SUPERATV FBG-P-RZRTS-00 Front Brush Guard Instruction Manual
- June 3, 2024
- SUPERATV
Table of Contents
SUPERATV FBG-P-RZRTS-00 Front Brush Guard
INSTALLATION INSTRUCTIONS
Front Brush Guard : for Polaris RZR XP® Turbo S Winch not included with Front Brush Guard; shown for illustration only
Need help with your installation?
- sales@superatv.com
- 1-855-743-3427
- www.superatv.com
- 8:00am – 8:00pm EST M-Th 8:00am – 7:00pm EST Friday 9:00am – 2:00pm EST Saturday
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by SuperATV® and is not recommended.
SuperATV’s® products could interfere with other aftermarket accessories. If
user has aftermarket products on machine, contact SuperATV® to verify that
they will work together. Although SuperATV® has thousands of satisfied
customers, user should be aware that installing lift kits, long travel, or
suspension kits, tires, etc. will change the ride of machine and may increase
maintenance and part wear. Operating any off-road machine while, or after,
consuming alcohol and/or drugs increases risk of bodily harm or death. No
warranty or representation is made as to this product’s ability to protect
user from severe injury or death. SuperATV® urges operators and occupants to
wear a helmet and appropriate riding gear at all times. By purchasing and
installing SuperATV® products, user agrees that should damages occur,
SuperATV® will not be held responsible for loss of time, use, labor fees,
replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not
be held responsible for any direct, indirect, incidental, special, or
consequential damages that result from any product purchased from SuperATV®.
The total liability of seller to user for all damages, losses, and causes of
action, if any, shall not exceed the total purchase price paid for the product
that gave rise to the claim. SuperATV® will warranty only parts provided by
SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other
manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and
products are not warranted if item was not installed properly, misused, or
modified.
Installing, adding, modifying, or fabricating any factory or aftermarket
product to your ATV/UTV may violate certain local, state, and federal laws. Be
advised that laws vary depending on town, city, county, state, etc. Use of
certain products on public streets, roads, or highways may be in violation
law. The Buyer is solely and exclusively legally and personally responsible
for any violation of the law by the installation or use of the product. You
must abide by all local, state, and federal laws, including but not limited to
vehicle safety, traffic laws, and ordinances. It is your responsibility to
know the laws and how they apply to you. The Buyer is responsible to fully
understanding the capability and limitations of his/her vehicle according to
manufacturer specifications, warnings and instructions and agrees to hold
SuperATV® harmless from any damage resulting from failure to adhere to such
specifications, warnings and/ or instructions. The Buyer is also responsible
to obey all applicable federal, state, and local laws and ordinances when
operating his/her vehicle while using this product, and the Buyer agrees to
hold SuperATV® harmless from any violation thereof.
- Install Backing Plate (E) to Frame with hardware shown; tighten completely.
- Install Winch to Winch Mount (B). Hardware included with Winch; tighten completely.
- Install Winch Mount (B) to Backing Plate (E) with hardware shown.
- Secure Winch Mount (B) to Tow Hook Backer with hardware shown.
- Install Fairlead to Brush Guard (A). Fairlead and hardware included with Winch; tighten completely.
depending on Winch size, Fairlead may be smaller and require installation of provided Fairlead Adapter
Fairlead Adapter install:
- Install Fairlead Adapter (C) to Brush Guard (A) with the hardware shown; tighten completely.
- Install Fairlead to Fairlead Adapter (C). Fairlead and hardware included with Winch; tighten completely.
Installing without a Winch
- Install Fairlead Cover (D) to Brush Guard (A) with hardware shown; tighten completely.
- Install Brush Guard (A) to Winch Mount (B) with hardware shown; tighten completely.
- Secure lower section of Brush Guard (A) to Winch Mount (B) with hardware shown.
- Install Caps to each end of Brush Guard (A).
- Tighten all hardware completely.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>