Motepro RC01 4D Doors Art Instructions
- June 3, 2024
- motepro
Table of Contents
Motepro RC01 4D Doors Art Instructions
4D Doors Art RC01 Instructions
Action
Insert mains plug.
Hold down button TA2 for ~6 sec …
Release button TA2.
Hold down button TA3 or TA 1, to move the door to the desired “OPEN
DOOR” position. In its .OPEN” position the door must maintain a minimum
distance of approx. 50 mm to its limit stop.
deadman function, see Learning mode, 10.3 on page 17.
Briefly press button
TA2 once.
Dis la / Info
The software version is displayed … until L flashes on the display.
The control lighting flashes at
The learning process begins; the door closes, opens and then closes another 2x
automatically. After 5 learning movements, the control lighting switches on
and the opener moves the door to the
Door Open E:nd position.
WARNING!
Because the power shut down does not function during the teaching process, it is essential that the installer remains at the device to prevent anyone from getting close to the door.
WARNING!
This product may contain a coin/butte& cell battery. Keep product and
batteries away from children. Battery can cause ‘ severe or fatal injuries in
L hours or less 1f swallowed or placed inside •
any part of the body. Seek immediate medical attention if it ~ is suspected
that a coinlbutton ~ batlery has been swallowed or placed inside of any part
of the body.
Read More About This Manual & Download PDF:
References
- Garage Door Remotes | Car Remotes | Free Shipping AU Wide – Remote Pro
- Garage Door Remotes | Car Remotes | Free Shipping AU Wide – Remote Pro