ansult 014780 Floor Fan Instruction Manual

June 6, 2024
ansult

ansult 014780 Floor Fan

OPERATING INSTRUCTIONS

A Important! Read the user instructions carefully before use. Save them for future reference.(Translation of the original instructions)

SAFETY INSTRUCTIONS

  • This product can be used by children from eight years and upwards and by persons with physical, sensorial or mental disabilities, or persons who lack experience or knowledge, if they are supervised or receive instructions concerning the safe use of the product and understand the risks involved with its use. Do not allow children to play with the product.
  • The product must only be used for its intended purpose and in accordance with these instructions.
  • Do not cover the product, this can result in overheating or fire.
  • Place the product standing upright on a level, stable surface.
  • When using the product it must always stand upright -it must never be used on its side.
  •  Pull out the plug from the power point when the product is not in use. Do not pull the power cord to pull out the plug.
  •  Leave a free space of a least 30 cm round the product to ensure safe and correct functionality.
  •  Check that the product can oscillate without colliding with or being obstructed by anything in the near vicinity.
  •  Never poke any objects into the grille in the product. It is especially important to explain this to children to make sure they understand the risks.
  • Do not use the product if the power cord or plug are damaged, if the product has tipped over, or if it is not working properly.
  • A damaged cord or plug must be replaced by an authorised service centre or qualified person to ensure safe use.
  • Do not use the product near a bath, shower or swimming pool.
  • Do not expose the product to direct sunlight.
  • Do not use product together with an external speed controller.
  •  Do not use the product near flammable liquids or gas.
  • Switch off the product and pull out the plug before cleaning.
  • Never leave the product unattended when switched on.
  •  Repairs must only be carried out by an authorised service centre.
  •  If the product stops working properly, switch it off with the switch on the control panel and contact the retailer.

SYMBOLS

  •  Read the instructions.
  • Safety class 11.
  • Approved in accordance with the relevant directives.
  •  Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

  • Rated voltage 230 V ~ 50 Hz

  • Input power 19W
    __

  • Safety class 2

DESCRIPTION

  1.  Plastic nut
  2.  Hub nut
  3.  Rear grille
  4.  Fan blade
  5.  Front grille
  6.  Screw
  7. Washer
  8. Foot
  9.  Bottom upright
  10.  Top upright with control panel
  11.  Motor unit

ASSEMBLY

  1. Put the bottom upright in the foot and screw in place with screw and washer.
  2. Screw the motor unit on the top upright.
  3.  Join the top and bottom uprights to each other.
  4. Unscrew the plastic nut anticlockwise from the motor unit.
  5.  Fit the back grille on the motor unit and lock in place with the plastic nut. Tighten the plastic nut clockwise to lock the back grille.
  6.  Put the fan blade on the motor spindle. Align the taps to the slot in the fan blade. Tighten the hub nut anticlockwise to lock the fan blade.
  7. Fit the grille with the logotype right side up with the clip.
  8. Lock the front gri lle firmly to the back gri lle. Press the gril le with both hands so that it clicks in place and fix with the screw

HOW TO USE

CONTROL PANEL

REMOTE CONTROL

MAINTENANCE

REPLACING THE BATTERY

  1. Open the battery compartment by pressing the lid and pulling it out.

  2. Insert the batteries with the correct polarity in accordance with the markings inside the battery compartment.

  3. Replace the cover

CLEANING

NOTE : Pull out the plug from the power point before installation and/or cleaning.

  • The fan should be cleaned once a month.
  • Clean the fan with a soft cloth moistened with a mild detergent. Make sure that no water or other liquid gets into the fan.

NOTE: Do not use petrol, solvents or detergents that can damage the plastic parts.

014780

Description| Designation| Value| Unit
Max air speed| | 33.17| m’/min
Input power of fan| p| 16.60| w
Operating value| Sv| 2.00| (m’/min) W
Pow er consumption in standby mode| Pss| 0,61| w
Sound power level| LwA| 53.73| dB(A)
Maximum flow speed| C| 4.22| m/s
Annual power consumption| kWh/a| 6,00| kWh/a
Service value standard: IEC 60879:1986 (corr. 1992)
Contact details: www.jula.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ansult User Manuals

Related Manuals