motepro Forza MK700 Red Remote Instructions

June 6, 2024
motepro

MK700 Instructions

  1. Please open the Forza motor by pushing the dark red button located on the motor.

  2. Inside the motor, you will see a receiver board, locate the SW1 button and press this once.

  3. Next press one of the buttons on the new remote (any button) twice.

  4. Please wait a few seconds and test the new remote. Then put the cover back.

WARNING
To prevent possible SERIOUS INJURY or DEATH:

  • Battery is hazardous: NEVER allow children near batteries

  • If the battery is swallowed, immediately notify a doctor.
    To reduce the risk of fire, explosion, or chemical burn:

  • Replace ONLY with the same size and type of battery

  • DO NOT recharge, disassemble, heat above 100° C, or incinerate Battery will cause SEVERE or FATAL injuries in 2 hours or less if swallowed or placed inside any part of the body.

For Gates/Main Doors of unit complexes, the S1 (program) button is usually located in the stand-alone receiver ( it can be found near the motor), as the picture is shown below:

As the arrow pointing, the SW1 (Learn_1) button is inside the receiver, then you can follow the same instructions above.

www.remotepro.com.au

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals