Kleenmaid OFS9021 Freestanding Oven Instruction Manual
- May 15, 2024
- kleenmaid
Table of Contents
Kleenmaid OFS9021 Freestanding Oven
Specifications
- Model No.: OFS9021
- Telescopic legs:
- Height: min 101mm – max 144mm
- Diameter: 51mm
- Setback (Distance between front of oven and front of leg): 72mm
- Total depth of unit when door is open: 1012mm
- Appliance requires a 15A circuit and GPO
- Supplied with a 15A plug and cord
Product Usage Instructions
Installation:
Proper installation is crucial to avoid delays and unnecessary service call costs. Ensure the appliance is correctly installed as per the instructions provided.
Getting Started:
- Read the instruction manual carefully after installation.
- Familiarize yourself with the controls and features of the
oven.
Manual Cooking:
To operate the oven manually, press the appropriate buttons simultaneously. Select the desired temperature and adjust the cooking time using the control buttons.
Digital Timer:
The electronic programmer includes a 24-hour clock with an illuminated display, a timer function (up to 23 hours and 59 minutes), and cooking duration settings. Follow the instructions provided to set and operate the timer.
FAQs
- What should I do if any part of the appliance is damaged?
- If any part of the appliance is cracked, broken, or damaged, discontinue use immediately, disconnect the power supply, and have a qualified technician inspect it before further usage.
- How can I prevent fluctuations in the time-of-day clock?
- Fluctuations in the time-of-day clock may occur due to power supply variations. While this may be annoying, it does not affect the appliance’s other functions. There is no way to prevent these fluctuations.
“`
To register your warranty or make a warranty claim, scan this QR code:
cooking collection
Instructions for use and warranty details
Freestanding Oven
Model No.: OFS9021
Dear Customer,
Thank you for joining our 40th anniversary celebration by choosing Kleenmaid.
Your new appliance has been designed and meticulously tested to ensure that it
meets all your culinary requirements, and has been carefully manufactured
using top quality materials to give you years of reliable performance.
For best results, carefully read the instructions on how your new appliance is
to be installed. Correct installation will avoid delays and unnecessary
service call costs.
Once installation is complete, please read this instruction manual carefully
and get to know the controls and the features of your new Kleenmaid appliance.
These simple instructions will enable you to achieve excellent results from
the very first time you use it.
Again, congratulations and thank you for choosing The Best You Can Own.
KLEENMAID
Page 2
Page 3
NOTE: If any part of this appliance is cracked, broken or otherwise damaged, usage should immediately be discontinued, the mains power supply disconnected, and a suitably qualified technician should inspect the appliance to determine its safety or otherwise prior to any further usage.
New Zealand) Local g
ner, must have either B (height of heat protective splash back) of not less
than 150mm above the periphery of the nearest burner for full dimension (width
or depth) of the cooking surface area, OR
ance of 650mm (or other minimum distanc
Telescopic legs; Height : min 101mm – max 144mm Diameter : 51mm Setback
(Distance between front of oven and front of leg) : 72mm.
Total depth of unit when door is open : 1012mm.
Note : All dimensions in mm. Dimension tolerance : ± 2mm.
Adaptor with test point fitted OR
Burner : Small Gas Consumption (MJ/h) Injector Size (mm)
Natural Gas (1.0kPa) 4.00 0.91
Universal LPG (2.75kPa) 4.00 0.56
Burner : Medium
Gas Consumption (MJ/h)
6.70
6.70
Injector Size (mm)
1.18
0.71
Burner : Large Gas Consumption (MJ/h) Injector Size (mm)
11.50 1.59
11.50 0.91
Burner : Wok Gas Consumption (MJ/h) Injector Size (mm)
12.50 1.62
13.00 0.98
Note: This appliance requires a 15A circuit and GPO, and is supplied with a 15A plug and cord.
Burners Ø pans in cm
Wok 22-24
Large 20-22
Medium 16-18
Auxiliary 10-14
Digital Timer
The electronic programmer is a device which groups together the following
functions : -24 hour clock with illuminated display -Timer (up to 23 hours and
59 minutes) -Cooking duration setting
Cooking duration programmed Timer in operation
e applied on the
buttons.
NOTE: Occasionally the time-of-day clock in this appliance may lose or gain time. This is due to
fluctuations in the mains power supply. Although annoying, is not something you can prevent nor will it
affect the other functions of the appliance.
Manual cooking without using the programmer
To operate the oven manually, press
and buttons at the same time.
Cooking Duration Setting First select desired temperature and oven function, press the button, then adjust the cooking time by [+] and [-] buttons. . The oven will turn on immediately. and the symbols will flash. At the end of set duration, the oven will turn off, a buzzer will ring.
The remaining cooking duration may be seen at any moment by pressing the
button.
The cooking program may be cancelled at any moment by pressing the [+] [-]
buttons until zero appears on the panel. The oven can then be used manually.
Convection Hot Air Frying To use Convection Hot Air Frying select the
Convection Baking: Fan Forced function. Place the wire rack into shelf
position 3 of the oven (see image.) Insert an oven tray below the wire rack to
collect any spills. Adding a small amount of cold water to the tray, before
pre-heating the oven, will make the tray easier to clean after cooking is
complete. Ensure there is separation between the wire rack and the oven tray
to maximize air circulation. Do not put the oven tray on the floor of the
oven.
Place the food in an open wire air frying basket and position the basket in
the center of the wire rack. Follow the directions for Fan Forced cooking on
the food packet. Preheat the oven to the recommended temperature prior to
putting the food in the oven. Failure to do so will mean the food will not be
sufficiently cooked. Do not use the packet directions for use with an Air
Fryer.
Tim
Oven Cooking and Cooking Times
For t
e again.
Nature of food General
Long-cooking roast Fowl (duck) Poultry Game Fish Pastries
Shelf Level 2 2 1 2 1 1 1
Oven Temp. °C 220–250 225–250 210–250 225–250 200–225 180–200 160–200
Time Minutes Relative to Qty
50–60 150–180 50–60 Relative to Qty 20–25 60–70
Food
Qty
Kg
Veal cutlet
1
Lamb cutlet
1
Liver
1
Chopped meat
1
roulades
Veal heart
1
Roast in the net
1
Half-chicken
1
Fish filet
1
Stuffed tomatoes
1
Shelf Level
Temp. °C
3
250
3
250
3
250
3
250
3
250
3
250
3
250
3
250
3
250
Pre-heat time in minutes
5 5 5 5
5 5 5 5 5
Time in min.
8–10 12–15 10–12 12–15
12–15 20–25 20–25 12–15 10–12
FAULT
POSSIBLE CAUSE
No spark when gas control knob is pressed.
No power.
Loose spark cable. Burner not aligned properly.
SOLUTION Check if cord is plugged in and switched on. Check mains circuit breaker. Call authorised representative. Remove and re-fit burner.
Burner not lighting when spark ignition working.
Gas supply off. Burner not aligned properly. Burner ports blocked.
Check gas supply valve. Remove and re-fit burner. Remove, clean and replace burner.
Burner goes out when Flame safeguard not activated.
Re-light, allow more time for flame safeguard to activate.
control knob released.
Flame safeguard faulty connection or broken.
Call authorised representative.
FAULT Uneven flame pattern or slight flame lifting. At minimum flame setting
the flame is too high.
Small flame on High setting.
POSSIBLE CAUSE Burner ports blocked.
Turndown control setting incorrect. Regulator faulty. Gas supply pressure low.
Incorrect injector fitted. Blocked injector or gas s upply tube.
Incorrect ute nsil size.
Flame too high on High setting.
Regulator faulty. Incorrect injector fitted.
Incorrect ute nsil size.
SOLUT ION Remove, clean and replace burner.
Call authorised representative.
Call authorised representative. Call authorised representative. Call
authorised representative.
Call authorised representative.
Refer to operating instructions ch oi ce . Call authorised representative. Call authorised representative. Refer to operating instructions ch oi ce .
utensil utensil
Total Power Standby Power Consumption Power Cord
:2650W
:1.2W :H05RR-F3G1.5mm², 15A, 250V
TERMS AND CONDITIONS
1. Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid
will provide parts and labour to you the customer as set out herein.
2. Kleenmaid may engage a Service Agent to provide service under this
warranty. 3. Kleenmaid’s Products come with guarantees that cannot be excluded
under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. 4. The benefits
given to you under this Kleenmaid Warranty are in addition to other rights and
remedies to which you may be entitled under the Australian Consumer Law in
relation to the Product to which this Kleenmaid Warranty relates. Subject to
the conditions below, the Product is warranted by Kleenmaid and/or its agents
to be free from defects in materials and workmanship for the Warranty Period
for normal Domestic Use. 5. Product Identification: –
a. Kleenmaid reserves the right to reject claims for any services or work
where you cannot produce for verification the serial number and a proof of
purchase for the Product (including but not limited to the original invoice).
b. this Kleenmaid Warranty will be voided if the serial number for the Product
cannot be verified. This is not intended to exclude, restrict or modify any
right or remedy to which you may otherwise be entitled under the consumer
guarantee provisions of the Australian Consumer Law.
c. in the event that a request for repair is made against this Kleenmaid
Warranty where the serial number for the Product cannot be verified or you
cannot produce for verification a proof of purchase for the Product (including
but not limited to the original invoice), the repairer will not carry out any
repairs on the Product and you will be charged a service call-out fee.
6. What is covered by this Kleenmaid Warranty: a. the Product is covered for
faulty workmanship or parts that have failed under normal Domestic Use. b.
Kleenmaid and/or its agents will determine by objective testing if there are
any defects in the Product and/or faulty workmanship. c. this Kleenmaid
Warranty is only applicable if repairs on Products are carried out within
Mainland Australia. d. this Kleenmaid Warranty: i. covers a Product purchased
as new, manufactured for use in Mainland Australia; ii. commences from the
date of delivery of the Product; iii. provides for the labour and replacement
parts necessary to maintain the Product in good operating condition as
specified in this Kleenmaid Warranty, however, if repair is needed because of
Product failure during normal Domestic Use, Kleenmaid has the option to repair
or replace the defective Product or part of the Product with a product or part
of like kind and quality. A replacement part may be new or reconditioned of
like kind and quality and may cost less than the original Product purchased
and no charges or refunds will be made based on the replacement product or
part cost difference; and iv. is only applicable when the Product is used and
operated in accordance with the Manufacturer’s instructions.
7. What is not Covered by this Kleenmaid Warranty (excluded):a. any damage or
failure to or of the Product or part of the Product: i. due to the Product
being inadequately serviced to manufacturer’s recommendations; ii. resulting
from environmental conditions including and not limited to dirt, dust,
rodents, insects, rust, corrosion, salt built-up, of or in any part of the
Product; iii. resulting from excessive use but fair wear and tear is excepted;
iv. resulting from installation by an unqualified or uncertified tradesperson;
v. resulting from poor or incorrect installation including and not limited to
positioning and externally fitted equipment such as plumbing and drainage,
cabling, antennae or due to incompatibility of connected equipment; vi. caused
by overheating as a result of sitting or positioning of the Product, where
there is no provision for adequate ventilation or adequate protection from
excessive dust; vii. if the Product has been dismantled, repaired or serviced
by any person other than someone authorised by Kleenmaid or its agents or
representatives; viii.caused by power surges or spikes, including and not
limited to, mains power and telecommunications connections, or to other
unspecified sources, incorrect power current, voltage fluctuation, amperage
fluctuation, rust or corrosion; ix. if the Product is dropped, collision of
the Product with another object, use for which the Product is not designed,
damage to the Product caused by your own negligence, accidental or deliberate
misuse of the Product by you, theft, abuse, vandalism, flood, fire,
earthquake, electrical storms or any other act of God or any war related
events; or x. due to the introduction of abnormal heat loads to the Product;
b. costs of attendance and testing where no fault or defect covered by the
terms of this Kleenmaid Warranty is identified in the Product; c. initial
setup and installation of the Product; d. normal maintenance costs and costs
incurred through the installation of items listed as requiring periodic
replacement; e. Products with removed or altered serial numbers; f. broken or
cracked glass other than transport damage to the initial point of delivery; g.
consumables such as but not limited to bulbs/globes, seals, filters, batteries
and remote controls; h. removal and reinstallation of an internal component
not performed by an authorised Kleenmaid agent or representative or authorised
service centre; i. cosmetic or structural items; or j. any failures due to
interference from or with other products and/or sources.
8. This Kleenmaid Warranty ceases if: a. the Product ceases to carry the
original manufacturer’s serial number or is sold at an auction; b. the Product
is rented; or c. there is failure to pay monies owing on invoices as a result
of non-warranty work being carried out at the request of the end user as per
point 16 below.
9. Service under this warranty may be limited by the area in which you live.
Service to remote and regional areas may incur additional travel costs which
will be payable by you. You will be advised of this at the time you make a
claim and Kleenmaid arranges to attend your premises.
10. Neither Kleenmaid nor its representatives provide loan equipment under
the terms of this Kleenmaid Warranty. 11. Any unauthorised access to the
internal hardware of the Product will void this Kleenmaid Warranty. 12. Repair
Notice: Products presented for repair may be replaced by refurbished Products
of the same type rather than being
repaired. Refurbished parts may be used to repair the Products. 13.
Replacement items are “like for like” and is not “new for old” and does not
indicate in any way that a faulty Product will be
replaced with a new part or unit. “Like for like” may either be a quality
checked, refurbished or reconditioned unit of the same or later batch of
model/size/specifications 14. The cost of making a claim under this Kleenmaid
Warranty is not covered by Kleenmaid, including any costs of transportation or
travel expenses between your home and your nearest authorised service agent.
15. Kleenmaid accepts no liability for items that are lost, damaged, or stolen
as a result of freight, transport or storage. If you are required to transport
the Product to an authorised service centre, you must ensure that it is
securely packed and insured. 16. On Public Holidays or other periods when
regular business and wholesale operations are temporarily ceased, repairer
availability and warranty response times may extend beyond the standard
response times due to the unavailability of repairers and parts. 17. For any
repair performed on a Product under this Kleenmaid Warranty where no fault can
be found, or the item is deemed by Kleenmaid or an authorised agent, to be not
faulty under this Kleenmaid Warranty, or the repair or fault is not covered
under this Kleenmaid Warranty, a `No Fault Found’ fee is payable by you.
Kleenmaid will advise you of this cost and seek your agreement to pay such
costs before commencing such repairs. 18. Any repairs or services required
that are outside the terms and conditions of this Kleenmaid Warranty can be
carried out at your request at your cost (including where the Product has not
been installed or set up correctly). Kleenmaid will always advise you of this
cost and seek your agreement to pay such costs before commencing such repairs.
A credit card may be required prior to the commencement of such services. 19.
Extra charges will be payable by the customer should the Product not be
readily accessible without special equipment, such as but not limited to
cranes and lifts or should the Product be installed in a position that service
access is blocked and/or repair work is not possible without uninstalling the
Product to gain access. 20. You, the customer, may be entitled to purchase an
extended warranty in respect of the Product. Any extended warranty will not be
issued by Kleenmaid but by a third party. Any extended warranty services will
be provided directly by the third party as principal and not as agent for
Kleenmaid, under their extended warranty terms and conditions and not under
this Kleenmaid Warranty. 21. To make a claim under this Kleenmaid Warranty,
please have your proof of purchase and the serial number of the Product ready
and call (02) 9310 1207 during business hours. 22. This Kleenmaid Warranty is
given by:
Name: Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid
Business address: Level 2, Suite 3, 204 Botany Rd, Alexandria NSW Australia
2015 Telephone: (02) 9310 1207 23. Definitions: a. Australian Consumer Law
means the Competition and Consumer Act 2010 (Cth). b. Domestic Use means use
of the Product for personal, domestic or household purposes. c. Kleenmaid
means Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as
Kleenmaid. d. Mainland Australia means the following States and Territories of
Australia: New South Wales, Victoria, South
Australia, Western Australia, Queensland, Tasmania, Northern Territory,
Australian Capital Territory. e. Product means the appliance sold by Kleenmaid
to you as evidenced by the original purchase invoice. f. Service Agent means
any independent service agent engaged by Kleenmaid to carry out any repair or
service under
this warranty. g. Warranty Period means for domestic use and for Products
purchased on or after 1 January 2019 the period of 60
months, otherwise 36 months. For non-domestic use 12 months or such
alternative period as may be specified.
UPDATE NOTICE: This Kleenmaid Warranty is current as at 1 December 2022 but is
subject to variation from time to time. For the latest version of the
Kleenmaid Warranty, please see our website https://kleenmaid.com.au/warranty/
or phone us on (02) 9310 1207.
OFS9021 V8.1