August MR410 USB-C Dual Bluetooth 5 Audio Adaptor User Manual

August MR410 USB-C Dual Bluetooth 5 Audio Adaptor

Thank you for purchasing the August MR41 0 USB-C Dual Bluetooth 5 Audio Adapter. This user manual is designed to familiarize you with all the features of this device. Please take the time to read this user manual carefully, even if you are already familiar with a similar product.

Safety
To ensure the safety of you and others, please read the Safety Instructions before using this device. Please do not disassemble the product, it can be unsafe and will invalidate the manufacturer’s warranty.

Disposal
Please ensure the product and accessories are disposed of in compliance with the WEEE (Waste Electrical and Electronic Equipment) Directive and any other regulations applicable to your country. Always check with the environment agency and any other relevant authorities for current disposal regulations.

Declaration of Conformity
The Declaration of Conformity can be found on our website at http://augustint.com/en/declaration/

Customer Service
You can contact us by phone on: +44 (0)845 250 0586 or by email at: service@augustint.com should you require further technical support or customer service.

Box Contents

Part names and functions

1.  Type-C Plug
2. Type-C Port (Passthrough)
3.  Bluetooth Button 1
4.  Bluetooth Button 2
5.  Bluetooth Status Indicator 1
6. Bluetooth Status Indicator 2
7. aptX LL Codec Indicator
8. aptX Codec Indicator
9. SBC Codec Indicator
10.  Power Indicator
11.  USB 3.0 adapter

Operation

Bluetooth Connection

1. Connect the MR410 to the source device. When connecting via a USB port, please use the USB 3.0 adapter provided.
2. Press button 3 or 4 on the MR410 lo activate paring mode.
3. Enable Bluetooth function and activate pairing mode on the receiver device to connect with MR410.
4.  The MR410 will pair with the device automatically.
5.  The LED 5 or 6 will turn blue once connected via Bluetooth. If this does not happen, please repeat steps 2 -4. Reset the MR410 Press and hold button 3 or 4 for 5 seconds to reset and clear all the Bluetooth connections.

Disconnection & Power off

1. Press button 3 or 4 to disconnect Bluetooth devices.
2. Unplug the MR410 from the source device to power off.

Reconnect

1. lf already paired, Bluetooth devices will automatically reconnect.
2.  Audio devices will disconnect from the MR410 when they are not within the Bluetooth working range. To reconnect, move the audio device closer to the MR410.
3. When the Bluetooth is accidentally disconnected, power off and reboot the receiver device. The MR41 0 will automatically reconnect.

Charging source device
Plug the charging cable in the passthrough USB-C port to charge your source device when using the MR410.

Troubleshooting

Specifications

Warranty

This product is guaranteed for twelve months from the date of the original purchase. In the unlikely event of any defect arising due to faulty materials or workmanship, the unit will be either replaced or repaired free of charge {where possible) during this period. An alternative product will be offered in case the product is no longer available or repairable. This warranty is subject to the following conditions:

• The warranty is only valid within the country where the product is purchased.
•  The product must be correctly installed and operated in accordance to the instructions given in this user manual.
•  The product must be used solely for domestic purposes.
•  The warranty only covers the main unit, and does not cover the accessories.
• The warranty does not cover the damage caused by misuse, negligence, accident and natural disaster.
• The warranty will be rendered invalid if the product is resold or has been damaged by inexpert repairs. The manufacturers disclaim any liability for incidental or consequential damages.
•  Please consult our customer adviser before returning any product; we are not responsible for any unexpected product returns.
• Any faulty product must be kept and returned in the original packaging with all the accessories and the original copy of the purchase receipt.

The warranty is in addition to, and does not diminish, your statutory or legal rights.
Customer Service: Telephone: +44 (0) 845 250 0586
Email: service@augustint.com This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The Declaration of conformity may be consulted online at http://www.augustint.com/en/declaration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>