Shenzhen General Technology X09 Smart PTZ Camera Instruction Manual
- June 5, 2024
- Shenzhen General Technology
Table of Contents
Shenzhen General Technology X09 Smart PTZ Camera
Product appearance
Install the camera
- Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network.
- Install the bracket Fix the camera to a desired location. You can directly place the camera on a flat surface, or fix the bracket to the wall or ceiling by screws, and then screw the camera to the fixed base.
Download and install the App
The camera supports Android and iOS App. For your best experience, please scan the QR code below, and follow the instruction to complett the user registration.
Set up the camera
Click the “Add Camera Now”in the App and enter the Wi-Fi network name and password that you want the camera to connect. Target the camera at the QR code of the mobile App, with a distance of about 20cm(about 7 inches) until the camera emits a “Di” sound, which represents the scanning is succeeded and the pairing is started.
Unbinding Device
Click the “Add Camera Now”in the App and enter the Wi-Fi network name and password that you want the camera to connect. Target the camera at the QR code of the mobile App, with a distance of about 20cm(about 7 inches) until the camera emits a “Di” sound, which represents the scanning is succeeded and the pairing is started.
Share the camera
- Find the camera you want to share on the App homepage or camera setting page. Click the share button and enter the sharing page.
- Click “Invite”, and a QR code will be generated for sharing.
- For the members you need to share, find “Add Friend’s Camera” on the “User” page to enter the scanning page.
- Scan the QR code on your mobile phone, and you will receive the confirmation notification after success. The sharing will be completed after you agree.
Packing list
- Camera*1
- Bracket*1
- Power cable*1
- Power adapter*1
- Mounting kit*l
- Operation instruction*1
Product specification
Regulatory Compliance
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct theinterference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
LVD/EMC Directive: This product complies with the European Low Voltage
Directive 2014/35/EU and EMC Directive 2014/30/EU.
WEEE Directive-2012/19/EU: The product this manual refers to is covered by the Waste Electrical &Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner.