hoco ES45 TWS Wireless Headset Instruction Manual
- June 5, 2024
- hoco
Table of Contents
hoco ES45 TWS Wireless Headset Instruction Manual
We are very glad that you purchase hoco wireless Headset!
We hope it brings you fun and enjoy!
Headset overview
How to use
- After opening the charging case, the headset automatically turned on, accompanied by the tone, the left and right headset automatically complete the pairing.
- Enable Wireless function on mobile phone, connect the “HOCO ES45”, at the first time you need to manually connect the device. Successful connection of “HOCO ES45” accompanied by a tone.
Headset Controls
Function
|
Operation
---|---
Play / Pause
| Click the touch area (left and right headset)
Next track|
Triple-click the right headset touch area
Prey song
| Triple-click the left headset touch area
Wake up “Sid”|
Long press the touch area 2S (lefUright headset)
Answer / hang up
| Click the touch area (left and right headset)
Reject|
Long press the touch area 2S (left/right headset)
Sound volume +
| Double-click the right headset touch area
Sound volume –|
Double-click the left headset touch area
Turn off
|
Put in the charging case and close the cover / Long press for 5 seconds I 3 minutes without pairing and automatically shut down
Product Features
- Wireless specification: Wireless V5.0
- Product net weight: 37g
- Protocols supported: Headset Hands-free A2DP AVRCP
- Transmission range: 10m
- Transmission frequency: 2.4GHz
- Charging voltage: DC 5V
- Headset charging time: About 1 hour
- Talk time/Music time: 3.5h
- Standby time: Above 180 hours
- Headset battery capacity: 30mAh
- Charging case battery capacity: 320mAh
Warning
- Do not expose the product to high temperatures, corrosive or high pressure environment.
- Do not attempt to disassemble the headset, or to replace any electronic components in it.
- If the internal devices have fluid leakage, please stop use.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>