MEARI Speed 2 S IP Camera User Guide

MEARI Speed 2 S IP Camera User Guide

What’s in the box

Consult the checklist below for all components

Description

Power

|

DC12 ± 10%

---|---
Status light|

• Red light solids on: the camera network is abnormal
• Blinking red light: awaiting WiFi connection (faster blinking)
• Blue light solids on: camera running correctly
• Blinking blue light currently connecting (faster blinking

Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (build-in SD Card)
Reset| Press and hold for S seconds with pin to reset the camera (if you have modified settings, they will return to factory defaults)

Install

Ceiling type

1. Take the metallic components apart from bracket.
2. Fix the bracket on the ceiling with screws
3. Rotate the camera to snap into ‘racket.
   

Wall mounting type

1.  Fix the bracket on the wall with screws shown as the picture.
2. Rotate the camera to snap into bracket.

Connect

Download
Smart Life is available for both iOS and Android OS. Rearch the name Smart Life’ in App Store or Andro I Upload to prntscr.com (Ctrl+D) Ile to download the App.

•   Support

IOS

Android

Download App (IOS & android)

Set up router
This device only supports 2.4GHz frequency band router, does not support 5GHz frequency band router, please set the relevant parameters of the router before WiFi configuration. WiFi passwords do not include special characters such as -!@#$%’&1). When the device is configured in WiFi, the mobile phone and device are as close as to the router, which can speed up the configuration of the device.

Registration Process

Step 1 Open the smart life App, Click “Register ” Read the “Privacy policy” and Click “Agree”

Step 2 input a legal and valid Mobile number a Email address and click ‘Continue’. Input Verification Code. then log ki the app.

QR Code Configuration

Getting Started

1. Please follow the Instructions and make site the passwords are mowed correctly.
2. One device can only be added with one App account, if the device has been added with another account already. then it can’t be added to any another account again.
3. The device will be unbind from previous account aver been deleted from App. Further the device will be resend automatically once from blue light to red tight.

Process

Step 1 Open the Smart Life App, click ‘+’ or ‘Add Device’. Then select ‘AV on the ‘Select Device Type’ page.

Step 2 Select “Security Camera” Power the device on and make sure the indicator is flashing or a prompt tone is head.

Step 3 Input WFi passmxds and click ‘Confirm’. scan the OR Code with a device. (You can change the network connection)

Step 4 Click 1 heard the beep’ when the device canes out ‘dong dong dong’. And you can complete the configuration about 30s.

Step 5 The device is added. and the device rickname can also be changed in this interface.

• Q: The devote cannot be previewed property?
  A: Check whether the network is normal, you can place the camera close to the router. and it not. is recommended to reset the device and add it again.

• Q: Why is it still in the list of devices after resoling?
  A: The reset device only resets the network configuration of the camera. but cannot change the configuration on the App. remove the camera. and must be deleted by the App.

• Q: Haw to cut the camera network to another router?
  A: First remove and reset the device on the App and then configure the device again by the App.

• Q: Why doesn’t the device identify the SD card?
  A: It is recommended to plug n SD card after power cut Confirm whether the SD card is normally available and the format is FAT32. And the TF card can t be identified when the Internet environment is not good.

• Q: Why I can’ t get the notifications with my cell phone App?
  A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened: Message notification and authority confirmation in the mobile phone system have been opened.

Functions

• Pan/Title
  Rotate your camera by sliding on your smartphone. providing you with 360 degrees of vision.

• Video flip
  Flip your video stream up or down for maximum flexibility.

• Motion detection
  Built-in motion sensors detect movement. and the camera will send you push notifications and app alerts.

• Record
  Support 24H continuous recording with high capacity SD storage.

• Day & Night
  Never miss a moment. even in complete darkness. with powerful night-vision technology.
  

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. FCC

Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>