alza WowME Round Watch Smart Watch User Manual

alza WowME Round Watch Smart Watch

The product user guide contains product features, how to use, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line. www.alza.co.uk/kontakt. +44 (0)203 514 4411 Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz.

Install the Wristband APP

Scan the following QR code or enter the app store on your phone to download and install “GloryFit”. Device requirements: iOS 9.0 or above; Android 4.4 and above; Bluetooth 4.0 and above. Important warning: Please follow the upcoming instructions, do not bind the device directly in the Bluetooth settings of your smartphone. Use the GloryFit app instead.

Device Pairing

When being used for the first time, it is necessary to connect the wristband with the app. After successful connection, the wristband will self-synchronize time, or otherwise, step calculation and sleep data won’t be accurate.

After the watch is successfully paired with your mobile phone, the watch will adjust the time automatically and will synchronize all your sports records and health status. Warning: After binding, the app can ask you to be given permissions on your phone (e.g. for notifications). Without approving them some function of your watch will not work properly.

Main Operations

Raise your wrist to light up the screen. The screen will turn off after five seconds. This function can be switched off in GloryFit app.

Display gestures:

• Slide down for the settings interface.
• Slide up for the message interface.
• Slide right for the main menu.
• Slide left for data interfaces.

Button functions:
Hold the button to turn on the device. On the main interface, you can hold the button to turn off the device.
When operating the watch – press the button to return to the previous interface.
During sports activity press the button to pause or resume the workout.

Charging Method
For the first time, please take the wristband out and charge the equipment with the corresponding charger. When charging, the wristband will open automatically. Charging method is as follows: Connect the USB-charging cable with the device at the back of the device. The charging voltage is 5V.

Wearing Method

For relevant measuring values, it is necessary to wear the watch properly. Adjust the size of the strap to secure the sensor is close to the skin. Ideal place is displayed on the picture.

Keep the test area clean. Sweat or stains may affect the test results.

Main Functional Interface

Main Interface
Switch the dial face by the long-pressing display on the home screen. There are three default watch faces available and others, including your own, can be selected in the GloryFit app.

Sports Interface
Switch to the sports interface, click the screen to enter the specific sports interface. For sport modes swipe right on the main interface to get into main menu and choose “Workout”. Then you can select your sport.

Data Interfaces
Slide left on the main interface to see data interfaces with the following data shown:

• Daily activity overview
• Heart rate
• Blood pressure
• Blood O2 saturation
• Sleep detection
• Weather forecast

For conducting testing, stay on the selecting interface and wait until the measurement is complete. Measured values including history are available in the GloryFit app.

Sleep detection function
When you fall asleep, device will automatically determine the sleep monitoring mode and monitor your deep sleep / shallow sleep and wakefulness time. Based on your movement and heart rate watch will calculate your sleep quality and sleep analysis will be available in GloryFit app.

Message Interface
Slide up on the home screen to enter the messages menu. You can go through your recent notifications and see details by clicking on them.

Settings Interface
Enter the settings interface by sliding down on the home screen. There are four options available:

Find My Phone
If the phone is connected to the watch, you can find it by activating this function. Please note that it works only when the phone is not in a quiet mode.

Brightness Adjustment
Select one of four levels of display brightness.

Device Information
Find information about your device name, Bluetooth address or firmware version by clicking on “Info”.

Other Settings
Under “Settings” you can restore or turn off your device.

APP Functions and Settings

Personal Information and Exercise Goals
After entering the app, set up the personal information first.

Me → Click on your avatar

• Gender, age, height and weight can be set up. This personal information can enhance the accuracy of the data-
• Customize personal everyday exercise goals. A reasonable exercise plan is helpful for promoting body quality.

Notification Function
For notification function, a notification switch shall be switched on in the app and in the settings of your phone. The mobile phone and the device must be connected.

For correct functioning, notifications must be switched on in the GloryFit app. You can set the following notifications in the GloryFit app:

Call Notification
When you have an incoming call on your connected smartphone, you can see the callers’ names of their phone numbers. You can hang up by long-pressing the on-screen button.

Message Notification
See incoming messages on your phone including the name of the sender.

App Notification
Set up notifications for selected apps in the GloryFit app.

Sedentary Reminder
Turn on notifications that help you move frequently throughout the day.

Alarm Clock
Set different alarms. The device will vibrate at a selected time. You can turn on up to three alarms.

Matters Needing Attention
Please avoid strong impact, extreme heat, and exposure to the wristband. Please do not disassemble, repair or transform the device on your own.

• This device is charged with 5V 500mA and it is strictly forbidden to use overvoltage load power.
• This device is to be used in an environment ranging from 0 °C to 45 °C. It is forbidden to throw it into the fire so as not to cause an explosion.
• Please wipe off the water with a soft cloth. The device is not to be charged when it is wet since the water can cause corrosion and water in the contact point can damage the device.
• Do not let the device touch chemical substances such as gasoline, clean solvent, propanol, alcohol or insect repellent.
• Please do not use this device in high pressure and high magnetic environment.
• If you have sensitive skin, you may feel discomfort when the wristband is tightened.
• Please dry the sweat drops on the wrist in time. If the strap has a long contact with soap, sweat, allergies or pollution ingredients, it may cause skin itching.
• If it is used often, it is recommended to clean the wristband every week. Wipe the wet cloth and remove oil or dust with mild soap. It is not appropriate to wear the device in a hot bath.

Common Problems

What shall I do if I have problems with connection or notifications? You should try resetting the connection of your device with the following instructions:

1. Unbind your device in the GloryFit app and for iOS devices cancel the connection in the Bluetooth settings as well.
2. Uninstall the GloryFit app from your phone.
3. Reset your watch in the device settings.
4. Install the GloryFit app again on your phone.
5. Bind your watch again in the GloryFit app.

Why don’t I receive notifications from some apps?
There can be two issues:

1. Notifications are not allowed for a specific app. Go to device settings in the GloryFit app on your phone and turn on notifications for a selected app or turn on notifications for “others”. On iOS devices, you might need to restart your phone to ensure proper function.
2. On an Android device, your phone can automatically close the GloryFit app when it is running in the background. When the GloryFit app is closed, it cannot communicate with your watch. Please change the settings of battery saving in your phone to allow the app to run on the background.

Why can’t I find the device?
Since the wristband is not found in the Bluetooth broadcast, make sure the wristband is in power and activated and is not connected to any other phones. Then, put the wristband close to the phone. If it is still not working, restart the mobile phone.

Why should the wristband be worn more tightly when measuring heart rate?
The wristband uses light reflection principle, penetrates the skin through the light source and collects the signal reflected to the sensor to calculate your heart rate. If you don’t wear it tightly, there will be ambient light reaching into the sensor, which will affect measurement accuracy.

Is the wristband waterproof?
The device supports IP67 certification standard. It means that you can immerse device for 30 minutes into one-meter depth. Practically, it means that this device shall withstand light rain or washing hands. Device with this certification is not waterproof in streams of water, against high pressure or high-temperature water.

Does the Bluetooth connection need to be opened all the time? Is there any data after disconnection?
Before the data is synchronized, the data is kept on the wristband host (seven days of data can be retained). When the Bluetooth connection of the wristband and the mobile phone is successful, the wristband data will be automatically uploaded to the mobile phone. Please synchronize data to the mobile phone on a regular basis.

Disclaimer

Warning:
This product is not a medical device. The watch and its app are not intended to be applied to diagnose, treat or prevent diseases or symptoms. To change your habit, such as exercise habit, be sure to consult qualified professional medical personnel to avoid causing casualties. We reserve the right to modify or improve any function described in this guide without prior notice. At the same time, we reserve the right to keep the contents of the product updated. All the contents are for a reference only. Please take practicality as a standard.

Warning
By using this product, you agree that the measurement is indicative, cannot be taken into account and does not in any way replace therapy! Therefore, do not evaluate the measured values yourself and do not determine the therapy yourself according to them. Follow your doctor’s instructions and trust his diagnosis. Take your medicine as instructed by your doctor and never change the dose. The measured values determined by you can only be used for your information – they do not replace a medical examination! Discuss your measured values with your doctor, definitely do not make any medical decisions based on them (for example, the use of drugs and their dosage)! The importer is not liable for the measured values. Do not use the watch in extreme temperatures (below -10 °C and above 40 °C). Reassembling or modifying the product impairs its safety. All modifications and repairs to the equipment or accessories must be carried out by a specialist workshop. Never open or repair the product yourself! Handle the product carefully. It can be damaged by blows or falling from a height. Technical specifications are subject to change without notice. Never heat the battery above 50 °C and do not dispose of in fire: risk of explosion / risk of ignition! Do not short-circuit the battery. Do not subject the battery to mechanical stress. Avoid dropping, bumping, bending, twisting or cutting the battery. If the battery overheats, stop charging immediately. A battery that overheats or deforms during charging is defective and should not be used. Never discharge the battery completely, as this will shorten its life. Store out of direct sunlight at room temperature. Keep the product out of the reach of small children – risk of suffocation by small parts. Do not place the device near heat sources. Connect to the correct power sources.

Specifications

simultaneously with the mobile app

Storage| Plug-in flash 128 Mb
 |
Supported Systems| Android 4.4/iOS 8.0 and above
Blood Pressure| Manual blood pressure detection
Detection of Sleep| Automatic detection based on the

amount of exercise and pulse rate

Notifications| Incoming calls, SMS and apps
Alarm Clock| Settings in the app
Photograph| Shake or click to take a picture
Flip Switch| Side settings in the app
Clear Data| Side settings in the app
System Switching| 12/24-hour system, distance metric

system (APP required)

Sedentary Reminder| Supported, requires the app
Stopwatch| Supported on the main device
Find My Phone| Supported on the main device

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized representative:

• Importer: Alza.cz a.s.
• Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
• IČO: 27082440

Subject of the declaration:

• Title: Smartwatch
• Model / Type: FWS4

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

• Directive No. (EU) 2014/53/EU
• Directive No. 2011/65/EU as amended 2015/863/EU
• Prague, 22.1.2021

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>