ROADEFEND AI-5-E Intelligent Driving Assist System User Manual
- June 6, 2024
- ROADEFEND
Table of Contents
ROADEFEND AI-5-E Intelligent Driving Assist System
Safety Instructions
If you find some inconsistencyin this manual during use, please consult the
technical support department. The content will be updated over time to time
without notice.
Installation Precautions
In order to ensure the normal operation of the equipment, to extend its
service life, please ensure that it meets the specifications during
installation.
- The device should be installed horizontally, as far as possible from locations with high vibrations, where there is no interference from other electronic equipment, the ventilation is good, there is no shielding, covering, the machine and its accessories and peripherals should be installed in a position that is not easily accessible to passengers and drivers
- Please pay attention to waterproof, moisture and lightning protection when installing the equipment;
- Remember not to touch the power supply and the device with wet hands; do not spill liquid on the device to avoid short circuit or fire inside the machine;
- This machine is compatible with 12V and 24V power supply, please pay attention to the positive and negative poles when wiring to avoid short circuit;\
- When connecting other external devices, please turn off the power of this machine. Do not plug and unplug while powered on;
- It is strictly forbidden to move the machine or replace components with electricity, otherwise it will damage the equipment;
- Do not place other equipment directly on thisproduct upper part
- Non-professionals are not allowed to disassemble the case by themselves to avoid damage and electric shock;
**Product description
**
The product is a full HD vehicles driving recorder with intelligent analysis
systemintegrated, supporting the following functions:Driver status monitoring
and warning (DMS), forward collision warning (forward ADAS), blind zone
detection and warning (BSD), hands off the steering wheel (HOD), overcrowded
aisle detection (OCD),support for GPS positioning, 4G network communication
module, multi-channel video surveillance etc., can improve the driving safety
of the driver. It is equipped with a multi-channel AI analysis performance
system, that allows it to be flexible and expand through softwarethe
stability,compatibility, maintainability and performance of the OS throughout
its lifetime.
Product features
- Full-featured active safety integrated machine
- GPS positioning
- Built-in LCD display and printer
- Maximum support8 channels 1080P HD audio and video input
- Professional and powerful AI chip
- 4-core A53 processor, 1.2TOPS NPU,Native SATAinterface, 64-bit DDR4
- It can also support DMS, ADAS, BSD, HOD, OCD and other algorithms, and has further algorithm scalability
- Simple and stable hardware design
- GPS optimized design, minimize circuit interference
- Damping support structure for hard disk storage, vehicle shaking resistance and adapt to various road conditions
- Professional and reliable system solutions
- Built-in EMMC, support loop recording, dual backup for emergency recording
- Built-in battery and optimized power supply design, guaranteed at the moment of external power failure
- Roadefend dedicated video file system, ensure the confidentiality and security of video data
- Professional and reliable active safety
- Support DMS, ADAS, BSD, HOD, OCD
- Deep learning technology: accurate target recognition and fast iteration update
- Support the latest neural network in the industry
Appearance description
Host view
Rearview of the host
System connection diagram
Note: The solution is flexible and can be customized according to customer needs.
One, Product configuration list
ProductBoxChecklist
1| AI-5-E host| 1| station|
---|---|---|---|---
2| power cable| 1| root|
3| GPS antenna| 1| root|
4| 4G antenna| 1| root|
5| Host bracket| 2| A|
6
| Mounting screws for
mainframe bracket
| ****
4
| ****
Piece
|
7| Door lock key| 1| string|
8| Triangle certificate| 1| |
9| Driver Identification Card| 2| |
10
| ****
Cross countersunk flat head screws
| ****
6
| ****
A
| 2× fixed hard disk and hard disk box
4×Fixed bracket and host
Product accessories
Option list
Category | classification | Category | classification |
---|
DMS
| DMS camera
standard
| ****
Storage medium
| SD card
High-profile DMS
camera
| hard disk
Category| classification| Category| classification
---|---|---|---
ADAS
| High-profile ADAS
camera standard
|
CVBS screen 7 inch 800*400
| Display
ADAS camera| Video patch cord
BSD| BSD camera|
remote control
| Infrared remote
control
HOD| HOD camera| AAA battery
OCD| OCD camera|
Audible alarm
| Audible alarm
Multi-camera| Multi-channel camera| Sound and light
alarm extension cord
Host optional wiring harness
| Communication wire
harness
|
Other Accessories
| Mounting frame
Audio and video
wiring harness
| USB WiFi
14PIN wiring harness| Hand mark
Camera extension cord| External speaker
Internet of Things card
Configuration reference
The product configuration is flexible. The following simplified
configurations are for reference only. For details, please contact sales or
technical support.
Equipment harness
A variety of functions combination selection. For details, please contact
sales or technical support.
Power harness
For products power and ignition signal access
Communication harness
Used to connect car body hardware cable signals, such as brakes,left/right
turn signal,far/Low beam lights, CANCommunication. Detailed reference harness
definition below
Audio and video wiring harness
Three, Product function overview
Remote control introduction
This product can be optionally equipped with CVBS screen, and use the
remote control to change various settings of the device.
Features
Function type | Function Description | Voice prompts |
---|
Advanced driver assistance system
Lane departure
| LDW: Lane Departure Warning
When the vehicle speed exceeds the set value, the device will issue a warning when the driver leaves the lane
unintentionally
| ****
“Beep Beep”
Forward collision
| FCW: Forward Collision Warning
If the vehicle speed exceeds the set speed and the collision
time with the preceding vehicle is lower than the set safety time threshold, the device will issue an early warning
| ****
“Doodle Doodle”
Distance detection
| HMW: Headway Monitoring & Warning
When the vehicle speed exceeds the set value and the
distance is kept less than the set minimum time interval, the device will issue an early warning
| ****
“Please keep the distance”
Pedestrian collision warning| PCW: Pedestrian Collision Warning
Warn about impending collisions with pedestrians in front of the car
| ****
“Doodle”
Traffic sign recognition
| TSR: Traffic Sign Recognition
When the vehicle is on the road, identify and judge the traffic signs in advance
| ****
According to the logo identifyprompt
Zebra crossing detection
| CWW: Cross Walk Warning
When the vehicle is on the road and the zebra crossing is recognized in advance, the device will issue an early
warning
| ****
“Please note at the intersection”
Camera blocking| Covering the camera fora period exceeding the set time, the
device will issue an occlusion alarm| “Abnormal forward camera”
Function type| Function Description| Voice prompts
---|---|---
Driver status monitoring
Fatigue driving warning
| When it is found that the driver enters the doze state and exceeds the set warning threshold, the device sends out an
alarm
|
“You are tired, please be safe”
Distracted driving warning
| When the driver’s attention is not focused on the road ahead, including the occurrence of head-up, head-down, and left-right look,yawn, the device sounds an alarm when looking down at a
mobile phone and other actions
|
“Please pay attention to the front”
phone
| When the driver makes a call while driving, the device issues an alarm| “Please concentrate on driving”
Smoking
| When the driver smokes while driving, the device will give an alarm| “Please concentrate on driving”
Driver abnormal alarm
| When the driver deviates from the driving position and the
device cannot detect the driver’s face, the device issues an alarm
|
“Dang~Dang~”
Sunglasses blocking| When the driver wears infrared blocking sunglasses while driving, the device sends out an alarm| “Please replace sunglasses”
Substitution reminder
| After the vehicle turns from stop to travel and reaches the set speed, the device monitors the identity of the driver, and when
a driver change is detected, the device issues a voice prompt
|
“Driver has changed”
Camera blocking
| If the blocking object covers the driver’s status monitoring
camera for more than the set time, the device will send out a blocking alarm
|
“Do not block the camera”
Blind zone detection auxiliary system
Right blind spot detection
| RBSD: Right-Blind Spot Detection
When the vehicle is driving and detects the presence of
pedestrians, vehicles and other obstacles on the right blind area, the device will issue a warning,
|
“Please note the pedestrian on the right”
Other auxiliary systems
Hand detachment| HOD: Hands-Off Detection
When the driver is driving and the hand is off the steering
| “Please hold the steering wheel with
detection| wheel, the device will issue a warning| both hands”
---|---|---
Aisle overrun
| OCD: Overcrowded Detection
When the aisle is overrun, the device will issue a warning
| “Do not stand in the aisle”
Intense driving
| Rapid acceleration, abrupt deceleration, sharp turn, vehicle rollover| According to the marked driving instructions
Other main functions
Function type | Function Description |
---|
System functions
| Equipment self-check, remote upgrade and configuration, local recording,
alarm upload
APP calibration| Support “Roadefend” APP for device calibration
Platform docking
| The default docking platform can support docking of other mini-standard
platforms
Connectable peripherals| AHD cameras, sound and light alarms, speakers, etc.
Four, Product specification
Basic Information
Product size (mm)| 188×184×60
Rated power (W)| MAX: 52W
Working parameter
| Operating
temperature
| -25~70℃
storage
temperature
| -40~85℃
Relative
Humidity
| 10~90% RH(No condensation)
Operating
Voltage
| 8~32V
communication/Peripheral
| ****
4G
| Support wide range of operators
Independent SIM card slot
Positioning module| GPS/BD dual mode, blue Fakra interface
FAKRA C/Blue antenna interface
| | Support positioning antenna open circuit and short circuit
detection
---|---|---
RS232| stand by5×RS232, baud rate adjustable, 3 of which are
multiplexed
RS485| stand by1×RS485
CAN| stand by2×CAN communication, adjustable baud rate
Ethernet| Provide IPC network sharing
Infrared| Support 1× infrared receiver
DI| stand by8×Digital input+1Pulse input
DO| stand by3×5VDigital output
AD| stand by2×Analog input, accuracy12bit,
Detectable0-36VVoltage
powered by| stand by12Vwith5V pair external power supply
Basic Information
video
| enter| MAX 8 video inputs
Output| stand by1×CVBSOutput,band12VPower output
Audio
| enter| MAX 8 waysound frequency input
Output| stand by2×Audio output, ×1 built-in device, ×1 external amplifier
storage
| EMMC| Inside EMMC, support loop recording
hard disk| stand by2.5-inch 7mm mechanical/solid-state SATA hard disk, maximum
support 2T
SD| MAX support2×SD card, maximum support 256G
other| Shock-absorbing design, door lock control
External interface
| Power interface: 6pin
Communication Interface: 32pin
Audio and video port: 40pin
Extension ports: 14pin
Wi-Fi| External USB Wi-Fi: MT7601, 802.11n, USB2.0 interface
printer| Built-in printer
Driver identification IC
card
| Contact IC card
Five, User notice
- This product is a fullHDVehicle-mounted intelligent analysis system and can help enterprises manage fleet inreal-time and understand the running state of the vehicle.
- Drivers can use this product to reduce the possibility of traffic accidents caused by manual driving, but they cannot replace safe driving.
- Installation and calibration will affect the identification and response of the system. The installation and calibration must be carried out by a dealer or professional installer authorized by our company during installation.
- Road and weather conditions will affect ADAS, the recognition and response of the BSD function have an impact. In the case of unclear road markings and bad weather, the system recognition accuracy will decrease.
- This product is designed to improve driving safety and reduce the incidence of accidents. During use, you must ensure that the camera has a clear field of view and avoid damage to the equipment.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.