AT T S30 Portable Wireless Speaker User Manual

: June 6, 2024
: AT&T

Table of Contents

AT T S30 Portable Wireless Speaker
Introduction
Features
Safety Information
Getting Started
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AT T S30 Portable Wireless Speaker

AT-T-S30-Portable-Wireless-Speaker-product

Introduction

AT-T-S30-Portable-Wireless-Speaker-fig1

Features

High powered Wireless speaker
Wireless streaming through Bluetooth® enabled devices
Built-in microphone
Auxiliary input to play music from any device
Automatically connects to any paired devices

What’s included
Unpack the speaker system and make sure all accessories are put aside so they will not be lost.

AT-T-S30-Portable-Wireless-Speaker-fig2

Safety Information

Warning!

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS.
The lightning flash and arrowhead symbol within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.
WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer service personnel.
The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

Important Safety Instructions
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in this user’s manual and on the unit.

Cleaning – Unplug the unit from the wall outlet before cleaning. Clean the unit using a damp cloth; do not use liquid or aerosol cleaners.
Attachments – Do not use attachments that are not recommended by the manufacturer.
Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
Placement – Do not place the unit on an unstable table, stand, tripod, or bracket. This may result in serious personal injuries and damage to the unit.
Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation nings. Also, it should not be placed in a built-in installation, such as ventilation openings
periods of Non-use – If the unit is left to be unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.
Objects and Liquid Entry – Care should be taken so that external objects do not fall into and liquids are not spilled onto any openings or vents located on the product.
Power Source – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. If you are not sure, please consult the dealer or local power company.
Power Cord protection – Power supply cord should be routed so that it is not likely to be walked on or pinched by items placed upon or against them. It is always better to have a clear area from where the cable exits the unit to where it is plugged into an AC outlet.
Lightning – Unplug the unit from the wall outlet and disconnect the antenna unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.
Overloading – Do not overload wall outlets, extension cords, or integral
Heat – The unit should be situated away from heat sources such as radiators, heat.
Damage Requiring Service -personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled onto the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
Servicing – The user should not attempt to service the unit beyond those methods described in the user’s manual. Opening or removing covers will expose you to dangrous voltage and other hazards.
Safety Check – Upon completion of any service or repair to the unit, ask the service technician to perform safety checks to determine that the product is in proper working condition.
Built-in Battery Care – This device contains a rechargeable Lithium ion battery. The battery can be charged and discharged hundreds of times. Unplug the charger from the electrical outlet and product when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. Leaving the product in hot or cold places will reduce the capacity and lifetime of the battery.