D-Link DCH-S163 A1 Pro Series Battery-Powered Long-Range Water Sensor Add-On Installation Guide
- June 6, 2024
- D-Link
Table of Contents
D-Link DCH-S163 A1 Pro Series Battery-Powered Long-Range Water Sensor
Add-On
Note : This is an add-on to the Pro Series Whole Home Smart Wi-Fi Water
Leak Sensor Starter Kit. The DCH-S162 is required for this device to
function.
Setup Code
This is your device’s Setup Code. Please keep it as future reference for your
device.
Simple Setup
Note : Make sure that your DCH-S162 hub is set up and functioning properly beforehand.
- Get the mydlink app on the App Store or on Google Play. Launch the app, then Sign In or Create a New Account.
- Tap then tap Add a Device.
- Tap Scan, then scan the Setup Code located in the Setup Code section. Follow the app instructions to set up your device with your DCH-S162 hub.
LED Behavior
FAQ
What do I do if my device is not working properly?
Reset and reinstall your device. During installation, ensure that:
- Your router is connected to the Internet and Wi-Fi is enabled
- Your mobile device is connected to your router’s Wi-Fi and Bluetooth is enabled
- Your mydlink device is in range of your Wi-Fi network
- Ensure that your DCH-S162 hub is powered on and installed correctly
How do I reset my device?
DCH-S163: Press and hold the Reset button until it blinks red.
How do I install additional DCH-S163 units?
In the mydlink app, tap then tap Add a Device. Tap Scan, then scan the Setup
Code located on the device. Follow the app instructions to set up the
additional DCH-S163 units with your DCH-S162 hub.
Need Help?
Having trouble installing your new product? D-Link’s support website contains
live chat, video tutorials, commonly asked questions, the latest user
documentation and software updates for D-Link products.
Contact Us
http://support.dlink.ca
800-361-5265
Attention
FFC STATEMENT
FCC:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE : THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
IC：
This device complies with Industry Canada’s license-exempt RSS. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. (3) Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la conformité à l’exposition de RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf.