Zhejiang Balma Lock T55C TUYA Intelligent Lock Cylinder User Manual
- June 3, 2024
- Zhejiang Balma Lock
Table of Contents
- Product settings
- APP connection
- IC card management
- Password Management
- Member Management
- Restore Initial Settings
- Open the lock operation
- Open the lock record query
- Low battery alarm
- Enter the wrong passwords/IC cards
- Background lights off
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Zhejiang Balma Lock T55C TUYA Intelligent Lock Cylinder
Model : T55C TUYA
App+ Password+ ICcard + Emergency micro magnetic induction key
Part 1: Introduction to product parameters Name: Smart U lock
Model : T55 Tuya
Unlock method: passwords, IC cards, keys, App
Virtual passwords : adding numbers before and after the correct passwords
for a total length of 16 digits can also open the lock.
Operating temperature : -20°C-?0°C
Power supply: 1 xCR2 battery
Product settings
Instructions for use
Please make sure that the Bluetooth on mobile phone is turned on before taking any step by following operations. Be sure the mobile phone and the lock are within a reasonable distance. It is recommended to operate within 5 meters.
APP connection
Search for Tuya app in the app market and download it. Open the app and follow the prompts to connect. Click+ icon in the upper right corner of the homepage.
- Manually add: Select Camera/lock -Lock (Bluetooth). Press the key on the device to turn on the device side Bluetooth , after waiting for a few seconds, the device name will appear and click Connect.
- Automatic discovery: Click on the “automatic discovery” above, to ensure that the lock has been powered up, Press the key on the device to turn on the Bluetooth of device, wait a few seconds, the device name appears, click on the connection.
IC card management
Clicking the device icon enter the management interface, selecting add IC card on setting page, the app broadcasts please swipe card when it is ready to register IC cards. After the IC card is recognized, the app will broadcast adding successfully.
Password Management
- Add password: Clicking the device icon enter the management interface, selecting add passwords on setting page. Click Settings Password Management, then click+ icon on the upper right corner to add passwords, select the user, en1ter the password and nickname according to the prompt on the page, select Save in the upper right corner, then the password will be added successfully.
- Delete password: Clicking the device icon enter the management interface, selecting add passwords on setting page. Click Settings Password Management, then select the icon on the right to delete.
Member Management
-
Member management page – there are two different members.
-
Family members – These members are consistent with the users of the family group in the app; when a new user is added to the family group in app, the user will also be added in the members in device page. In the same way, if a member is added to the family member of the device, the member will also appear in the family group of the app.
Note : Deleting a family member can only be done in the family member management in the app main system. -
Other members – refers to users who appear only in the lock, not users of the app family group. Adding and deleting users will not affect the members of the app family group.
-
member management – other member management
-
Validity time: the administrator can decide the period of unlock for other members. It can be set to be permanent or set to the specified start time and end time
-
open the lock. The administrator can determine the type of permission that the member has to open the lock; if the administrator cancels all the opening methods of the member, the user can no longer open the lock opening mode through the app, only registered lock opening methods is allowed.
-
After creating another new member, the administrator can associate the member with a user of the app through the Share operation. At the specified end time of the user, the device will be automatically removed from the device list of the new user.
Restore Initial Settings
Entering the device page, click the icon in the upper right corner, enter the device information interface, pull down to find and click the restore initial settings.
- When the mobile phone app and the lock are connected by Bluetooth, use restore initial settings in device page. All the lock opening methods of the lock will be deleted, the lock will be restored to the default status, and other users can re-add the lock through the app.
- When the mobile phone is not in Bluetooth connection with the lock, the lock is restored to the initial setting on the local settings of the lock.
Open the lock operation
Use fingerprints or press any key on the keyboard to wake up the device, enter
the password+ , after verifying the password, the lock will be open, the voice
broadcast lock can be opened, after the lock opening, the lock will be closed
automatically and the device will broadcast lock closed.
Open the APP homepage, select the device, enter the management interface ,
hold to un Io ck.
Open the APP homepage, select the device, enter the management interface,
slide page to left to switch to the “Dynamic Password” interface, click to
generate a dynamic password, it is valid within 5 minutes after the dynamic
password is generated. Enter the 8-digit number+ , and the unlock is
successful.
Open the lock record query
Open the APP home page, select the device to enter the management interface, click “Open the lock record” below to view the opening record.
Low battery alarm
Voice prompt below 2. 7v: Please replace the battery if the battery power is low
Enter the wrong passwords/IC cards
Enter failure unlock for 5 times in succession. The lock will be lockout and cannot be operated for half minute.
Background lights off
The light will be on after any button is pressed; the light will be lasted for
1 O seconds without any operation.
Press the Back button twice on the lock to exit the system and the light will
be turned off.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.