pulsar PAW3370 Xlite Wireless Gaming Mouse Instructions
- June 6, 2024
- Pulsar
Table of Contents
PAW3370 Xlite Wireless Gaming Mouse
Instructions
Function layout
| 1 Left-click | 7 Scroll down |
|---|---|
| 2 Right-click | 8 Power off |
| 3 Middle click | 9 Power On |
| 4 Forward | 10 Wired and charging Type-C |
| 5 Backward | 11 Indicator |
| 6 Scroll up |
Instruction
Mouse instruction:
- Take out the wireless USB Nano receiver from the package
- Plug the receiver into your computer USB port
- Turn on the mouse power by switching the power switch on the bottom of the mouse
- Waiting for computer installation finished
DPI setting and indication:
- DPI level: 400-800-1600-3200,total 4 levels DPI
- Hold on button 1+3+4 for 3 seconds to change DPI circularly
- The indicator color will indicate the DPI level as below: 400DPI: cyan color breath. 800DPI(default):blue color breath.1600DPI: purple color breath. 3200DPI: white color breath.
Note:
- DPI can be set by software, MAX DPI is 20000dpi
- DPI led effects can be set by software and can turn off the DPI led to save power
Polling rate:
125-250-500-1000Hz can be set by software, default polling rate is 1000Hz
Wired and wireless function:
- Wired and wireless mode switch automatically, when you plug the receiver into the computer without a cable connection, it will work as wireless mode.
- If you connect the cable from the computer to the mouse, it will switch to wired mode automatically and work as wired mode.
Low power and charging indication
- Low power indication: when mouse battery power is low( less than 3.5V), the Red color in the wheel will flash, so you need charge when the Red color flash in the wheel
- During charging the yellow color led in the wheel will flash, after the battery charging full, the LED color will become green and charging stop automatically, and wheel led color will back to DPI indication
Pairing
- If your mouse loses connection, you can re-pairing it as below process: Hold on left click+middle click+right click for 3 seconds until the yellow color flash in the wheel,
- release all buttons, put the mouse close to the receiver, and re-plug the receiver. the LED will stop flashing after the pairing is finished.
Note: If you need to customize the function, pls download the software from the website
CAUTION
- Keep the battery dry.
- Avoid locating the battery terminals near metallic objects.
- Do not short-circuit and avoid metallic or water coming into a mouse to cause battery short
- Use computer USB and specified cable to charge the mouse.
Main Specification
| Size: | 120×63.5x39mm |
|---|---|
| Weight: | 73g |
| Switch | Omron 20M(OF) |
| Sensor | PAW3370 |
| Max DPI | 20000 |
| Default DPI: | 400-800-1600-3200DPI |
| IPS | 400ips |
| Acceleration | 50g(Max) |
| Polling rate | 125-250-500(default)-1000Hz |
| Interface | USB 2.0 |
| Battery type | Li-ion Polymer Battery |
| Battery capacity | 300mAh |
Read User Manual Online (PDF format)
Loading......