hoco ES63 Wireless Headset Instruction Manual
- June 8, 2024
- hoco
Table of Contents
ES63 Wireless Headset
Instruction Manual
We are very glad that you purchase hoco wireless headset! We hope it brings you fun and enjoy!
Headset Overview
HOW TO USE
- Press and hold the touch area for 3 seconds to power on, the LED red and blue lights lash alternately.
- Turn on the BT function of your mobile device.
- Search for and select “HOCO ES63”.
Headset Controls
Function | Operation |
---|---|
Power on | Press and hold the touch area for 3 seconds |
Power off | Press and hold the touch area for 5 seconds |
Play/Pause | Click on the touch area |
Next track | Double click on the touch area |
Previous track | Triple click on the touch area |
Wake up “Siri” | Press and hold the touch area for 2 seconds |
Answer | Click on the touch area |
Hang up | Double click on the touch area |
Reject | Press and hold the touch area for 2 seconds |
Switch between Chinese and English | Double click the touch area in |
unpaired state
Product Features
- Wireless specification: Wireless V5.3
- Product net weight: 13g
- Protocols supported: Headset Hands—free A2DP AVRCP
- Transmission range: 10m
- Transmission frequency: 2.4GHz
- Charging voltage: DC 5V
- Charging time: about 1.5 hours
- Talk time/Music time: above 8 hours
- Standby time: above 120 hours
- Battery capacity: 90mAh
- Product size: 121 x 104 x 35 mm
Warning
- Do not expose the product to high temperatures, corrosive or high-pressure environment.
- Do not attempt to disassemble the headset, or to replace any electronic components in it.
- If the internal devices have fluid leakage, please stop use.
- Do not expose the battery (battery or combined battery) to excessive heat such as sunlight, fire or similar.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.