auna US-10032056 Roadie Sing CD Boombox User Manual

June 5, 2024
Auna

Roadie Singx
CD Boombox
US-10032056 US- 10032057 US-10032058

www.auna-multimedia.com

ICH BIN EIN BERLINER

  • John F. Kennedy on June 26, 1963, in his speech in Berlin, on the occasion of the 15th anniversary of the Berlin Airlift.

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints on installation and use to avoid technical damages. Any failure caused by ignoring the items and cautions mentioned in the operation and installation instructions is not covered by our warranty and any liability.

SPECIFICATIONS

Item number| US-10032056
US-10032057,
US-10032058
---|---
Power supply
Power supply
Batteries| 120 V / 60 Hz
6 x 1.5 V ⎓ (Type C)
CD Player
Supported audio format| MP3 (MPEG 1 Audio Layer-3)
FM Radio
Tuning range| 87.5 MHz – 108 MHz
Input| AUDIO IN Stereo mini-jack
Output| Stereo mini-jack For 16 ohm – 32 ohm impedance headphones

Made in China
Berlin Brands Group Inc.
101 Montgomery Street, Suite 2050 in San Francisco, CA 94104
www.berlin-brands-group.com

WARNING

****|

CAUTION

| ****
---|---|---

THE RISK OF ELECTRIC SHOCK DOES NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
**| Triangle with lightning plus explanation as follows:
DANGEROUS VOLTAGE : The lightning flash with the arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
---|---
**
| Triangle with exclamation point plus an explanation as follows:
ATTENTION: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product.

CAUTION
To reduce the risk of electric shock do not use this plug with an extension cord, receptacle, or another outlet.

Ventilation Warning: Do not block any ventilation openings by situating the product on a bed, sofa, or similar surface that may block the ventilation openings; or place it in built-in installation. The product should be situated so that its location or position does not interfere with its proper ventilation.

FCC Warning : This equipment may generate or use radiofrequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

This device has been tested and found to comply with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) the device may not cause harmful interference and (2) the device must accept any interference received, including interference that may cause undesired operation. These FCC rules are designed to provide reasonable protection against harmful interference in a residential installation.

PRODUCT COMPLIES WITH DHHS RULES 21 CFR Chapter I, SUBCHAPTER J

DANGER
Invisible laser radiation can cause serious personal injury when open and if the interlock fails or is defeated! Avoid direct exposure to the beam. Use of controls or adjustments other than that specified herein may result in hazardous radiation exposure and serious personal injury.

WARRANTY

Berlin Brands Group (the “Company”) warrants to the original retail purchaser of this Product that should this Product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within twelve (12) months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned Product (at the sole discretion of the Company) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the Product  is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the  address provided herein

This warranty, as set forth above, may be extended for an additional six (6) months for a total warranty period of up to eighteen (18) months by registering the Product with the Company. In order to register the Product, the original retail purchaser must complete and return the registration documents provided along with the Product to the Company or register online at www.auna-multimedia.com/warranty within ninety (90) days of the original purchase.

This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THE PRODUCT.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES OR LIABILITIES. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 18 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.

SAFETY INSTRUCTIONS

FAILURE TO CAREFULLY FOLLOW THESE INSTRUCTIONS MAY LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO YOUR PRODUCT.

General Instructions

  • DANGER. NOT FOR USE BY CHILDREN UNDER THE AGE OF 18.
  • For home and personal use only. Any other usage shall be construed as a misuse as set forth herein.
  • For indoor use only. Outside usage shall be construed as a misuse as set forth herein.
  • Read, keep and follow the instructions carefully.
  • Heed all warnings.
  • Electrical equipment should never be kept or stored in rain or damp environments. Storage of the Product under the aforementioned conditions shall be construed as neglect as set forth herein
  • Unplug the product during lightning storms or when unused for a long period of time. Any actions to the contrary shall be construed as neglect as set forth herein.
  • When servicing only use identical replacement parts, as specified by  the manufacturer. Usage of any other parts shall be construed as an alteration as set forth herein.
  • Do not expose to direct sunlight and do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produces heat. Conducting any of the foregoing shall be construed as a misuse as set forth herein.
  • Before first use clean the Product. Failure to clean the Product prior to its  initial usage shall be construed as neglect as set forth herein.
  • DO NOT PLUG IN THE PRODUCT UNLESS IT IS TURNED OFF COMPLETELY.
  • DO NOT STORE FOOD OR LIQUIDS IN THE PRODUCT.
  • Do NOT expose yourself to dripping or splashing water. Do NOT place objects on top of the product. Conducting any of the foregoing shall be construed as a misuse as set forth herein.

Special Instructions

This manual is intended to familiarize you with the operation of this device.
Keep this manual in a safe place for future reference.

  • Please use the device only in its intended way. Any other use may result in damage to the device or items in the vicinity of the device.
  • Modifying or altering the device will compromise device safety.
  • Caution: danger of injury. Never open the device without authorization. Never attempt to perform any repairs yourself.
  • Handle the device carefully. It can be damaged by bumps, impacts, or falls from low heights.
  • Do not drop metal objects into this device.
  • Do not place heavy objects on this device.
  • Clean only with a dry cloth.
  • Do not block the ventilation openings.
  • Use only accessories recommended by the manufacturer or a specialist dealer.

Small objects/packaging parts (plastic bags, cardboard, etc.)

Keep small objects (for example, screws and other assembly materials, memory cards) and packaging parts out of reach of children so that they cannot be swallowed. Do not let small children play with plastic bags. Risk of suffocation.

Transporting the device
Please keep the original packaging. To ensure adequate protection when transporting the device, pack the device in its original packaging.

Cleaning the outer surfaces
Do not use volatile fluids, such as insect sprays. The surface can be  damaged by excessive pressure during wiping. Rubber or plastic parts should not be left in contact with the device for an extended period of time. Use a dry cloth.

PRODUCT OVERVIEW

auna US-10032056 Roadie Sing CD Boombox - OVERVIEW

1 Function switch (OFF/FM/CD/
USB/AUX BT)
2 Volume control knob
3 Play mode button
4 MP3 folder button
5 Play/Pause button
USB function button
6 Stop Button, PAIR button
7 Skip/Search backward button
8 Skip/Search forward button
9 CD doors open
10 Tuning control knob
11 Light ON/OFF switch| 12 Left speaker
13 USB jack
14 MIC IN jack
15 Mic volume control
16 LCD display
17 Right speaker
18 Telescopic antenna
19 AUX jack
20 Headphone jack
21 Carrying handle
22 Power port
23 Battery compartment door
---|---

POWER SOURCES

This unit operates on AC 120V~ 60 Hz or 6 X DC 1.5 V “C” (UM-2) batteries.
Do not attempt to operate the radio on any other power source. You could cause damage to the unit and void your warranty. Please be sure the power outlet you plug this unit into is working and receives constant (unswitched) power.

A. BATTERY OPERATION

  1. Remove the Battery Door.
  2. Install 6 x DC1.5V “C” (UM-2) batteries (not included) according to the polarity diagram inside the battery compartment. IMPORTANT: Be sure that the batteries are installed correctly. The wrong polarity may damage the unit.
  3. Close the Battery Door.

Note: For best performance, alkaline-type batteries are recommended.

BATTERY NOTES AND CARE

  • Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type
  • Do not mix old and new batteries.
  • Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty.

  • Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions).
  • Do not dispose of batteries in fire, batteries may leak or explode.

BATTERY REPLACEMENT

When the output sound of this unit becomes distorted or the CD player operation seems to be unstable, the batteries may be weak. You need to replace all of the exhausted batteries at the same time as soon as possible to avoid battery leakage.

B. AC OPERATION

  1. Plug the detachable AC cord A into a standard AC outlet (120V~60Hz).
  2. When the AC power cord (included) is connected to the AC Power Socket on the back of the unit and the other end is plugged into a 120V AC~ 60Hz wall outlet, the unit will discontinue battery operation automatically, and operate on AC Power only.
  3. Slide the FUNCTION SWITCH to “CD/USB” for CD or USB play, “FM” for FM radio, “BT/AUX” for BT or AUX play and “OFF” to turn off  the unit.

auna US-10032056 Roadie Sing CD Boombox - AUX play

RADIO OPERATION

  1. Slide the FUNCTION SWITCH to “FM ST.” as desired.
  2. Rotate the TUNING CONTROL KNOB to your desired radio station according to the DIAL SCALE on the knob.
  3. Rotate the VOLUME CONTROL KNOB to adjust to the desired output level.
  4. To turn off  the radio, slide the FUNCTION SWITCH to the “OFF” position.

TIPS FOR BEST RECEPTION

FM – If a stereo broadcast program is being received, during FM or FM Stereo reception, always keep the FM TELESCOPIC ANTENNA fully extended for best performance. However, if FM reception is weak, try repositioning the unit near an open window until you get the best reception.

CD OPERATION

PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to read all commercial CDs. It will also read self-compiled MP3, CD-R/CD-RW discs, but it may take up to 10 seconds for the actual playback to begin. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or the compatibility of the CD compilation software. The manufacturer is not responsible for the playback quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.

PLAY MODE

  1. Slide the FUNCTION SWITCH to the “CD/USB” position. The LCD DISPLAY will light.
  2. Open the CD DOOR, load a CD with the label side facing upward and then close the CD door. A few seconds later the total number of tracks on the CD will appear on the LCD display. Press the PLAY/PAUSE  BUTTON to start playing the CD from the first  track. The PLAY/PAUSE PLAY ( ) icon will be displayed.
  3. While playing, press the BUTTON once to pause, the unit will go to pause mode and the PLAY () icon and a number of tracks will be flashing.
  4. Adjust the VOLUME CONTROL to the desired volume level.
  5. Press STOP () BUTTON to stop playing.
  6. To turn off the CD player, slide the FUNCTION SWITCH to the “OFF” position.  The LCD DISPLAY will go off.

NOTE: If skipping occurs during CD play, try turning the volume down. Do not open the CD DOOR when a CD is playing.

FOLDER MODE (CD/MP3/USB)

  1. If the FOLDER buttons is pressed quickly during PLAYBACK/PAUSE/ STOP mode, it will go to the next folder and display the folder number.
  2. If the FOLDER buttons is pressed and held during PLAYBACK/PAUSE/ STOP mode, it will go to the next 10 tracks and display the tracking number.

REPEAT MODE (REPEAT/REPEAT ALL/REPEAT OFF)

  1. Press the “PLAY MODE” button one time during playback or pause mode, will be displayed with flashing, and the current single track will be repeated.

  2. Press the “PLAY MODE” button two times during playback or pause mode, will be displayed, and the current folder will be repeated.

  3. Press the “PLAY MODE” button three times during playback or pause mode,  will be displayed without flashing, and all tracks will be  repeated.

  4. Press the “PLAY MODE” button four times during playback or pause mode, and will be displayed, repeating canceled.

PROGRAM MODE (CD/MP3/USB)

Up to 20(CD),/99(MP3) tracks can be programmed for disc playback in any order.

  1. Press the “PLAY MODE” button quickly during stop mode. The LCD display will show P01 and flash.

  2. Select the desired track by using the “SKIP-/SKIP+” buttons.

  3. Press the “PLAY MODE” button to enter the track into the setting.

  4. LCD display changes P02.

  5. Repeat steps 2~4, for up to 20(CD)/99 (MP3, WMA) tracks,  the display will show FUL when the programmed tracks arrive at 20(CD)/99(MP3, WMA).

Note

  1. To complete programming and start playback, quickly press the “PLAY/ PAUSE” button. Program playback starts automatically.
  2. To terminate programming, quickly press the “STOP” button twice to cancel the program mode.

USB SLOT OPERATION

With no compact disc in the CD compartment.

  1. Slide the “FUNCTION” switch to CD/USB position.
  2. Insert a USB drive to the USB port
  3. The operation of PLAY/PAUSE, STOP, SKIP-, SKIP+, REPEAT and PROGRAM is the same as CD/MP3.
  4. Press and hold the  button changing USB mode.

With a compact disc in the CD compartment.

  1. Slide the “FUNCTION” switch to CD/USB position.
  2. Insert a USB drive to the USB port
  3. Press and hold the “PLAY/PAUSE” button to change from CD to USB mode.
    The operation of PLAY/PAUSE, STOP, SKIP-, SKIP+, REPEAT, and PROGRAM is the same as CD/MP3.

AUX IN OPERATION

This CD player features an AUX-IN jack for connecting your iPod, MP3 player, or another digital music player.

  1. Connect the headphone jack of your external device to the AUX IN jack located on the back of this CD player (The connection cable is not included).
  2. Turn on the CD player and slide the FUNCTION switch to the AUX/BT position. The unit will enter the AUX function mode once an external device is plugged into the AUX IN jack.
  3. Start to play your iPod, MP3 player or another external audio device.
  4. Slowly adjust the volume controls on your CD player and the external device.
  5. Turn off your iPod, MP3 player and etc. when finish listening. Turn the CD  player off and unplug the AUX IN jack. Remark: Once the AUX IN jack is plugged in, the BT/AUX player will automatically enter the AUX mode when the FUNCTION switch is in BT/AUX mode. Remember to disconnect the cable from the unit after use in order to be able to listen to the BT mode again.

BT OPERATION

Slide the “FUNCTION” switch to AUX/BT position. to turn ON the unit and follow the directions below to connect via BT. (disconnect the AUX-IN cable).
PAIRING (Linking) a BT-enabled cell phone or another BT-enabled device to the Roadie
If the Roadie has never been paired with a BT device before. You need to follow the pairing instructions below to link the Roadie with your BT device.

  1. Slide the FUNCTION switch to the AUX/BT position.

  2. BT “bt” message will appear and flash in the display.

  3. If the Roadie has never been paired with a BT device before or cannot find the last paired device, the “bt” will flash in the display to indicate  that the Roadie is in search mode. Follow the pairing instructions below to link the Roadie with your BT device.
    • Turn on the BT function of your BT device and enable the search or scan function to find the Roadie
    • Select ” Roadie ” from the device list when it appears on your device screen. If required, enter the passcode “0000” to pair (link) the Roadie with your device.

  4. After successfully pairing (linking), the display will change to show “bt” steadily, and the BT icon also will show in the display. You can begin playing music from your BT device wirelessly to the speaker.

  5. After selecting your favorite song, press the PLAY/PAUSE button on the unit to play or pause the song.

  6. Adjust the VOLUME CONTROL to the desired volume level.

  7. Press the  or  button on the main unit to skip to the previous or next song.

  8. If you want to pair the Roadie with another BT-enabled device, press and hold the PAIR button for 3 seconds or turn off the BT function of the  device currently paired with the Roadie then repeat step 3 above.

Notes:

  1. Refer to the manual of your cell phone, tablet PC, computer, or other BT-enabled devices for BT operation since it may vary from model to model.
  2. If your BT-enabled device does not support the A2DP profile, it will not  play the music through the speaker, even if paired (linked).
  3. If you are pairing (linking) your computer to the unit using BT, you may need to set the speaker as your computer’s default sound device.

LED LIGHT SHOWS

  • The LED light shown inside the speaker and around the center display of the unit are created automatically based on the music source being played at the time
  • To turn on the LED light show, slide the LIGHT switch to the ON position.
  • To turn off the LED light show, slide the LIGHT switch to the OFF  position.

Note: If the brightness is glaring, turn on the room lights or turn off the LED light show.

MIC IN (KARAOKE)

The unit provides a feature of mixing the microphone input with the sound being played. The MIC IN jack is located at the unit front panel.

  1. Plugin the microphone into the Mic In jack.
  2. Adjust the microphone volume by turning the MIC VOLUME CONTROL located at the front panel.

Note: When no microphone is connected, it is better to adjust the microphone volume to a minimum.

CARE AND MAINTENANCE

  1. Children should be supervised when using this device.
  2. Never wrap the headphone cable around any animal or person. Special care should be taken with long wires.
  3. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
  4. Avoid leaving your unit in direct sunlight or in hot, humid, or dusty places.
  5. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.
  6. If dropouts or interruptions occur in the music during CD play, or if the CD fails to play at all, its bottom surface may require cleaning. Before playing, wipe the disc from the center outwards with a good soft cleaning cloth.

TROUBLESHOOTING

Symptom| Possible Cause|

Solution

---|---|---
Noise or sound distorted on FM broadcast.| –  Station not tuned properly for FM.
–  FM telescopic antenna is not extended.| –  Retune the FM broadcast station.
–  FM: Extend FM telescopic antenna
CD player will not play| –  Unit not in CD function mode.
–  If the CD is self-compiled, the media used may not be compatible with the player.
–  Exhausted battery.| –  Select CD function mode.
–  Load CD with the label side up.
–  Use better quality blank media and retest.
–  Replace all old batteries.
CD skips while playing| – Disc is dirty or scratched.| – Wipe CD with a clean cloth or use another disc.
Intermittent sound from the CD player| -Dirty or defective disc
–  Dirty pickup lens
–  Player is subject to excessive shock or vibration| –  Clean or replace the defective disc.
–  Use a CD lens cleaning disc to clean the lens.
–  Relocate the player away from shock or vibration.
BT: no sound| –   Bluetooth speaker is not linked with the cell phone
–   Speaker placement out of range
–  Unit not in BT function mode.| – Go through the “BT Operations” process to link the speakers.
-Relocate the speaker within BT operating range
-Unplug cable plugged in AUX IN jack
Sound is distorted at high volume setting| -Volume control is set to maximum.
– Batteries are low.| Adjust Volume Control to a lower comfortable level.
– Replace all the old batteries with new ones.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals