MEARI Speed 4S High Quality WiFi Camera User Guide
- June 6, 2024
- MEARI
Table of Contents
Speed 4S High Quality WiFi Camera
User Guide
What’s in the box
Consult the checklist below for all components.
Description
Power: DC5V±10%
Status light:
- Red light solid on: the camera network is abnormal
- Blinking red light: awaiting WiFi connecting
- Blue light solid on: camera running correctly
- Blinking blue light: currently connecting
Microphone: Captures sounds for your video
SD card slot: Supports local SD Card storage (Max.128G)
Reset: Press and hold for 5 seconds with pin to reset the device(if you have modified settings, they will return to factory defaults)
Install
1. Use the included mounting bracket to fix the camera to a clean surface.
2. Or, stick the camera to an inclined surface with the adhesive tape we provided.
Connect
Download
Smart Life is available for both iOS and Android OS. Rearch the name ‘Smart Life’in App Store or Android Market, or scan upper QR-Code to download the App.
- Support
Set up router
This device only supports 2.4GHz frequency band router, does not support 5GHz frequency band router, please set the relevant parameters of the router before WiFi configuration, WiFi passwords do not include special characters such as ~!@#$%^&*(). When the device is configured in WiFi, the mobile phone and device are as close as to the router, which can speed up the configuration of the device.
Registration process
Step 1: Open the Smart Life App, click “Register”, read the “Privacy Policy” and click “Agree” .
Step 2: input a legal and valid Mobile number or Email address and click “Continue”. Input Verification Code, then log in the app.
QR Code Configuration
Getting started
- Please follow the instructions and make sure the passwords are inputed correctly.
- One device can only be added with one App account, if the device has been added with another account already, then it can’t be added to any another account again.
- The device will be unbind from previous account after been deleted from App. Further ,the device will be resetted automatically once from blue light to red light.
Process
Step 1: Open the Smart Life App, click “+” or “Add Device”. Then select “All” on the “Select Device Type” page.
Step 2: Select “Security Camera”. Power the device on and make sure the indicator is flashing quickly or a prompt tone is heard.
Step 3: Input WiFi passwords and click “Confirm”, scan the QR Code with a device. (You can change the network connection)
Step 4: Click “I heard the beep” when the device comes out “dong dong dong”. And you can complete the configuration about 30s.
Step 5: The device is added, and the device nickname can also be changed in this interface.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the
SD card is normally available and the format is FAT32. And the TF card can’t
be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system have been opened.
Functions
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with 360
degrees of vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you push
notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage.
Daytime & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
FCC Statement：
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.