MEARI SPEED 5S IP Camera User Guide
- June 5, 2024
- MEARI
Table of Contents
Speed 5S
ORIGINALITY DESIGN SMART – AND BEAUTIFUL
QUICK GUIDE
What’s in the box
Consult the checklist below for all components.
Description
| Power | DC 5V ± 10% |
|---|---|
| Status light | Red light solids on the camera network are abnormal |
·Blinking red light: awaiting WiFi connection (faster blinking
Blue light solids on camera running correctly
Blinking blue light: currently connecting (faster blinking)
Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (Max.128G)
Reset| Press and hold for 5 seconds with a pin to reset the camera (if you
have modified settings, they will return to factory defaults)
Install
- Use the included mounting bracket to fix the camera to a clean surface.
- Or, put the camera on a flat surface.
Connect
Download
Smart Life is available for both iOS and Android OS. Research the name ‘Smart
Life’s App Store or Android Market, or scan the upper QR-Code to download the
App.
Set up router
This device only supports a 2.4GHz frequency band router and does not support
a 5GHz frequency band router, please set the relevant parameters of the router
before WiFi configuration, WiFi passwords do not include special characters
such as -!@#$%^&*(). When the device is configured in WiFi, the mobile phone
and device are as close as to the router, which can speed up the configuration
of the device.
Registration process
Step 1 Open the Smart Life App, click “Register, read the “Privacy Policy” and
click “Agree”.
Step 2 input a legal and valid Mobile number or Email address and click ‘Continue”. Input the Verification Code, then log in to the app.
QR Code Configuration
Getting started
- Please follow the instructions and make sure the passwords are input correctly.
- One device can only be added with one App account, if the device has been added with another account already, then it can’t be added to any other account again.
- The device will be unbound from the previous account after being deleted from App. Further, the device will be reset automatically once from blue light to red light.
Process
Step 1 Open the Smart Life App, click “+” or “Add Device”. Then select “All”
on the “Select Device Type” page.
Step 2 Select “Security Camera”. Power the device on and make sure the
indicator is flashing quickly or a prompt tone is heard.
Step 3 Input
WiFi passwords and click “Confirm”, to scan the OR Code with a device. (You
can change the network connection)
Step 4 Click “I heard the beep” when the device comes out “dong dong dong”. And you can complete the configuration in about 30s.
Step 5 The device is added, and the device nickname can also be changed in this interface.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF card
can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
Functions
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with 360
degrees of vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you to push
notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage or Cloud
storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
Functions
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.