Energizer BTS-205 PowerSound Portable Bluetooth Speaker FM Mode – Carrying Strap User Manual

BTS-205 PowerSound Portable Bluetooth Speaker FM Mode – Carrying Strap
User Manual

Specification

• Model Name: BTS-205
• Cell Type : Lithium Ion
• Battery Capacity : 1800mAh/6.66Wh
• Rated Input : 5V/2A (Max.)
• Rated Output: 5V/2A (Max.)
• Bluetooth Version: 5.0
• Support : Handsfree, FM, Micro SD Card, USB , AUX
• Speaker : 4Q 10W x 2 057mm
• Transmission distance 10M
• Frequency response : 30Hz-20KHz
• Dimensions: 280(L)110(W)110(H)mm
• Weight: 837g±5g

1. Answer/ Reject Incoming Call Button
2. Volume Down/ Previous Button
3. Power Button
4. Mode Button
5. Volume Up/ Next Button
6. Play/ Pause Button
7. Micro SD Card Slot
8. Recharge Port
9. LED Battery Indicator
10. USB-A Output
11. AUX

Package Content

How to USE?

1. Power button: Long press the power button to turn on/off the speaker. Double-click the power button to turn on Bluetooth pairing mode.

2. Bluetooth: Turn on the speaker to enter Bluetooth pairing mode, enable Bluetooth connection on your device, search and connect to “Energizer_BTS-205”

3. Mode button: Press the mode button to switch to Bluetooth, FM, micro SD card, AUX, or USB play mode.

4. Pause and play: Press the power/play button on the device to play or pause the music.

5. Volume control: Long press the volume up button to increase volume, long-press the volume down button to reduce volume.

6. Play next/ previous song: Press the “+” button to play the next song. Press the “-” button to play the previous song.

7. Audio input: Connect a standard 3.5mm audio cable to the AUX port, the speaker will automatically switch to AUX mode, or use the mode button.

8. Micro SD card slot: Insert a micro SD card into the slot, the speaker will automatically switch to SD card mode, or use the mode button. The speaker supports MP3, AAC, WAV, FLAC, APE, WMA, and other formats.

9. USB play mode: Insert a USB flash drive into the USB port, the speaker will automatically switch to USB play mode, or use the mode button.

10. USB-A charging output: Charge your device through a USB-A output port.

11. Recharge port: To charge the speaker, connect the charging cable to your speaker and a power source to begin recharge.

12. LED battery Indicator: Blinking red light indicates charging. A solid light indicates fully charged.

13. FM mode:
    • Long press the play/ pause button (1 sec) to start the automatic tuning.
    • Once tuning is done, long-press the “-” button or “+” button to switch between stations.
    • Press the “-” button or “+” button to decrease or increase in volume.

14. Hands-free Mode (Telephone):
    • Answer an incoming call: Press the answer/ reject incoming call button
    • Reject incoming call: Press and hold the answer/ reject incoming call button
    • Redial: Double press the answer/ reject incoming call button

Note: The battery life of this product is based on the user’s activity and volume control.
FCC Statement NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.
PowerSafe Management
Guarantees against short circuits and over-charging for your power bank and devices.
Customer Service
For any questions about the product, please contact us at service@energizerpowerbanks.com

Safety Instruction

• Avoid water, heat, fire, penetration of the battery, and severe drops at all times.
• Do not insert other objects into the USB ports other than the USB connectors.
• Once the product is fully charged, your power pack automatically shuts off to save power.
• During charge & recharge, the battery may feel slightly warm.
• Do not clean the battery with water or other cleaning products, clean the exterior with a lightly wetted cloth or napkin
• Any intentional and physical damage to the battery will not be under the warranty conditions
• Battery storage temperature is between -10°C-+60°C, operating temperature is 0°C-45°C
• Fully charge the battery before first use to maximize the battery life
• Recommend recharging your power bank with a wall charger/adapter.
• For better performance, avoid recharging the power bank while your device is connected to it.
• Dispose of battery properly; ask local disposal facility for advice.
• Do not disassemble, damage, or incinerate the battery at any time.
• Please use the original accessories such as charging cable and adapter for better performance

WARRANTY
All products from the date of purchase are qualified for a limited-time warranty.
For more warranty information, please visit: http://www.energizerpowerbanks.com FCC ID: 2AU4P-BTS205
RoHS Compliant
Dispose of the battery properly, seek for local disposal facility for advice. Do not dispose of, disassemble, damage, or Incinerate the battery at all times.
© 2021 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC, and related subsidiaries and are used under license by TennRich International Corp. All other brand names are trademarks of their respective owners. Neither TennRich International Corp. nor Energizer Brands, LLC is affiliated with the respective owners of their trademarks.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>