MEARI Bullet 6S Outdoor WiFi Camera User Guide
- June 5, 2024
- MEARI
Table of Contents
Bullet 6S Outdoor WiFi Camera
User Guide
What’s in the box
| | |
|
---|---|---|---|---
Bullets 65| power adapter| Scvrew package| Manual| Screwdriver
Description
| Power | DC12V±10% |
|---|---|
| Status light | The solid red light on the camera is turning on or malfunction |
Blinking red light: awaiting WiFi connection Solid blue light on the camera
runs correctly Blinking blue light: currently connecting
Microphone| Capture sound for your video
SD card slot| Support local SD Card storage (Max.128G)
Reset| Press and hold for 5 seconds to reset the camera (if you have modified
settings, they will return to factory defaults)
Install
- Fix the Camera to the wall with screws
Adjust camera angle to a correct view (as shown in the picture)
Connect
Download
SmartLife is available for both iOS and Android OS. Search the name ‘Smart
Life’, in App Store or Google Play, or scan the QR-Code to download the App.
Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is
connected to the WiFi network.Please set the parameters of the router before
connecting the WiFi network, and record the SSID and password of your WiFi.
Connect
Registration process
Step 1 Open the Smart Life App, click “Register”, read the “Privacy Policy”
and click “Agree” .
Step 2 Input a legal and valid Mobile number or Email address and click
“Continue”. Input the Verification Code, then log in to the app.
QR Code Configuration
-
Open the Smart Life App, click “Create a family”, and you can customize the Family name and related settings.
-
Continue to click “Security & Sensor” » “Smart Camera”,and then choose”Add Device” or “+”,ready to add camera.
-
In “Add Device” this interface, continue to click “next step”, and then you should input your WiFi passwords.
Note:
- Camera only supports a 2.4GHz WiFi network.
- The number of bits in the SSID and passwords of the router should not exceed 24 digits.
-
In this interface, you should scan the QR code in your phone with the camera, when the camera comes out “dong dong dong”. And you can complete the configuration in about 30s.
-
When connecting, you should make sure your router, mobile, and camera are as close as possible. When the camera is added successfully, click ‘ ” you could also DIY the camera’s name.
Settings
In the “Smart Camera” interface, click “, and you can set the camera’s
common functions.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF card
can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App? A: Please confirm
that the App has been running on the phone, and the relevant reminder function
has been opened; Message notification and authority confirmation in the mobile
phone system has been opened.
Functions
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you push
notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage.
Daytime & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
FCC Statement:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator& your body.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>