Shenzhen General Technology GS-X03 2.4G Wi-Fi Camera User Guide
- June 5, 2024
- Shenzhen General Technology
Table of Contents
Shenzhen General Technology GS-X03 2.4G Wi-Fi Camera
Please read this user’s guide carefully before using the product and keep it properly The screen displays and illustrations in this user’s guide are examples only, please refer to the actual product
Product Use
Turn on the Device
Plug the power cable into the Micro-USB power jack on the back of the camera
and wait a few seconds for the camera to automatically turn on.
Voice prompt at power-on: The system is starting up, please wait. If there is
no voice reminder, please restore the factory settings and try again.
Note: Do not twist the head of the camera to force it to rotate after turning
it on. If you need to adjust the monitoring orientation, you can adjust it
through the PTZ function of the mobile APP.
Restore the Factory Settings
Insert the reset pin* into the reset hole and press for 5 seconds to restore
the factory settings. (This operation will retain the contents of the MicroSD
memory card).
Quick Setup for Wi-Fi Camera Mode
Download APP
Account registration and login: users can register and log in via mobile phone
number (currently only for Chinese mainland phone number), email (please use
real email to retrieve password later), or log in with WeChat or QQ.
Note: Please be sure to use your account to log in the APP, otherwise
some device functions may not work properly.
Add Device
Method 1：QR Code
Open the P6SLite APP, click ‘+’ in the upper right corner of the home page,
select ‘Add Wi-Fi Device’, click ‘Next’, select ‘Please use the scan code
distribution network to connect the router’, follow the page prompts for
follow-up operations, and wait for the device to successfully connect to the
network.
Method 2：AP Hotspot
Same as Method 1，select ‘Add Wi-Fi Device’, click ‘Next’, select ‘Please use
the AP hotspot distribution network’, select the device hotspot, follow the
page prompts for follow-up operations, and wait for the device to successfully
connect to the network.
View in Real Time
Open the P6SLite APP, select the connected 2.4G WIFI Camera on the home page,
and you can browse in real time. Through the camera’s control interface, you
can adjust the camera’s sharpness, horizontal and vertical angles, as well as
screen capture and recording, and remote calls operation, etc.
Video Playback
The 2.4G WIFI Camera can only use the historical video playback function after
installing a MicroSD memory card. After the MicroSD memory card is installed
and turned on, the camera will automatically start recording video.
In the 2.4G WIFI Camera control interface, click the button ‘Playback’ to
enter the historical video playback interface. You can drag the timeline to
select the time period to be played back, or you can use the button ‘Date’ to
select historical videos on different dates.
AI Human Tracking Intelligent Automatic Care
Turn on the AI ‘Human Tracking’ mode. When human beings appear on the screen,
the device will automatically capture pictures, record videos, and push alarm
messages to the user’s mobile phone in conjunction.
Note: The linkage push function needs to be turned on (P6SLite APP home
page → device preview list →2.4G WIFI Camera preview → turn on ‘Arm/Disarm’ in
the lower left corner).
Setting Method
- Open the P6SLite APP, enter the ‘Settings’ function page of the 2.4G WIFI Camera on the homepage, select the ‘Human Tracking’ function and turn on ‘Human Tracking Detection’;
- Select the required trigger actions, such as SD Card Snapshot, SD Card Record, Push Notification, Alarm Sound, etc.; you can set up ‘Armed all day’ or ‘Custom arming’, you can set Sensitivity, Detection area, etc.;
- On the device preview interface, you can use the shortcut buttons to turn off the ‘Human Tracking’ function. In addition, if you only need to detect human without tracking people, you can turn off the ‘Human Tracking’ function in the ‘Human Tracking’ function list.
Video Share
Open the P6SLite APP, click the ‘···’ button on the top right corner of the
2.4G WIFI Camera device preview on the homepage, and select ‘Sharing
management’ to enter the sharing settings and invite others to watch. The
person being shared needs to download the P6SLite APP, register an account and
log in to view.
Quick Setup for USB Webcam Mode
Installation Method
The 2.4G WIFI Camera can be placed on a flat surface such as a desk, dining
table, coffee table, cabinet top, etc., wherever you want to make a video
calling or live chat.
Video Calling
Designed for the way you like to make a video call, place the 2.4G WIFI Camera
where you want it and then connect the camera to a computer USB port. The
Windows® UVC or Mac drivers are loaded automatically. Driver installation may
take a few moments. The Webcam does not ship with video calling software. To
make a video call, use the video calling application you prefer.
Precautions
The proper environment temperature for this device range from -10℃ to
50℃.Please avoid exposing it to too much hotter or colder environment.
Please do not use this camera in somewhere moist or highly risk of getting
water inside of it, thus to ensure this device of precise electronics a long
service life.
For better using experience, please keep the front and both sides of the
camera lens away from objects reflective as glass, white wall etc. So that the
picture function well without overexposure.
Make sure the camera has been placed in areas of good reception of Wi-Fi
signal or at lease within the signal zone. Set it up away from somewhere might
jamming signal as metal or microwave oven.
Warranty Description
Our company will implement warranty for installation and use according to the
product guide.
Please send this warranty card together with the purchased product to after-
sales service department when maintenance is demanded.
Non-warranty Regulations
Unauthorized maintenance, misuse, collision, negligence, abuse, liquid
infusion, accident, alteration, incorrect use of non-product accessories, or
tearing stickers or anti-counterfeiting marks.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
.minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>