NKCELL POWER Bronco 2021 Red Spare Tire Brake Light Compatible Installation Guide
- June 1, 2024
- NKCELL POWER
Table of Contents
NKCELL POWER Bronco 2021 Red Spare Tire Brake Light Compatible Installation Guide
NKCELL POWER
PLUG AND PLAY
LOSSLESS INSTALLATION
- Uasge:Spare Tire Wheel Brake Light
- Voltage:12v DC
- Color Of Light:Red
- LEDs:405PCS
- Waterproof:IP67
- Diameter:13.8 Inch(350mmx350mmx23mm)
RIASDY SPARE TIRE BRAKE LIGHT INSTALLATION STEP
STEP 1
Remove your spare tire using a applicable socket.
STEP 2
Remove the screws from the high brake light and open the plastic cover.
STEP 3
Unplug the factory 3rd brake light.
STEP 4
Set the spare tire brake light on the studs of the spare tire mount. Make sure that the wire is in the upper position to ensure you have enough length.
STEP 5
Plug the factory 3rd brake light in to the brake light ring harness, Plug the brake light ring into the factory harness.
STEP 6
Reinstall back the plastic shell of the high brake light and the spare tire.
The installation is complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>