Kleenmaid LWT1210 Top Load Washing Machine Instruction Manual

Kleenmaid LWT1210 Top Load Washing Machine

Dear Customer

Thank you and congratulations for choosing Kleen maid. Your new appliance has been designed and meticulously tested to ensure that it meets all your culinary requirements, and has been carefully manufactured using top quality materials to give you years of reliable performance. For best results, carefully read the instructions on how your new appliance is to be installed. Correct installation will avoid delays and unnecessary service call costs. Once installation is complete, please read this instruction manual carefully and get to know the controls and the features of your new Kleenmaid appliance. These simple instructions will enable you to achieve excellent results from the very first time you use it. Again, congratulations and thank you for choosing The Best You Can Own.

KLEEN MAID

Safety instructions

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. The new hose-sets supplied with the appliance are to be used and old hose sets should not be reused. The openings must not be obstructed by a carpet. This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels, and other residential type environments; bed and breakfast type environments; areas for communal use in blocks of flats or in launderettes.

Electrical Safety Precautions

This appliance is for indoor use only. Do not install the washing machine in a humid place. Hands should not be inserted into the tub whilst it is spinning. If the tub does not stop spinning within 15 seconds of opening the lid during a spin cycle please stop using the machine and have it repaired. Before any maintenance is performed upon this washing machine, unplug the appliance from the mains electricity supply. Always unplug the machine and turn off the water supply after use. See the max/min. inlet water pressure in the Technical Specifications table on page 21. To ensure your safety, the power plug must be inserted into an earthed three-pole socket. Check carefully and make sure that your socket is properly and reliably earthed. The water and electrical devices must be connected by a qualified technician in accordance with the manufacturer’s instructions and local safety regulations.

Child Safety Precautions

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children shall, not play with the appliance. Cleaning and uşer maintenance shall not be made by children without supervision. Check the machine before every operation to ensure animals or children have not climbed inside the tub. Young children should be supervised to ensure that they do not play with the appliance. The machine may become very hot during operation. Keep children and pets far away from the machine whilst in operation. Avoid using this appliance in very wet rooms as well as in rooms with explosive or caustic gas. Remove all packaging before using the appliance, otherwise, Serious damage may result. The washing machine has double inlet valves and should be correctly connected to the hot water and cold water supply. The plug must be accessible after installation.

Avoiding the risk of explosion

Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) This may result in fire or explosion. Thoroughly rinse such items of washing by hand.

Installation Safety Precautions

This washing machine is for indoor use only. It isn’t intended to be built-in. The openings must not be obstructed by a carpet. A washing machine shall not be installed in bathrooms or very wet rooms or in rooms with explosive or caustic gases. Remove all packaging and transport bolts before using the appliance, otherwise, serious damage may result. The washing machine has double inlet valves and should be correctly connected to the hot and cold water supply. The plug must be accessible after installation. WARNING TMUBT BE ENSURED THAT THES ALLIANCE S PPi Y WHCHCOMTNBIVOOMB FRWTHTHE BEIEvT AUSTRALIAN STANDARD FAILURE TO DO S0 MAY SERIOusLY DAMAE THE APRLMNCE ANO ANY BUCH OAAGE NOT CURED E MNLACTLRERE WARRANTY To avoid damaging the appliance Your product is only for home use and is only designed for textiles suitable for machine washing. Do not climb up and sit on the top cover of the machine. Do not lean against the machine lid. Cautions during Handling Machine

1. Transport bolts shall be reinstalled to the machine by a qualified person.
2. The accumulated water shall be drained out of the machine.
3.  Handle the machine carefully. Never hold any protruding part on the machine while lifting. The machine lid can not be used as the handle during conveyance
4. This appliance is heavy. Transport with care.

Product description

Accessories

Packing the washing machine

• Remove the cardboard box and styrofoam packing.
• Lift the washing machine and remove the base packing.
• Remove the tape securing the power supply cord and drain hose.
• Remove the inlet hose from the drum.

Before installing the machine, check the selected location has

• Rigid, dry, and level surface
• Avoid direct sunlight
• Sufficient ventilation
• Room temperature is above 0 C
• Keep far away from heat sources such as coal or gas.

Installation of the drain hose

•  Connect the end of the supplied drain hose to the drain outlet on the lower back of the washing machine.
• Fix and tighten it firmly with the supplied hose clamp. See figure on right.

Positioning of drain hose

See the diagrams below for minimum and maximum heights for positioning the drain hose. Ensure the drain hose is not kinked, crushed or stretched.

• Check if the feet are closely attached to the cabinet. If not, turn them to their original position by tightening the nuts.
• Check alignment of the product with a spirit level and adjust if required.
• Loosen the lock nut and turn each foot until it closely contacts with the floor. 4.After locking the feet properly press on all four corners to ensure the feet have been adjusted correctly.
• Connection between screw tap and inlet hose.
• Screw inlet hose onto a tap with threads and tighten firmly. Check for water leakage after connection

Preparation before washing

Washing

After washing

Buzzer will beep after the washing cycle is finished and the power supply will cut off automatically. The laundry may then be unloaded.

Preparing the machine and clothes

• The working condition of the washer should be(0-40)℃. If used under 0℃ the inlet valve and draining system may be damaged. If the machine is placed under conditions of 0℃ or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use.
• Please check the clothing care labels and the directions for detergent use before washing. Use non-foaming or low-foaming detergent suitable for top load washing machines.

Using Detergent and Washing Powder

• Dilute washing powder or powdered additives with a little water before adding to the detergent dispenser to prevent the inlet of the dispenser from becoming blocked and overflowing while the machine is filling with water.
• Please choose a detergent suitable for top load machines, and for the selected washing temperature, to optimize washing performance with less water and energy consumption.

Control Panel

OPERATION

Options

Child Lock

If you want to lock all the buttons to prevent settings from being changed by children you can activate the Child Lock function. NB. Power button is still active when child lock is on.

How to Lock

• Press the Power button to turn the power on.
• Press the Start/Pause button to start washing.
  Press and hold the Rinse and the Spin buttons simultaneously until there is a beep and the child lock icon on the display lights up. NB. Power button is still active when child lock is on.

How to Unlock

If you want to turn off the child lock during the wash cycle press the Rinse and Spin buttons simultaneously again until the machine beeps and the childlock display light goes off.

Speed Clean System

• Press the Power button to turn power on.
• Turn the Program Knob to select “Normal”, Jeans”, “Mix”,
• “Whites”or “Colours” program.
•  Press the Speed Clean button.
• Press the Start/Pause button, the Speed Clean function starts up.

Washing programs table

MAINTENANCE

Cleaning the cabinet

Proper maintenance of the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a cloth to wipe it off immediately. Sharp items should not be used when cleaning the machine.

Cleaning the inlet filter

• Screw off the inlet pipe from the back of the machine..
• Pull out the filter with long nose pliers and use a brush to clean the filter.
• Reinstall the filter after cleaning.
• Reconnect the inlet pipe.

Cleaning the lint filter

• There is a built-in lint filter on the inner wall of the tub. It helps to collect lint during the washing cycle.
• It is recommended that the the lint filter is cleaned after every 10 cycles.
• Press the latch to release the cover and remove the filter. Clean the filter with water then replace it into the washer.

Troubleshooting

Technical Information

Energy efficiency test program

This is identified as follows for LWT1210: Normal washing program where Water level is Max level, and wash Temperature is warm.

KLEENMAID WARRANTY

TERMS AND CONDITIONS

• Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid will provide parts and labour to you the customer as set out herein.

• Kleenmaid’s Products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.

• You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
  not amount to a major failure.

• The benefits given to you under this Kleenmaid Warranty are in addition to other rights and remedies to which you may be entitled under the Australian Consumer Law in relation to the Product to which this Kleenmaid Warranty relates. Subject to the conditions below, the Product is warranted by Kleenmaid and/or its agents to be free from defects in materials and workmanship for the

• Warranty Period for normal Domestic Use.

• Product Identification: –

• Kleenmaid reserves the right to reject claims for any services or work where you cannot produce for verification the serial number and a proof of purchase for the Product (including but not limited to the original invoice).

• this Kleenmaid Warranty will be voided if the serial number for the Product cannot be verified. This is not intended to exclude, restrict or modify any right or remedy to which you may otherwise be entitled under the consumer guarantee provisions of the Australian Consumer Law.

•  in the event that a request for repair is made against this Kleenmaid Warranty where the serial number for the Product cannot be verified or you cannot produce for verification a proof of purchase for the Product (including but not limited to the original invoice), the repairer will not carry out any repairs on the Product and you will be charged a service call-out fee.

• What is covered by this Kleenmaid Warranty: –

• the Product is covered for faulty workmanship or parts that have failed under normal Domestic Use.

• Kleenmaid and/or its agents will determine by objective testing if there are any defects in the Product and/or faulty workmanship.

• this Kleenmaid Warranty is only applicable if repairs on Products are carried out within Mainland Australia.

• This Kleenmaid Warranty: –

• covers a Product purchased as new, manufactured for use in Mainland Australia;

•  commences from the date of delivery of the Product;

•  provides for the labour and replacement parts necessary to maintain the Product in good operating condition as

• specified in this Kleenmaid Warranty, however, if repair is needed because of Product failure during normal Domestic

• Use, Kleenmaid has the option to repair or replace the defective Product or part of the Product with a product or part of like kind and quality. A replacement part may be new or reconditioned of like kind and quality and may cost less than the original Product purchased and no charges or refunds will be made based on the replacement product or part cost difference; and

•  is only applicable when the Product is used and operated in accordance with the Manufacturer’s instructions.
  What is not Covered by this Kleenmaid Warranty (excluded):-

• any damage or failure to or of the Product or part of the Product:

• due to the Product being inadequately serviced to manufacturer’s recommendations;

• resulting from environmental conditions including and not limited to dirt, dust, rodents, insects, rust, corrosion, salt built-up, of or in any part of the Product;

• resulting from excessive use but fair wear and tear is excepted;

• resulting from poor installation including and not limited to positioning and externally fitted equipment such as

• plumbing and drainage, cabling, antennae or due to incompatibility of connected equipment;

• caused by overheating as a result of sitting or positioning of the Product, where there is no provision for adequate ventilation or adequate protection from excessive dust;

•  if the Product has been dismantled, repaired or serviced by any person other than someone authorised by Kleenmaid or its agents or representatives;

•  caused by power surges or spikes, including and not limited to, mains power and telecommunications connections, or to other unspecified sources, incorrect power current, voltage fluctuation, amperage fluctuation, rust or corrosion;

• if the Product is dropped, collision of the Product with another object, use for which the Product is not designed, damage to the Product caused by your own negligence, accidental or deliberate misuse of the Product by you, theft, abuse, vandalism, flood, fire, earthquake, electrical storms or any other act of God or any war related events; or

• due to the introduction of abnormal heat loads to the Product;

• costs of attendance and testing where no fault or defect covered by the terms of this Kleenmaid Warranty is identified in the Product;

•  initial setup and installation of the Product;

• normal maintenance costs and costs incurred through the installation of items listed as requiring periodic replacement;

• Products with removed or altered serial numbers;

• broken or cracked glass other than transport damage to the initial point of delivery;

• consumables such as but not limited to bulbs/globes, seals, filters, batteries and remote controls;

• removal and reinstallation of an internal component not performed by an authorised Kleenmaid agent or representative or authorised service centre;

• cosmetic or structural items; or

• any failures due to interference from or with other products and/or sources.

• This Kleenmaid Warranty ceases if: –

• the Product ceases to carry the original manufacturer’s serial number or is sold at an auction;

• the Product is rented; or

• there is failure to pay monies owing on invoices as a result of non-warranty work being carried out at the request of the end-user as per point 16 below.

• Neither Kleenmaid nor its representatives provide loan equipment under the terms of this Kleenmaid Warranty.

•  Any unauthorised access to the internal hardware of the Product will void this Kleenmaid Warranty.

• Repair Notice: Products presented for repair may be replaced by refurbished Products of the same type rather than being repaired. Refurbished parts may be used to repair the Products.
  Replacement items are “like for like” and is not “new for old” and does not indicate in any way that a faulty Product will be replaced with a new part or unit. “Like for like” may either be a quality checked, refurbished or reconditioned unit of the same or later batch of model/size/specifications

• The cost of making a claim under this Kleenmaid Warranty is not covered by Kleenmaid, including any costs of transportation or travel expenses between your home and your nearest authorised service agent.

• Kleenmaid accepts no liability for items that are lost, damaged, or stolen as a result of freight, transport or storage. If you are
  required to transport the Product to an authorised service centre, you must ensure that it is securely packed and insured.

• On Public Holidays or other periods when regular business and wholesale operations are temporarily ceased, repairer availability and warranty response times may extend beyond the standard response times due to the unavailability of repairers and parts.

•  For any repair performed on a Product under this Kleenmaid Warranty where no fault can be found, or the item is deemed by Kleenmaid or an authorised agent, to be not faulty under this Kleenmaid Warranty, or the repair or fault is not covered under this Kleenmaid Warranty, a ‘No Fault Found’ fee is payable by you. Kleenmaid will advise you of this cost and seek your agreement to pay such costs before commencing such repairs.

• Any repairs or services required that are outside the terms and conditions of this Kleenmaid Warranty can be carried out at your request at your cost (including where the Product has not been installed or set up correctly). Kleenmaid will always advise you of this cost and seek your agreement to pay such costs before commencing such repairs. A credit card may be required prior to the commencement of such services.

• Extra charges will be payable by the customer should the Product not be readily accessible without special equipment, such as but not limited to cranes and lifts or should the Product be installed in a position that service access is blocked and/or repair work is not possible without uninstalling the Product to gain access.

• You, the customer, may be entitled to purchase an extended warranty in respect of the Product. Any extended warranty will not be issued by Kleenmaid but by a third party. Any extended warranty services will be provided directly by the third party as principal and not as agent for Kleenmaid, under their extended warranty terms and conditions and not under this Kleenmaid
  Warranty.

• To make a claim under this Kleenmaid Warranty, please have your proof of purchase and the serial number of the Product ready and call (02) 9310 1207 during business hours.

• This Kleenmaid Warranty is given by:

• Name: Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid

• Business address: Level 2, Suite 3, 204 Botany Rd, Alexandria NSW Australia 2015

• Telephone: (02) 9310 1207

•  Definitions:

• Australian Consumer Law means the Competition and Consumer Act 2010 (Cth).

• Domestic Use means use of the Product for personal, domestic or household purposes.

•  Kleenmaid means Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid.

• Mainland Australia means the following States and Territories of Australia: New South Wales, Victoria, South Australia,

• Western Australia, Queensland, Tasmania, Northern Territory, Australian Capital Territory.

• Product means the appliance sold by Kleenmaid to you as evidenced by the original purchase invoice.

• Warranty Period means the period of 60 months for domestic use, 12 months for non-domestic use, or such alternative period as may be specified.

References

• Kleenmaid Warranty Assistance

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>