HOCO 2BDHT Intelligent Film Cutter User Manual

June 15, 2024
hoco

Intelligent Film Cutter
Manual

When turning on the film cutter, first put the pinch roller down and remove the protective film under the pinch roller

Product List

HOCO 2BDHT Intelligent Film Cutter - Product List

Appearance and function

HOCO 2BDHT Intelligent Film Cutter - function

  1. Carriage
    Control the lateral move of the carriage.

  2. Biade holder
    Cutting Film
    Seetl. 12. 13. 14.

  3. Pinch Roller Wheel
    Fix film Vertical move

  4. side panel
    Help to fx fim position and move direction

  5. Operation display
    Touch to control device operation

  6. Power Switch
    Start the device

  7. Pover nterface
    Gonnect power
    Integated handle Press

  8. Integrated handle press to control the lifing ofthe pinch roler

  9. Blade Holder Position
    Lock the blade holder

  10. Uss interface

  11. Automatc paper feed sensor

  12. LAN portinterface

HOCO 2BDHT Intelligent Film Cutter - Attention

Blade Level/ Cutting Pressure setting

Blade Holder
(Level)| Level:2-4| Level:4-5| Level:6-7| Level:7-8| Level:9-10
---|---|---|---|---|---
Cutting
Pressure| 200-250| 200-300| 300-400| 400-500| 500 .
Speed| 100-200| 100-200| 100| 50-100| 50
Material
(Thickness)
| Two Layers
Back Film
(0.1mm)| Two Layers
Back Film
(0.18mm)| Four Layers
Soft Film
(0.35mm)| Four Layers
Soft Film
Anti-explosion Film
(0.45mm)| Four Layers
Soft Film
Anti-explosion Film
(C.65mm)f

Instructions

  1. install the blade holderHOCO 2BDHT Intelligent Film Cutter - blade holder “Tips: The blade wil gradually become dullwhen use a ot which affects the: cutting quality itis recommended to replace it in time:

  2. Power connection, Starting up Please use AC 100-240V : connect the adapter and power cord, and connect the other end of the power cord to AC 100-240V; the adapter’s DC output line plug is connected to the input port of the film cutter; install the blade holder to make sure it s fixed atthe right position of the carriage head. After the connection and installation are completed, press the power button to start the device.

  3. screen film cutter machine operation
    When using it for the first time, click “Set Network” to complete the wifi connection, click *Mine” in the lower function bar, and find “Select Language” to complete the language settingHOCO 2BDHT Intelligent Film Cutter - machine
operation
    After the system starts normally, enter the homepageHOCO 2BDHT Intelligent
Film Cutter - homepageEnter keywords in the search box, search for the product model you need to cut, and select the corresponding model.

  4. Bluetooth connection
    Download the app with the OR code, and register an account afer entering the app
    • Enfr e prone umber, get e verfaton coce, and cik Next
    •  Tho deslrshe companycode, il your agstaton passwerd, and og. Log in to the app page, the app will prompt to turn on Bluetooth, enter the interface, click on the function bar “Mine” to enter the operating platform, click on “My device” to enter the link Bluetooth page.![HOCO 2BDHT Intelligent Film Cutter

  • Bluetooth connection3](https://manuals.plus/wp-content/uploads/2023/12/HOCO- 2BDHT-Intelligent-Film-Cutter-Bluetooth-connection3.png)

    1. Cutting film
      1.Please prepare a protective film to be cut as shown in the picture to ensure that the protective fim is flat and the film layer is compl ete without bending, folding or missing layers.HOCO 2BDHT Intelligent Film Cutter -
Cutting film2.Without automatic paper feeding:
      1. Press down the pressure bar to raise the pinch roller, put protective film in the dotted area.
      2. Raise the pressure bar to make the pinch roller press the protective film.HOCO 2BDHT Intelligent Film Cutter -pressure bar3. With automatic paper feeding: Push the protective fim smooltly to the dotted areato et go. 4. After checking that the protective film is properly placed,select the desired protective film model in the disply screen of the film cutting machine or through Bluetooth in the APP interface, and click “start cutting” to cut. 5. After the cutting finished, the protective film will be automatically pushed out, take out the protective film, and complete the cutting.

    2. The content of the manual will be revised irreguiarly according to product upgrades which may be different fromthe actual product Please refer to the actual product. Please forgive s, for any inconvenience caused!
      Product parameter

Panel 5.5 Colorful HD screen
Internet access 802.11 n Wireless LAN
Power adapter input 100-24W 1.5A 50-60Hz

Power adapter
output| 24V 2A DC
Device input| 24V 2A DC
Power| 4 W

Notice


| Avoid scratching your fingers
---|---
| The working environment where the machine is placed must be dean and tidy to prevent metal liquids from falling into the machine and cause fires, and there must be enough installation space.
| It is forbidden to damage or replace the original power cord. Do not excessively bend, pull, bind, or press the power cord under heavy objects to prevent damage to the power supply and cause electric shock or fire.
| If you do not use the machine for a long time, please disconnect the machine power to prevent fire.
| The table where the machine is placed must be flat and stable to prevent the machine from falling.
| When you want to disconnect the power, please grip under the plug and pull it out. Do not pull the cable. Forcibly pulling the cable may cause electric shock or fire.
| Prohibited to use during thunderstorms to avoid being hit by lightning
| Prohibit unauthorized disassembly

https://www.pgyer.com/eMJD

Scan the OR code, please download the film cutting machine App according to the prompts

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection ‘against hamful interference in a fesidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation Ifthis equipment does cause hamful interference to radio or television reception, which can be defermined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment info an outlet on a circuit different from that to Which the receiver is connected
  • Consut the dealer o an experienced radio/TV technician for help

Caution: Any changes or modifications to this device not explicitly ‘approved by manufacturer could void your authority to operate this ‘equipment This device complies with part 15 of the FCC Rules.
Operation s subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation

RF Exposure Information
“This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals