ansult 002465 Light Chain Instruction Manual
- June 6, 2024
- ansult
Table of Contents
002465
LIGHT CHAIN
Operating instructions
(Translation of the original instructions)
Important! Read the user instructions carefully before use. Save them for
future reference.
Care for the environment!
Recycle discarded product in accordance with local regulations.
Jula reserves the right to make changes.
For latest version of operating instructions, see
www.jula.com
JULA AB, BOX 363, SE-532 24 SKARA
2021-11-10
©Jula AB
SAFETY INSTRUCTIONS
- Do not conned the product to the mains power supply while the product is still in the pack.
- Designed for indoor and outdoor use.
- Check that no light sources are damaged.
- Do not connect two or more string lights together.
- No part of the product can be replaced or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or abrasive objects during assembly.
- Do not expose the cord or conductors to mechanical loads. Do not hang objects on the string of lights.
- This is not a toy. Exercise care if the product is used near children.
- Unplug the transformer from the mains power supply when the product is not in use.
- This string of lights must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
- The product is not intended to be as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING!
The string of lights may only be used if all seals are fitted correctly.
Symbols
| Class III.
---|---
| Approved as per applicable directives.
| Recycle a discarded product in accordance with applicable regulations.
TECHNICAL DATA
Input voltage, transformer 230 V — 50 Hz
Output voltage, transformer 31 V AC
Output 3.6 W
No. of LEDs 80 pcs.
Protection rating IP44
USE
- Remove the string of lights from the packaging.
- Connect the set to the transformer.
- Plug the plug into the mains power supply.
- Press the power switch to turn on the light sources.
- Different lighting options can be activated by pressing the power switch the following number of times:
| Number of times pressed | Lighting option |
|---|---|
| Once | ON. White constant light without timer. |
| Twice | ON. White constant light with timer function (8 hours on, 5 hours off, |
4 hours on, 7 hours off).
Three times| ON. White flashing light with timer function (8 hours on, S hours
oft 4 hours on, 7 hours off).
Four times| ON. Multi-colored constant light without timer function.
Five times| ON. Multi-colored constant light with timer function(8 hours on, S
hours off, 4 hours on, 7 hours off).
Six times| ON. Multi-colored flashing light with timer function(8 hours on, 5
hours oft 4 hours on, 7 hours off).
Seven times| ON. Switches between white and multi-colored light with timer
function(8 hours on, S hours off, 4 hours on, 7 hours off).
Eight times| OFF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>