Zhejiang Balma Lock T1006 Fingerprint Padlock User Manual
- June 5, 2024
- Zhejiang Balma Lock
Table of Contents
Fingerprint Padlock
User Manual
(TT LOCK APP)
1.2 Product Technical Parameters
Funtion:TT LOCK APP
Matching products: padlock traffic lock, U-shaped glass lock, drawer
lock, cabinet lock
Battery: Lithium battery
Fingerprint capacity:20pcs
Fingerprint reading speed≤0.5 Seconds
working temperature:-10℃-45℃
Working humidity:40%RH-90%RH
USB Charging:5v, Micro USB Interface
Before you do the following, make sure your phone’s Bluetooth is turned on
and your phone and padlock are within a reasonable distance. It is recommended
to operate within 5 meters.
1. Connect the APP
Search for “TT LOCK” APP in the application market and download it. Open the
APP.
1.1 Click the “三” icon in the upper right corner of the app home page and
click the”+” icon to add lock.
1.2 Find the type of lock and click.
1.3 Meanwhile, place your finger on the padlock fingerprint area and turn on
Bluetooth
1.4 Enter the Bluetooth search interface, wait a few seconds, the device name
appears, and click “OK” to connect.
1.5 Prompt connection success
1.6 Bluetooth unlock, click the unlock button on the device interface to
unlock.
Fingerprint management
In the initial state, the device has no fingerprint information. Any finger can unlock.After adding APP, using a fingerprint requires a mobile phone operator to add .
2.1 Add fingerprint settings
Enter the device management interface and click Fingerprint picture-,click in
the upper right corner “ ”-click add fingerprint-name fingerprint- setting
time effective.Place your finger on the fingerprint area to start fingerprint
recognition according to the APP prompt. The sampling is successful, the blue
light is on, the red light is faulty, and the continuous sampling is
successful 6 times, indicating that the entry is successful.
After entering the fingerprint successfully, you can unlock it with the
corresponding fingerprint. The green light is on and the buzzer sounds when
unlocking is successful. Failure lights up red.
2.2 Delete fingerprint information
Open the app, click the corresponding device on the homepage, enter the
management interface, click fingerprint picture and click the fingerprint name
to be deleted.
After adding a lock successfully,the lock administrator will have the highest
management authority of the lock.
He can send the key to others and specify the time limit, select the time
limit permanent or single Bluetooth key permission .
You can query the unlocking record.
3. Fingerprint lock charging instructions
3.1 When charging, the red light is on; when fully charged, it lights up in
green.
3.2 Low voltage alarm After unlocking operation, if the battery voltage is
lower than 3.6V. The low voltage alarm time is about 5 s, the red light
flashes once per second, and the buzzer sounds. 3.3 Low voltage protection:
When the battery voltage is lower than 3.2 V, it will enter a low-voltage
protection state. No matter if you touch the fingerprint or the button, there
will be no response. Now you need to plug in a USB to charge to restore the
normal working status.
4. Product initialization
4.1 Open the app, enter the unlock interface,click Settings, and enter the
next interface。
4.2 Click delete in the red bar in the bottom, click delete on the pop-up
interface,enter the password when adding the app., and press ok,
initialization is successful.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>