note!

• Agglomerating or ropy detergent or additive can be diluted in some water before pouring it into the detergent dispenser, to avoid its inlet to get blocked and thus cause a water overflow.
• Please choose the suitable type of detergent to get a maximum of washing performance and a minimum of water and energy consumption
• To achieve the best cleaning result a proper detergent dosing is important.
• Use a reduced detergent amount if the drum is not filled completely.
• Always adjust the amount of detergent to the water hardness, if your tap water is soft, use less detergent.
• Dose according to how dirty your laundry is, less dirty clothes require less detergent.
• Highly concentrated (compact detergent) requires particularly accurate dosing.

Following symptoms are a sign of detergent overdosing:

• heavy foam formation
• poor washing and rinsing result

Following symptoms are a sign of detergent underdosing:

• laundry turns grey
• built-up of limescale deposits on the drum, the heating element and/or the laundry

■ Control Panel
Models: GLX07014 7kg, GLX08014 8kg

Note!

• The chart is for reference only. Please refer to real product as standard.

1. On/Off
   Product is switched On/Off

2. Start/Pause
   Press the button to start or pause the washing cycle

3. Option
   This allows you to select an additional function and will light when selected.

4. Programmes
   Available according to the laundry type.

5. Display
   The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.

6. Drum Clean
   Specially set in this machine to clean the drum and tube.

■ Washing Programmes Table
Model: GLX07014 7kg

■ Washing Programmes Table
Model: GLX08014 7kg

Note!

• The parameters in this table are only for user’s reference. The actual parameters maybe different with the parameters in above mentioned table.

ECO 40°C-60°C is the standard washing program to which the information in the label and the fiche relates, and they are suitable to clean normally soiled cotton laundry and that they are the most efficient programmes in terms of combined energy and water consumptions for washing that type of cotton laundry, that the actual water temperature may differ from the declared cycle temperature.

1. The highest temperature reached by the laundry in the wash cycle for at least 5 minutes.
2. Residual moisture after the wash cycle in water content percent and the spin speed at which this was achieved.
3. The ECO 40°C-60°C programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle. This programme is used to assess the compliance with the regulation (EU) 2019/2023.

The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
Loading the household washing machine up to the capacity indicated for the respective programmes will contribute to energy and water savings.
Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.
Caution!

• If there is any break in the power supply while the machine is operating, a special memory stores the selected programme. The machine will continue the programme when the power supply is re-established.

■ Programmes
Programmes are available according to the laundry type.

Cotton| Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
---|---
Synthetic| Wash synthetic articles, for example: shirts, coats, blending.
While washing the knitting textiles, detergent quantity shall be reduced due to its loose string construction and easily forming bubbles.
Baby Care| Washing the baby’s clothes, it can make the baby’s wear cleaner and make the rinse performance better to protect the baby skin.
Rapid 45′| Washing few and not very dirty clothes quickly.
Mix| Mixed load consisting of textiles made of cotton and synthetics.
Jeans| Specially for jeans.
Quick 15′| Extra short programme approx, suitable for lightly soiled washing as a small amounts of laundry.
Wool| Hand or machine-washable wool or richwool textiles.Especially gentle wash programme to prevent shrinkage, longer programme pauses (textiles rest in wash liquor).
Spin Only| Extra spin with selectable spin speed.
Rinse & Spin| Extra rinse with spin.
ECO 40-60| Default 40°C, not selectable, suitable for laundry washing at about 40°C-60°C
Sport Wear| Washing the active wear.
Bulky/Bedlinen| This program is specially designed for washing Bulky/Bedlinen.
Intensive| To increase the washing effects, washing time is increased.
20°C| Washing brightly colored clothes, it can protect the colors better.

Note!
Reference to your product to select the programmes.
■ Option
Delay
Set the Delay function:

1. Select a programme;
2. Press the Delay button to choose the time(the delaying time is 0-24 H.);
3. Press [Start/Pause] to commence the delay operation

Cancel the Delay function:
Press the [Delay] button until the display be OH.It should be pressed before starting the programme. If the programme already started, should switch off programme to reset a new one.
Caution!

• If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and when the power is restarted, the program will continue.

Models: GLX07014 7kg, GLX08014 8kg

Means Optional
■ Other Functions
Temp.
Press the button to regulate the temperature(Cold,20°C, 40°C,60°C, 90°C)
Speed
Press the button to change the speed.
1200: 0-400-600-800-1000-1200
1400: 0-400-600-800-1000-1200-1400
Models: GLX07014 7kg, GLX08014 8kg

Child Lock
To avoid mis operation by children. Caution!
When child lock is activated and program starts, child lock indicator will switch on, and the CL and remaining time on the display are alternately displayed in 0.5s.
Press the other buttons will make child lock indicator flash for 3s. when program finish,CL and END alternate for 10s in 0.5s, then the child lock lights flash for 3s.

• only press and hold the two button can release child lock, even power off, switch off and program end
• The “Child Lock” will lock all buttons except Power button and Child Lock button
• please release child lock before selecting program and starting washing.

Mute the buzzerTo act the buzzer function, press the button again for 3 seconds. The setting will be kept until the next reset.
Caution!

• After Muting the buzzer function, the sounds will not be activated any more.

Drum Clean
After the machine runs to the set counting period(counting cycle is 25 times), Drum Clean lamp flashes at the end of the last program, reminding the user to run the program;
Release condition:

1. Press and hold the Drum Clean button for 3s, Drum cleaner indicator remind will be cancel and the washing cycles will be recount for another 25 cycles.
2. The counted cycles will be recounted when drum clean program is finished.

MAINTENANCE

■ Cleaning and Care
Warning!

• Always unplug the appliance and close the water tap before cleaning and maintenance.

Cleaning the Cabinet
Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a cloth to wipe it off immediately.
Never use sharp items to clean the appliance. Caution!

• Never use abrasive or caustic agents. formic acids or its diluted solvents or similar substances, like alcohol or chemical products.

Cleaning the Drum
Any rust stains left inside the drum by metal articles must be removed immediately using chlorine-free detergents. Never use steel wool for cleaning the drum!
Note!

• Keep any laundry away from the machine while cleaning the drum.

Cleaning the Door Seal and Glass
Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can cause leakages.
Remove any coins, buttons and other objects from the seal after each wash.
Clean the Door Seal and Glass every month to ensure the normal operation of the appliance.

Cleaning the Inlet Filter
Note!

• Diminishing water flow is a sign that the filter need to be cleaned.

1. Close the tap and remove the water supply hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the backside of the machine. Pull out the filter with long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and reconnect the water supply hose.
6. Clean the Inlet filter every 3 months to ensure the normal operation of the appliance.

Clean The Detergent Dispenser

1. Press down the release [ ] on the softener cover and pull the dispenser drawer out of the recess. Clean the inside of the recess with a brush.
2. Lift the softener cover off the dispenser drawer and wash both items with water.
3. Restore the softener cover and push the drawer back into the recess.

| | |
---|---|---|---
Press the release and remove the dispenser drawer| Clean the dispenser drawer and the softener cover under water| Clean the recess with an soft brush| Insert the dispenser drawer

Note!

• Do not use abrasive or caustic agents to clean plastic parts.
• Clean the detergent dispenser every 3 months to ensure the normal operation of the appliance.

Cleaning the Drain Pump Filter
Warning!

• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the washing.
• Clean the filter periodically to ensure the normal operation of washing machine.

|
---|---
Open the lower cover cap| Open the filter by turning to the counter clockwise
|
Remove extraneous matter| Close the lower cover cap

Caution!

• Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be inserted aligning to hole plates otherwise water may leak.

• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped.
  Rotate lower cover cap directly to make water run into basin.

• When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.

■ Trouble Shooting
Whenever there is a problem with the appliance, check if you can solve it following the tables below. If the problem persists, please contact the customer service.

Check the laundry.
Door can’t be opened| Safety protection is activated.| Disconnect the power and restart.
Water leakage| Connections are not tight enough.| Check and fasten the water inlet pipe.
Check and clean the outlet hose.
Detergent residues in the detergent dispenser| Detergent is damp and/or clotted.| Clean and wipe the detergent dispenser dry.
Indicator or display does not work| PC board or harness have connection problems.| Switch off the power and check if the mains plug is connected properly.
Abnormal noise| Fixing bolts still in place.
Floor is not solid or level.| Check if the fixing bolts have been removed Make sure the appliance is installed on a solid and level floor.

Error Codes

high enough.
Straighten the water pipe.
Clean the inlet valve filter.
| Overtime water draining| Check the drain hose for blockage.
| Water overflow| Restart the appliance.
| Others| Restart the appliance.
If problem persists, please contact the customer service.

■ Customer service
Spare part for your appliance are available for a minimum of 10 years.
In case of questions please contact our customer service at:
Warning!
Risk of electric shock

• Never try repair an appliance which is defective of presumed to be defective.
  You may put your own and future users’ lives in danger.Only authorised specialists are allowed to carry out this repair work.

• Improper repair will void the warranty and subsequent damages can’t be recognized!

Transport
IMPORTANT STEPS WHEN MOVING THE APPLIANCE

• Unplug the appliance and close the water inlet tap.
• Check, if the door and the detergent dispenser are closed properly.
• Remove the water inlet pipe and the outlet hose from the house installations.
• Let the water drain completely from the appliance (see “Maintenance Cleaning the drain pump filter”)
• Important: Re-install the 4 transport bolts in the back of the appliance.
• This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door cannot be used as a handle.

■ Technical Specifications

Model| Washing Capacity (kg)| Dimension (WxDxH) (mm)| Net Weight (kg)| Rated Power (W)
---|---|---|---|---
GLX07014| 7.0kg| 595x495x850| 60kg| 2050W
GLX08014| 8.0kg| 595x565x850| 68kg| 2000W

Product fiche concerning to Regulation (EU) No 1061/2010

Energy efficiency class on a scale from A (most efficient) to G (least efficient)| E
Energy consumption 174 kWh per year, based on 220 standard washing cycles for the standard cotton programmes at 60°C and 40°C at full and partial load and the consumption of the low-power models. Actual energy consumption will depend on how the appliance is used.
Energy consumption of the standard 60°C cotton programme at full load| 0.91 kwh/cycle
Energy consumption of the standard 60°C cotton programme at partial load| 0.69 kwl/cycle
Energy consumption of the standard 40°C cotton programme at partial load| 0.61 kwh/cycle
Weighted power consumption of the off-mode| 0.5W
Weighted power consumption of the left-on mode| 1.0W
Water consumption 9900 liters per year, based on 220 standard wahshing cycles for the standard cotton programmes at 60°C and 40°C at full and partial load. Actual water consumption will depend on how the appliance is used.
Spin-drying efficiency class on a scale from A (most efficient) to G (least efficient)| B
Maximum spin speed| 1400 rpm
Remaining moisture content| 53%
Intensive 60°C programme and the Intensive 40°C programme are the standard washing programmes to which the information in the label and the fiche related, that these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient programmes in terms of combined energy and water consumption.
Programme time of the standard 60°C cotton programme at full load| 240 min
Programme time of the standard 60°C cotton programme at half load| 230 min
Programme time of the standard 40°C cotton programme at half load| 230 min
Duration time of left-on mode| 1min
Airbone acoustical noise emissions during washing phase| 62dB (A)
Airbone acoustical noise emissions during spinning phase| 79db (A)
Built-in washing machine| No

Energy test program: Intensive 60/40°C; Speed: the highest speed; Other as the default.
Model Identifier: GLX07014
General product parameters:

Energy consumption in kWh per cycle, based on the eco 40- 60 programme. Actual energy consumption will depend on how the appliance is used.| 0.783| Water consumption in litre per cycle, based on the eco 40-60 programme. Actual water consumption will depend on how the appliance is used and on the hardness of the water.| 45
Maximun temperature inside the treated textile (a) (°C)| Rated capacity| 39| Weighted remaining moisture content (b) (%)| 53.9
Half| 35
Quarter| 24
Spin speed (rpm) (a)| Rated capacity| 1400| Spin-drying efficiency class (a)| B
Half| 1400
Quarter| 1400
Programme duration (h:min)| Rated capacity| 3:28| Type| free-standing
Half| 2:42
Quarter| 2:42
Airborne acoustical noise emissions in the spinning phase (a) (dB(A) re 1 pW) “| 80| Airborne acoustical noise emission class (a) spinning phase| C
Off-mode (W)| 0.50| Standby mode (W)| 1.00
Delay start (W) (if applicable)| 4.00| Networked standby (W) (if applicable)| NA

Minimun duration of the guarantee offered by the supplier (b):

This product has been designed to release silver ions durting the washing cycle| NO
---|---

Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex II to Comission Regulation (EU) 2019/2023 (1) (b) is found:
(a) for the eco 40-60 programme
(b) changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369
(c) if the product database automatically generates the definitive content of this cell the supplier shall not enter these data.

Product fiche concerning to Regulation (EU) No 1061/2010

Energy efficiency class on a scale from A (most efficient) to G (least efficient)| E
Energy consumption 196 kWh per year, based on 220 standard washing cycles for the standard cotton programmes at 60°C and 40°C at full and partial load and the consumption of the low-power models. Actual energy consumption will depend on how the appliance is used.
Energy consumption of the standard 60°C cotton programme at full load| 0.90 kwh/cycle
Energy consumption of the standard 60°C cotton programme at partial load| 0.88 kwl/cycle
Energy consumption of the standard 40°C cotton programme at partial load| 0.79 kwh/cycle
Weighted power consumption of the off-mode| 0.5W
Weighted power consumption of the left-on mode| 1.0W
Water consumption 11000 liters per year, based on 220 standard wahshing cycles for the standard cotton programmes at 60°C and 40°C at full and partial load. Actual water consumption will depend on how the appliance is used.
Spin-drying efficiency class on a scale from A (most efficient) to G (least efficient)| B
Maximum spin speed| 1400 rpm
Remaining moisture content| 53%
Intensive 60°C programme and the Intensive 40°C programme are the standard washing programmes to which the information in the label and the fiche related, that these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient programmes in terms of combined energy and water consumption.
Programme time of the standard 60°C cotton programme at full load| 245 min
Programme time of the standard 60°C cotton programme at half load| 240 min
Programme time of the standard 40°C cotton programme at half load| 230 min
Duration time of left-on mode| 1min
Airbone acoustical noise emissions during washing phase| 62dB (A)
Airbone acoustical noise emissions during spinning phase| 79db (A)
Built-in washing machine| No

Energy test program: Intensive 60/40°C; Speed: the highest speed; Other as the default.
Model Identifier: GLX08014
General product parameters:

Energy consumption in kWh per cycle, based on the eco 40- 60 programme. Actual energy consumption will depend on how the appliance is used.| 0.826| Water consumption in litre per cycle, based on the eco 40-60 programme. Actual water consumption will depend on how the appliance is used and on the hardness of the water.| 48
Maximun temperature inside the treated textile (a) (°C)| Rated capacity| 38| Weighted remaining moisture content (b) (%)| 53.9
Half| 33
Quarter| 25
Spin speed (rpm) (a)| Rated capacity| 1400| Spin-drying efficiency class (a)| B
Half| 1400
Quarter| 1400
Programme duration (h:min)| Rated capacity| 3:38| Type| free-standing
Half| 2:48
Quarter| 2:48
Airborne acoustical noise emissions in the spinning phase (a) (dB(A) re 1 pW) “| 80| Airborne acoustical noise emission class (a) spinning phase| C
Off-mode (W)| 0.50| Standby mode (W)| 1.00
Delay start (W) (if applicable)| 4.00| Networked standby (W) (if applicable)| NA

Minimun duration of the guarantee offered by the supplier (b):

This product has been designed to release silver ions durting the washing cycle| NO
---|---

Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex II to Comission Regulation (EU) 2019/2023 (1) (b) is found:
(a) for the eco 40-60 programme
(b) changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369
(c) if the product database automatically generates the definitive content of this cell the supplier shall not enter these data.

1. The actual energy consumption will depend on how the appliance is used.
2. The actual water consumption will depend on how the appliance is used and on the hardness of the water.
3. Delivery of the spare parts within 15 working days after having received the order.

Product Data Sheet concerning (EU) 2019/2014
The product data sheet for your appliance can be found online.
Go to https://eprel.ec.europe.eu and enter the model identifier for your appliance to download the data sheet.
The model identifier for your appliance can be found in the technical specifications section.
Note!

• Programme setting for testing in accordance with applicable standard En60456 for wash.
• Programme setting for testing in accordance with applicable standard En50229 for wash and dry.
• When using the test programmes, wash the specified load using the maximum spin speed.
• The actual parameters will depend on how the applicance is used,and maybe different with the parameters in above mentioned table.
• The noise emissions during washing/spinning for the standard washing cycle at full load.

Remarks:

1. The energy efficiency class is from A(highest efficiency) to D (lowest efficiency)
2. Energy consumption per year, based on 220 standard washing cycles for standard programme at 60°C and 40°C at full and partial load, and the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
3. Water consumption per year based on 220 standard washing cycles for standard programme at 60°C and 40°C at full and partial load. Actual water consumption will depend on how the appliance is used.
4. Spin-drying efficiency class from G (least efficient) to A (most efficient).
5. The standard 60°C programme and the standard 40°C programme are the standard washing programmes. These programmes are Suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumptions for washing that type of cotton laundry. The actual water temperature may differ from the declared cycle emperature.
   Please choose the suitable type of detergent for the various washing temperatures to get the best washing performance with less water and energy consumption.

All the pictures in the manual are for explanatory purposes only. The actual shape of the unit you purchased may be slightly different, but the operations and functions are the same.
The company may not be held responsible for any misprinted information. The design and the specifications of the product for reasons, such as product improvement, are subject to change without any prior notice.
Please consult with the manufacturer at +30 211 300 3300 or with the Local Distributor for further details.

Scan here to download the latest version of this manual.
www.inventorairconditioner.com/media- library

Activate your Warranty

Follow the next quick steps to activate your warranty:
STEP 1
Visit our website via the link:
https://www.inventorairconditioner.com/warranty-inventor
or by scanning the QR code, as follows:

https://www.inventorairconditioner.com/warranty-inventor

STEP 2
Fill in the obligatory fields as requested in the “Owner’s details” and “Unit’s details”: STEP 3
Click SEND button at the end of the submission form: STEP 4
Wait for the confirmation email you will receive at the email address you have filled in – please also check your spam folder.
STEP 5
Inventor warranty is now valid!

V 1.0.072021
Manufacturer: INVENTOR A.G. S.A.
24th km National Road Athens – Lamia & 2 Thoukididou Str., Ag. Stefanos, 14565
Tel.: +30 211 300 3300, Fax: +30 211 300 3333 – www.inventor.ac

Documents / Resources

| inventor GLX07014 Washing Machine [pdf] User Manual
GLX07014 Washing Machine, GLX07014, Washing Machine, Machine
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>