dji AGRAS T30 Digital Flashship for Agriculture User Guide

dji AGRAS T30 Digital Flashship for Agriculture

Aircraft

The AGRAS[TM] T30 is DJI’s next-generation aircraft, boasting a revolutionary transforming structure and a max payload of up to 30 kg. Using DJI’s digital agriculture solutions, the performance and efficiency of crop protection operations can be greatly enhanced and improved. With the updated Route Operation mode users can mark obstacles outside of the operation area for Smart Continuous Flight. The new Smart Supply Reminder calculates both the remaining liquid amount and battery life to help users manage spraying operations.
The aircraft comes equipped with the Spherical Perception Radar System, a pioneering new system for the agriculture industry. Consisting of the Omnidirectional Digital Radar and Upward Radar, the system provides functions such as terrain-following, obstacle sensing, and obstacle circumventing. With the forward and backward FPV cameras and bright spotlights, the system comprehensively ensures operational safety day and night in different weather.
Thanks to the innovative new plunger pumps and the 16 sprinklers, the spraying system offers improved spray width, rate, distribution, and efficiency. The 2-channel electromagnetic flow meter and continuous liquid level gauge make measurements more accurate than ever. To spray orchards, users can purchase the optional orchard spraying kit to transform the aircraft into ORCHARD FORM. When spraying orchards, branch-targeting technology can be used for precise spraying with the help of the all-new Spherical Perception Radar System and DJI Agras Cloud.
Core components have two layers of protection and the aircraft has a protection rating of IP67 (IEC standard 60529) so that it can be washed directly with water.

1. Propellers
2. Motors
3. ESCs
4. Aircraft Front Indicators (on three front arms)
5. Frame Arms
6. Folding Detection Sensors (built-in)
7. Hoses
8. Sprinklers
9. Nozzles
10. Electromagnetic Exhaust Valves
11. Omnidirectional Digital Radar
12. Upward Radar
13. Heat Sinks
14. Liquid Level Gauge
15. Spread Tank
16.  Battery Compartment
17.  Forward FPV Camera
18. backward FPV Camera
19. Landing Gear
20. OCUSYNCTM Antennas
21.  Onboard D-RTKTM Antennas
22. Aircraft Status Indicators (on three rear arms)

Remote Controller

The Smart Controller 3.0 uses DJI OcuSync 2.0 transmission technology, has a max transmission distance of up to 7 km, and supports Wi-Fi and Bluetooth. The remote controller has a 5.5-inch bright, dedicated screen and comes with the updated DJI Agras app built-in, delivering a smooth and easy-to-use experience. When the RTK dongle is connected to the remote controller, users can plan operations to centimeter-level precision. The Multi-Aircraft Control mode of the remote controller can be used to coordinate the operation of up to five aircraft at the same time, enabling pilots to work efficiently. Both the built-in battery and external battery can be used to supply power to the remote controller. The remote controller has a working time of up to 4 hours, making it ideal for long and high-intensity operations.

1. Antennas
2. Back/Function Button
3. Control Stick
4. RTH Button
5. Button C3 (customizable)
6. Flight Mode Switch
7. Status LED Descriptions
8. Battery Level Indicators
9. 5D Button (customizable)
10. Power Button
11. Confirm Button
12. Touch Screen
13. USB-C Charging Port
14. Dongle Compartment Cover
15. Spray Rate Dial
16. Spray Button
17. HDMI Port
18. microSD Card Slot
19. USB-A Port
20. FPV/Map Switch Button
21. Work Efficiency Dial
22. Air Outlet
23. Button C1 (customizable)
24. Button C2 (customizable)
25. Battery Cover
26. Battery Cover Release Button
27. Handle

The figure below shows the function that each control stick movement performs and uses Mode 2 as an example. In Mode 2, the left stick is used to control the altitude and heading of the aircraft while the right stick is used to control the forward, backward, left, and right movements.

• The remote controller is able to reach its maximum transmission distance (FCC/NCC: 7 km (4.35 mi); SRRC: 5 km (3.11 mi); CE/KCC/MIC: 4 km (2.49 mi)) in an open area with no electromagnetic interference, and at an altitude of approximately 2.5 m (8.2 ft).
  Make sure to comply with local laws and regulations when using Multi-Aircraft Control mode.

Fly Safe

It is important to understand some basic flight guidelines, both for your protection and for the safety of those around you.

1. Flying in Open Areas: pay attention to utility poles, power lines, and other obstacles. DO NOT fly near or above water, people, or animals.
2. Maintain Control at All Times: keep your hands on the remote controller and maintain control of the aircraft when it is in flight, even when using intelligent functions such as the Route and A-B Route operation modes and Smart Return to Home.
3. Maintain Line of Sight: maintain visual line of sight (VLOS) with your aircraft at all times and avoid flying behind buildings or other obstacles that may block your view.
4. Monitor Your Altitude: for the safety of manned aircraft and other air traffic, fly at altitudes lower than 30 m (98 ft) and in accordance with all local laws and regulations.

Visit https://[www.dji.com/](http://www.dji.com/)flysafe for more information on critical safety features such as GEO zones.

Flight Environment Requirements

1. DO NOT use the aircraft to spray in winds exceeding 18 kph (11 mph).
2. DO NOT use the aircraft in adverse weather conditions such as winds exceeding 28 kph (17 mph), heavy rain exceeding 25 mm (0.98 in) in 12 hours, snow, or fog.
3. DO NOT fly more than 4.5 km (14,763 ft) above sea level.
4. Once the operating altitude reaches 1 km (3,280 ft), the payload capacity of the spray tank is reduced by 3.6 kg. For every additional km, the payload capacity will be reduced a further 3.6 kg.
5. Make sure that there is a strong GNSS signal and the D-RTK antennas are unobstructed during operation.

Return to Home (RTH)
The aircraft will automatically return to the Home Point in the following situations:

• Smart RTH: user presses and holds the RTH button.
• Failsafe RTH: the remote controller signal is lost.*

If there is an obstacle within 20 m of the aircraft, the aircraft decelerates and brakes and hovers. If the aircraft comes within 6 m of the obstacle while decelerating, the aircraft brakes, flies backward to approx. 6 m from the obstacle, and hovers. The aircraft exits RTH and waits for further commands.
If RTH is triggered during Route operations, the aircraft can plan a flight path for RTH to circumvent the obstacles added when planning a field.

• If Failsafe RTH is disabled (the default setting in the DJI Agras app), the aircraft hovers in place when the remote controller signal is lost.

Obstacle avoidance is disabled when the aircraft is in Attitude mode, which it enters in situations such as when the GNSS  signal is weak. Note that obstacle avoidance is unreliable when using the aircraft in environments where the radar module cannot operate normally. Extra caution is required in such situations.

Pesticide Usage

1. Avoid the use of powder pesticides as much as possible as they may reduce the service life of the spraying system.
2. Pesticides are poisonous and pose serious risks to safety. Only use them in strict accordance with their specifications.
3. Use clean water to mix the pesticide and filter the mixed liquid before pouring into the spray tank to avoid blocking the strainer.
4. Effective use of pesticides depends on pesticide density, spray rate, spray distance, aircraft speed, wind speed, wind direction, temperature, and humidity. Consider all factors when using pesticides.
5. DO NOT compromise the safety of people, animals, or the environment during operation.

It is important to understand the basic flight guidelines, both for your protection and for the safety of those around you.

Using the T30

1. Preparing the Intelligent Flight Battery
   Only use official DJI flight batteries (model: BAX501-29000mAh-51.8V). Check the battery level before flying and charge according to the corresponding manual document.

2. Preparing the Aircraft

Make sure that the battery is firmly inserted into the aircraft. Only insert or remove the battery when the aircraft is powered off. To remove the battery, press and hold the clamp and lift the battery up.
When folding the arms, make sure to fold the M3 and M5 arms first, and then the M2 and M6 arms. Otherwise, the arms may be damaged. Lift and lower the M1 and M4 arms gently to reduce wear and tear.

Preparing the Remote Controller

Charging the Batteries
Charge the external Intelligent Battery using the charging hub and AC power adapter. Charge the internal battery of theremote controller using the USB charger and USB-C cable. Fully charge the batteries before using for the first time.

Mounting the External Battery

1. Press the battery cover release button on the back of the remote controller down to open the cover.
2. Insert the Intelligent Battery into the compartment and push it to the top.
3. Close the cover.

To remove the Intelligent Battery, press and hold the battery release button and push the battery downward.

Mounting the Dongle and SIM Card

1. Only use a DJI-approved dongle. The dongle supports various network standards. Use a SIM card that is compatible with the chosen mobile network provider and select a mobile data plan according to the planned level of usage.

2. The dongle and SIM card enable the remote controller to access specific networks and platforms such as the DJI Agras Management Platform. Make sure to insert them correctly. Otherwise, network access will not be available.

3. Remove the dongle compartment cover.

4. Make sure the SIM card is inserted into the dongle. Insert the dongle into the USB port and test the dongle.*

5. Reattach the cover firmly.

• Test procedure: Press the remote controller power button and press again and hold to power on the remote controller. In DJI Agras, tap , and select Network Diagnostics. The dongle and SIM card are functioning properly if the status of all the devices in the network chain are shown in green.

Mounting the RTK Dongle
When using the RTK planning method to plan the operation area, attach the RTK dongle to the USB-A port on the remote controller.
Checking the Battery Levels

Press the power button on the remote controller once to check the internal battery level. Press once and press again and hold for two seconds to power on or off.
Press the battery level button on the external Intelligent Battery once to check the battery level.

When using an external Intelligent Battery, it is still necessary to make sure that the internal battery has some power. Otherwise, the remote controller cannot be powered on.

Adjusting the Antennas
Lift the antennas and adjust them. The strength of the remote controller signal is affected by the position of the antennas. For an optimal connection between the remote controller and aircraft, make sure the angle between the antennas and the back of the remote controller is 80° or 180°. Try to keep the aircraft inside the optimal transmission zone. If the signal is weak, adjust the antennas or fly the aircraft closer.
Optimal Transmission Zone

• Avoid using wireless devices that use the same frequency bands as the remote controller.
• If the RTK dongle is used for RTK planning, the module should be disconnected from the remote controller after planning is completed. Otherwise, it will affect the communication performance of the remote controller.

Getting Ready for Takeoff

1. Place the aircraft on open, flat ground with the rear of the aircraft facing toward you.
2. Make sure that the propellers are securely mounted, there are no foreign objects in or on the motors and propellers, the propeller blades and arms are unfolded, and the arm locks are firmly fastened.
3. Make sure that the spray tank and flight battery are firmly in place.
4. Pour liquid into the spray tank and tighten the cover. Make sure that the four lines on the cover are aligned to the horizontal or vertical direction.
5. Power on the remote controller, make sure that the DJI Agras app is open, and power on the aircraft.

When using for the first time, activate the aircraft using the DJI Agras app. A DJI account and internet connection arerequired.

Calibrating the Compass

When the app prompts that compass calibration is required, tap, then, and swipe to the bottom. Select Advanced Settings, then IMU, and Compass Calibration. Tap Calibration in Compass Calibration and follow the on-screen instructions.
Calibrating the Flow Meter
Make sure to calibrate the flow meter before using for the first time. Otherwise, the spraying performance may be adversely affected.

1. Preparation: Discharging the Bubbles in the Hoses
2. Fill the spray tank with approximately 10 L of water.
3. Use the automatic bubbles discharge function to discharge the bubbles according to the descriptions in the discharging the Bubbles in the Hoses section below. Users can also manually discharge the bubbles. Press the spray button to spray the bubbles and press the button again once all bubbles are discharged.
4. Calibration
5. In the app, tap Execute Task to enter Operation View. Tap , then , swipe down, and tap Calibration on the  right of the flow meter calibration section.
6. Tap Start Calibration to begin. Calibration will be complete after 25 seconds and the results are displayed in the app.
7. Users can proceed once calibration is completed successfully.
8. If calibration fails, tap “?” to view and resolve the problem. Recalibrate once the problem is resolved.

Discharging the Bubbles in the Hoses
The T30 features an automatic bubbles discharge function. When it is necessary to discharge bubbles, press and hold the spray button for two seconds. The aircraft will discharge automatically until the bubbles are fully discharged.

Flight

In the app, go to Operation View. Make sure that there is a strong GNSS signal and the system status bar indicates Manual Route (GNSS) or Manual Route (RTK).* Otherwise, the aircraft cannot take off.
In order for the aircraft to automatically take off and perform an operation, it is recommended to create a plan for a field and select an operation before takeoff. Refer to the Starting Operations section for more information. For other scenarios, take off and land manually.

• RTK positioning is recommended. In the app, go to Operation View, tap , then RTK to enable Aircraft RTK Positioning, and select a method for receiving RTK signals.
  Takeoff
  Perform a Combination Stick Command (CSC) and push the throttle stick up to take off.

Landing
To land, pull down on the throttle stick to descend until the aircraft touches the ground. There are two methods to stop the motors.
Method 1: when the aircraft has landed, push and hold the throttle stick down. The motors will stop after three seconds. Throttle Stick
Method 2: When the aircraft has landed, push the throttle stick down, and perform the same CSC that was used to start the motors. Release both sticks once the motors have stopped.

WARNING

1. Spinning propellers can be dangerous. Stay away from spinning propellers and motors. DO NOT start the motors inconfined spaces or where there are people nearby.
2. Maintain control of the remote controller as long as the motors are running.
3. DO NOT stop the motors mid-flight unless in an emergency situation where doing so will reduce the risk of damage orinjury.
4. It is recommended to use Method 1 to stop the motors. When using Method 2 to stop the motors, the aircraft may roll over if it is not completely grounded. Use Method 2 with caution.
5. After landing, power off the aircraft before turning off the remote controller.

Starting Operations
After the operation area and obstacles have been measured and settings have been configured, the DJI Agras app uses a built-in intelligent operation planning system to produce a flight route based on the user’s input. Users can invoke an operation after planning a field. The aircraft will begin the operation automatically and follow the planned flight route. In scenarios with complicated terrain, Phantom 4 RTK and DJI TERRATM can be used to plan flight routes and import routes to the DJI Agras app for operation. Refer to the Agras T30 User Manual for more information.
Field Planning
The DJI Agras app supports flight route planning by flying the aircraft to waypoints, obstacles, and calibration points or by walking to these points carrying a remote controller, a remote controller with an RTK dongle, or an RTK device. The following route has been planned by walking to the points with a remote controller that has a RTK dongle connected. Before planning, make sure that the RTK high precision positioning module is mounted to the remote controller.

Power on the remote controller.  Tap Plan Field, select Walk with RTK, and Walk with RTK Dongle. In RTK settings, select a method for receiving RTK signals and configure the corresponding settings. Make sure the aircraft status bar at the top of the screen is green.

Walk with the remote controller alongside the boundary of the operation area and tap Add Waypoint C2 at turning points. Walk to each obstacle in turn and tap Obstacle Mode C1. Walk around the obstacle and tap Add Obstacle C2 at several points around the obstacle.

Tap Waypoint C1 to return to add edge points to the operation area. Walk to the location of each calibration point and tap Calibration Point.The waypoints and flight route can be edited. Fine-tune waypoint positions, configure distance and line spacing, and adjust the route direction by tapping or dragging the icon .

• Any obstacles in or out of the operation area can be marked.Once you have finished planning, press the back button on the remote controller to return to the home screen.

The calibration points are used to offset the bias of the flight route caused by the positioning difference. Choose at least one existing landmark as the fixed reference point for calibration when executing the same operation. If none are available, use an easily identifiable object such as a metal stake.

Performing an Operation

Take the aircraft to one of the calibration points. Tap Execute Task in the home screen of the app. Tap and select the field from the field list. Tap Edit to edit the waypoints and flight route again.

Tap Use and tap Rectify Offset. Tap Start. Set operation parameters and confirm.  Set the auto-takeoff height and move the slider to take off. The aircraft will perform the operation automatically.

WARNING

• Only take off in open areas and set an appropriate auto-takeoff height according to the operating environment.
• An operation can be paused by moving the control stick slightly. The aircraft will hover and record the breakpoint. After which, the aircraft can be controlled manually. To continue the operation, select it again from the Executing tag in list. The aircraft will return to the breakpoint automatically and resume the operation. Pay attention to aircraft safety when returning to a breakpoint.
• In Route Operation mode, the aircraft is able to circumvent obstacles, which is disabled by default and can be enabled inthe app. If the function is enabled and the aircraft detects obstacles, the aircraft will slow down and circumvent the obstacles and return to the original flight path.
• Users can set the action the aircraft will perform after the operation is completed in the app.

More Operation Modes and Functions
Refer to the Agras T30 User Manual for more information about the A-B Route, Manual, and Manual Plus Operation modes and on how to use functions such as Smart Supply Reminder, Operation Resumption, System Data Protection, and Empty Tank.

Maintenance

Clean all parts of the aircraft and remote controller at the end of each day of spraying:

1. Fill the spray tank with clean water or soapy water and spray the water through the nozzles until the tank is empty. Repeat the step twice more.
2. Remove the spray tank strainer, nozzle strainers, and nozzles to clean them and clear any blockage. Afterwards, immerse them in clean water for 12 hours.
3. Use a water-filled washer with a max water pressure of XX MPa to clean the aircraft body and wipe it with a soft brush or wet cloth before cleaning water residue with a dry cloth.
4. If there is dust or pesticide liquid on the motors and propellers, wipe them with a wet cloth before cleaning water residue with a dry cloth.
5. Wipe the surface and screen of the remote controller with a clean wet cloth that has been wrung out with water. Refer to the disclaimer and safety guidelines for more information on product maintenance.

Specifications

Airframe
Max Diagonal Wheelbase| 2145 mm

Dimensions

| 2858×2685×790 mm (arms and propellers unfolded)

2030×1866×790 mm (arms unfolded and propellers folded)

| 1170×670×857 mm (arms and propellers folded)
---|---
Propulsion System
Motors
Stator Size| 100×18 mm
KV| 77 rpm/V
Max Thrust| 18.7 kg/rotor
Max Power| 3600 W/rotor
Weight| 756 g
ESCs
Max Working Current (Continuous)| 60 A
Max Working Voltage| 60.9 V (14S LiPo)
Foldable Propellers (R3820)
Diameter        Pitch| 38×20 in
Weight (Single propeller)| 106 g
Spraying System
Spray Tank
Volume| Fully loaded: 30 L
Operating Payload| Fully loaded: 30 kg
Nozzles
Model| XR11001VS (standard), XR110015VS (optional, purchase

separately), TX-VK4 (optional for Orchard Form, purchase separately)

Quantity| 16
Max Spray Rate| XR11001VS: 7.2 L/min, XR110015VS: 8 L/min, TX-VK4: 3.6 L/min
Spray Width| 4-9 m (12 nozzles, at a height of 1.5-3 m above crops)

Droplet Size

| XR11001VS: 130-250 μm, XR110015VS: 170-265 μm, TX-VK4: 110-

135 μm (subject to operating environment and spray rate)

Flow Meter
Measurement Range| 0.25-20 L/min
Error| < ±2%

Measurable Liquid

| Conductivity > 50 μS/cm (liquids such as tap water or pesticides that

contain water)

Omnidirectional Digital Radar
Model| RD2424R
Operating Frequency| SRRC/NCC/FCC: 24.05-24.25 GHz
| MIC/KCC/CE: 24.05-24.25 GHz
---|---
Power Consumption| 12 W
Transmission Power (EIRP)| SRRC: 13 dBm; NCC/MIC/KCC/CE/FCC: < 20 dBm
Altitude Detection & Terrain Follow[1]| Altitude detection range: 1-30 m Stabilization working range: 1.5-15 m

Max slope in Mountain mode: 35°

Obstacle Avoidance[1]| Obstacle sensing range: 1.5-30 m FOV: Horizontal: 360°, Vertical: ±15°

Working conditions: Flying higher than 1.5 m over the obstacle at a speed lower than 7 m/s

Safety limit distance: 2.5 m (distance between the front of propellers and the obstacle after braking)

Obstacle avoidance direction: Omnidirectional obstacle avoidance

in the horizontal direction.

IP Rating| IP67
Upward Radar
Model| RD2414U
Operating Frequency| SRRC/NCC/FCC: 24.05-24.25 GHz

MIC/KCC/CE: 24.05-24.25 GHz

Power Consumption| 4 W
Transmission Power (EIRP)| SRRC: 13 dBm; NCC/MIC/KCC/CE/FCC: < 20 dBm
Obstacle Avoidance[1]| Obstacle sensing range: 1.5-15 m FOV: 80°

Working conditions: Available during takeoff, landing, and ascending when an obstacle is more than 1.5 m above the aircraft. Safety limit distance: 2 m (distance between the highest point of the aircraft and the lowest point of the obstacle after braking)

Obstacle avoidance direction: Upward

IP Rating| IP67
FPV Cameras
FOV| Horizontal: 129°,Vertical: 82°
Resolution| 1280×720 15-30fps
FPV Spotlights| FOV: 120°,Max brightness: 13.2 lux at 5 m of direct light
Flight Parameters

Operating Frequency| SRRC/NCC/FCC/CE/MIC/KCC: 2.4000-2.4835 GHz

SRRC/NCC/FCC/CE: 5.725-5.850 GHz[2]

Transmission Power (EIRP)| 2.4 GHz

SRRC/CE/MIC/KCC: 18.5 dBm, FCC/NCC: 29.5 dBm

5.8 GHz

SRRC: 28.5 dBm, FCC: 20.5 dBm, CE: 12.5 dBm

Total Weight (exc. battery)| 26.7 kg
Max Takeoff Weight| 66.5 kg (at sea level)
Max Thrust-Weight Ratio| 1.70 (takeoff weight of 66.5 kg)
Hovering Accuracy Range (with strong GNSS signal)| D-RTK enabled: Horizontal: ±10 cm, Vertical: ±10 cm D-RTK disabled:

Horizontal: ±0.6 m, Vertical: ±0.3 m (Radar module enabled: ±0.1

m)

RTK/GNSS Operating Frequency| RTK: GPS L1/L2, GLONASS F1/F2, BeiDou B1/B2, Galileo E1/E5[3]

GNSS: GPS L1, GLONASS F1, Galileo E1[3]

Battery| DJI-approved flight battery (BAX501-29000mAh-51.8V)
Max Power Consumption| 11000 W
Hovering Power Consumption| 1000 W (takeoff weight of 66.5 kg)
Hovering Time[4]| 20.5 min (takeoff weight of 36.5 kg with an 29000 mAh battery)

7.8 min (takeoff weight of 66.5 kg with an 29000 mAh battery)

Max Tilt Angle| 15°
Max Operating Speed| 7 m/s
Max Flying Speed| 10 m/s (with strong GNSS signal)
Max Wind Resistance| 8 m/s
Max Service Ceiling Above Sea Level| 4500 m
Recommended                       Operating

Temperature

| < 93%
Recommended                       Operating

Temperature

| 0° to 40° C (32° to 104° F)
Remote Controller
Model| RM500-ENT
Screen| 5.5-in screen, 1920×1080, 1000 cd/m2, Android system
RAM| 4GB LPDDR4
---|---

ROM

| 32 GB + scalable storage; microSD cards supported; Max Capacity:

128 GB. UHS-I Speed Grade 3 rating required

Built-in Battery| 18650 Li-ion (5000 mAh @ 7.2 V)
GNSS| GPS+GLONASS
Power Consumption| 18 W
Operating Temperature| -10° to 40° C (14° to 104° F)
Charging Environment Temperature| 5° to 40° C (41° to 104° F)
Storage Temperature| -30° to 25° C (-22° to 77° F)
OcuSync 2.0
Operating Frequency| SRRC/NCC/FCC/CE/MIC/KCC: 2.4000-2.4835 GHz

SRRC/NCC/FCC/CE: 5.725-5.850 GHz[2]

Effective      Transmission    Distance

(Unobstructed, free of interference)

| SRRC: 5 km, FCC: 7 km, MIC/KCC/CE: 4 km
Transmission Power (EIRP)| 2.4 GHz

SRRC/CE/MIC/KCC: 18.5 dBm, FCC/NCC: 29.5 dBm

5.8 GHz

SRRC: 28.5 dBm, FCC: 20.5 dBm, CE: 12.5 dBm

Wi-Fi
Protocol| Wi-Fi Direct, Wi-Fi Display, 802.11a/g/n/ac

Wi-Fi with 2×2 MIMO

Operating Frequency| 2.4000-2.4835 GHz

5.150-5.250 GHz

5.725-5.850 GHz[2]

Transmission Power (EIRP)| 2.4 GHz

SRRC/CE: 18.5 dBm, NCC/FCC /MIC/KCC: 20.5 dBm

5.2 GHz

SRRC/NCC/FCC/CE/MIC/KCC: 14 dBm, KCC: 10 dBm

5.8 GHz

SRRC/NCC/FCC: 18 dBm, CE/KCC: 12 dBm

Bluetooth
Protocol| Bluetooth 4.2
Operating Frequency| 2.4000-2.4835 GHz
Transmission Power (EIRP)| SRRC/NCC/FCC/CE/MIC/KCC: 6.5 dBm
---|---
Remote Controller Intelligent Battery
Model| WB37-4920mAh-7.6V
Battery Type| 2S LiPo
Capacity| 4920 mAh
Voltage| 7.6 V
Energy| 37.39 Wh
Charging Environment Temperature| 5° to 40° C (41° to 104° F)
Intelligent Battery Charging Hub
Model| WCH2
Input Voltage| 17.3-26.2 V
Output Voltage and Current| 8.7 V, 6 A
Operating Temperature| 5° to 40° C (41° to 104° F)
AC Power Adapter
Model| A14-057N1A
Input Voltage| 100-240 V, 50/60 Hz
Output Voltage| 17.4 V
Rated Power| 57 W

1. The effective radar range varies depending on the material, position, shape, and other properties of the obstacle.
2. Local regulations in some countries prohibit the use of the 5.8 and 5.2 GHz frequencies. In some countries, the 5.2 GHz frequency band is only allowed for indoor use.
3. Support for Galileo will be available at a later date.
4. Hovering time acquired at sea level with wind speeds lower than 3 m/s.

FCC Compliance Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information
Aircraft
The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter.
Remote Controller
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.
ISED Compliance Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.
Aircraft
This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Remote Controller
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End-user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED.
These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is reported under this standard during product certification for use when properly worn on the body.

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
EU-Compliance: Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den wesentlichen Anforderungen und anderen einschlägigen Bestimmungen der EU- Richtlinie 2014/53/EU entspricht.
Eine Kopie der EU-Konformitätserklärung finden Sie online auf www.dji.com/euro-compliance

Environmentally-friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

References

• DJI - The World Leader in Camera Drones/Quadcopters for Aerial Photography
• Support - DJI
• DJI Agras T30-A New Digital Flagship for Agriculture
• DJI - The World Leader in Camera Drones/Quadcopters for Aerial Photography
• T30 - Downloads - DJI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>