Motepro Airport Upgrade Kit Instructions
- June 3, 2024
- motepro
Table of Contents
Motepro Airport Upgrade Kit
Airport Upgrade Kit Instructions
- Switch off the power point and remove the plug from the wall.
- Unscrew the screws in each corner of the wall box and remove the lid.
- Gently slide out to the right the receiver card outlined in the image below.
- Insert the new receiver card by sliding it onto the pins.
- Plug in and switch power on.
- Program the new remotes by holding down the SW1 button located on the receiver card and do not let go
- Press any button on the new remote two times (holding the remote button for 2 seconds each press)
- Let go of the SW1 button and test.
- Repeat steps 5-7 for additional remotes.
- Place back the cover and screw in place.
WARNING!
This product may contain a coin/button cell battery. Keep product and
batteries away from children. Battery can cause severe or fatal injuries in 2
hours or less if swallowed or placed inside any part of the body. Seek
immediate medical attention if it is suspected that a coin/button battery has
been Swallowed or placed inside of any part of the body.
References
- Garage Door Remotes | Car Remotes | Free Shipping AU Wide – Remote Pro
- Garage Door Remotes | Car Remotes | Free Shipping AU Wide – Remote Pro
Read User Manual Online (PDF format)
Loading......