MEARI Speed 9 Home Security Camera for Baby Monitor User Guide
- June 6, 2024
- MEARI
Table of Contents
MEARI Speed 9 Home Security Camera for Baby Monitor
What’s in the box
Please consult this checklist for all parts.
- Speed 9S
- Power adapter
- Bracket
- USB cable
- Pin
- Screws
- Manual
Description
Install
- Use the included mounting bracket to fix the camera to a clean surface.
- Or, put the camera on a flat surface.
Connect
Download Smart Life is available for both iOS and Android OS. Search the name ‘Smart Life’s App Store or Android Market, or scan the QR-Code to download the App.
Set up router The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is connected to the WiFi network.Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi.
Registration process
- Step 1 Open the Smart Life App, click “Register”, read the “Privacy Policy” and click “Agree”
- Step 2 Input a legal and valid Mobile number or Email address and click Continue”. Input Verification Code, then log in to the app.
QR Code Configuration
-
Open the Smart Life App, click “Create a family”, and you can customize the Family name and related settings.
-
Continue to click “Security & Sensor”> > choose”Add Device” or “+”,ready to add camera. “Smart Camera”,and then
-
In “Add Device” this interface, continue to click “next step”, and then you should input your WiFi’s passwords.
Note: The camera only supports a 2.4GHz WiFi network. The number of bits in the SSID and passwords of the router should not exceed 24 digits.
-
In this interface. you should scan the QR code in your phone with the camera, when the camera comes out “dong dong dong”. And you can complete the configuration in about 30s.
-
When connecting. you should make sure your router, mobile, and camera are as close as possible. When the camera is added successfully, click ” you could also DIY the camera’s name.
Setting
In the “Smart Camera” interface, click “A.you can set the camera common functions.
FAQ
- The device cannot be previewed properly?
- Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
- Why is it still in the list of devices after resetting?
- The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
- How to cut the camera network to another router?
- First, remove and reset the device on the App and then configure the device again by the App.
- Why doesn’t the device identify the SD card?
- It is recommended to plug-in SD card after a power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.
- why can’t get the notifications with my cell phone App?
- Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened.
Functions
- Pan/Tilt Rotate your camera by sliding on your smartphone, providing you with 360 degrees of vision.
- Video flip Flip your video stream up or down for maximum flexibility.
- Motion detection Built-in motion sensors detect movement, and the camera will send you push notifications and app alerts.
- Record Support 24H continuous recording with high capacity SD storage Cloud storage.
- One-Touch Call Hear your baby’s call anytime, anywhere.
- Daytime & Night Never miss a moment, even in complete darkness, with powerful night-vision technology.
FCC Statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference
that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment.This
equipment should be installed and operated With a minimum distance of 20cm
between the radiator and your body.
Note: This equipment has been tested and found to comply with the limits fora
Class B digital devices, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. Ihis equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
- the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>