Shen Zhen Gtl Technology G608 3-In-1 Fast Foldable Wireless Charging Station Instruction Manual
- June 6, 2024
- Shen Zhen Gtl Technology
Table of Contents
Shen Zhen Gtl Technology G608 3-In-1 Fast Foldable Wireless Charging
Station
Introduction
- Wireless charging area of mobile phone
- Charging area of Biluetooth headset
- WIreless chargIng area of watch
- Operating indicator
- TYPE-C Female
Operation instructions
- Charging the mobile phone: Put the mobile phone upright in the wireless charging area of mobile phone, and you can see the “Charging indicator” on the display of the mobile phone, showing that it is being charged properly. (Attention: The phone cannot be charged when placed horizontally)
- Charging the watch: Put the watch on the wireless charging area of watch, and align the magnets; the “Charging indicator on the watch will ight up, indicating that it is being charged properly.
- Charging the Bluetooth headset: Please put the Bluetooth headset at the center of the charging area.
- This product needs to be powered with an adapter with a power of 9V—2A and connected to the type-c port. When the bottom power indicator is on, it means that the power supply is connected.
- Operating indicator: The blue working indicator is always on during the charging process of the mobile phone, which is off when it is not being charged or fully charged; it will fash in case of any charging fault.
Specifications
- Name: 3 in 1 wireless charger
- Model: G608
- Product size: 100 114,5 131.7 (mm)
- Power Supply Port: Type C
- Input: 9V 2A
- Maximum output power: 18W
Matters needing attention
- When charging the device, do not use a protective cover with a thickness of more than 5mm, and do not use a protective cover with a metal sheet.
- Do not put metal foreign objects in the charging area.
- When charging, please aim the device at the center of the charging area.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>