AMC iAC 120 DSP Power Amplifiers with DSP and Dante Cards Instruction Manual
- June 1, 2024
- AMC
Table of Contents
AMC iAC 120 DSP Power Amplifiers with DSP and Dante Cards
Installation Amplifiers
Single and two channel Class-D amplifiers for 100 V and low impedance systems. Electronically controlled amplifier circuit, easy menu navigation with rotary controller and LCD display. Silent fan mode, DSP processing: 6-point parametric EQ, limiter, gate, delay. Balanced Phoenix & Stereo RCA inputs and audio link outputs. RS-232 port for full control and status feedback allows integrating iAC amplifiers into large and complex audio systems that can be automated or controlled remotely. iAC 2×240 DSP features internal input-output routing and bridging. All models are available with optional Dante card for use with digital audio network systems.
Technical Specifications
Technical Specifications| iAC 120 DSP| iAC 240
DSP| iAC 360 DSP| iAC 2X240 DSP
---|---|---|---|---
Output power| 1 x 120 W| 1 x 240 W| 1 x 360 W| 2 x 240 or 1 x 480 W
Power consumption| 180 VA| 360 VA| 540 VA| 720 VA
Stand by power consumption| 10 VA| 10 VA| 10 VA| 20 VA
Power supply| ~ 230 V, 50 Hz
Outputs| 1 x Phoenix power output, 1 x Phoenix audio link
Inputs| 1 x Balanced Phoenix, 1 x Stereo RCA Optional: Dante digital audio 1 x
RJ-45
Frequency Response (100 V)| 120 Hz – 20 kHz
Frequency Response (4 ohm)| 32 Hz – 21 kHz| 31 Hz – 20 kHz| 31 Hz – 20 kHz| 35
Hz – 21 kHz
THD| 0,07 %| 0,20 %| 0,25 %| 0,16 %
S/N ratio| 95 dB| 92 dB| 98 dB| 94 dB
Input sensitivity| | | |
Input impedance| Balanced: 11 kΩ, unbalanced 8 kΩ
Remote control| RS-232
Tone control (over RS-232)| 6-band parametric EQ
Cooling| Passive cooling| Forced air cooling with manual / auto control
Dimensions (H x W x D)| 44 x 430 x 245| 88 x 430 x 342
Weight| 5 kg| 8 kg| 9.4 kg| 11.5 kg