IES-BATT-14.33 Lithium Ion Battery Owner’s Manual
- July 17, 2024
- IES
Table of Contents
Product Introduction
IES-BATT-14.33
IES-BATT-14.33 Lithium Ion Battery
More Usable Energy
- Deep cycle DOD control
Easy Installation
- Floor Stand or Wall Mounted
Flexible Investment
- Up to 15 units in parallel
Perfect Compatibility
- Compatible with Major PCS Brands
Safe & Reliable
- Premium Lithium Iron Phosphate(LFP) 8000 cycles
Quick Commissioning
- One Button ON/OFF
- Automatic ID Assignment
Product Specification
Performance
Cell technology| LFP (LiFePO4)
Battery usable energy [1]| 14.33 kWh
Nominal voltage| 51.2 V
Operating voltage| 44.8 – 56.16 V
Nominal output current| 140 A / 280 A
BMS protection current| 300 A, 1 S
Communication
Display| SOC status indicator, LED indicator
Communication| CAN / RS485 / RS232 / Wi-Fi (optional)
General Specification
Dimension (WDH)| 800×250×839 mm
31.5×9.8×33.0 inch
Weight| 145 kg (320 lbs)
Installation| Floor stand or Wall mounted
Operating temperature [2]| -20 to 60 °C (-4 to 140 °F)
Environmental humidity| ≤ 95%RH (No condensation)
Protection rating| IP 20
Cycle life [3]| 8000 Cycles or ten (10) years @ 80% DOD / 25°C / 0.5C, 70% EOL
Scalability| Max 15 batteries in parallel
Application| ON Grid / ON Grid + Backup / OFF grid
Compatible inverters| Refer to compatible inverter list (Compatible with major
PCS brands)
Standard Compliance
| Cell: UN38.3 / IEC62619 / UL 1642 / JET
| Battery pack: UN38.3 / IEC62619 / IEC61000 / UKCA (More available upon
request)
Ordering and Deliverable Part
Part| IES-BATT-14.33 Battery
IES-BATT-14.33 Parallel cable
IES-BATT-14.33 to PCS cable
Image
- Test conditions: 100% depth of discharge (DOD), 0.2C rate charge & discharge at 25°C.
- Charge/discharge derating occurs when the operating temperature from -10°C to 5°C & 45°C to 55°C.
- Please refer to the Warranty Letter for applicable conditions,the warranty is due whichever comes first.
www.ies.co.za
enquiries@ies.co.za