OUKITEL Y1000-PRO Smartphone User Guide
- June 5, 2024
- OUKITEL
Table of Contents
OUKITEL Y1000-PRO Smartphone
Overview
Accessories
Battery
Y1000 Pro has included an internal battery. You can track your battery status with the icon shown on the top right of the screen. As microwave ovens, stoves, or radiators, batteries may explode when overheated.
Warning
Use only OUKITEL-approved batteries specifically designed for your phone.
Incompatible batteries can cause serious injuries or damage to your phone.
Never place batteries or phones on or in heating devices, such as microwave
ovens, stoves, or radiators. Batteries may explode when overheated.
Basic parameters
- Display: 6.088 HD+ IPS Touchscreen
- Color: Black Light blue
- Operating system: AndroidTM 10
- Processor: Cortex-A53 up to 1.8 GHz 4/1.5GHz 4
- GPU: IMG GE8320 650MHz
- RAM: 4 GB
- ROM: 64 GB (Expandable UP to 128 G3B)
- Battery: 3600mAh,5V/2A quick charge
Camera
Rear Camera
- 13.0MP main camera
- LED Flash
Front Camera
- 5.0MP
Connection (1/O)
- 2G: 2/3/5/8
- 3G: B1/B2/B4/B5/B8
- 4G: B1/B2/B3/B4/B5/B6/B7/B8/B12/B17/ B19/B20/B28A/B28B
- SIM Card Slot: Dual SIM , Nano+Nano
- FM:87.5 MHz -108 MHz
Other Features
- Video: AVI, MP4, WMV, MKV, MOV, ASF, FLV
- Audio: FLAC, APE, AAC, MKA, MP3, M4A, AMR, ALAC, WAV
- Image: JPEG, BMP, GIF, PNG
Dimensions
- Height: 162.6mm
- Width: 77.9mm
- Thickness:11.2mm
- Weight: 212g
Package contents
- 1USB Cable
- 1*Charger
- 1Warranty card
- 1″Multi-language Manual
- 1Phone Case
Comes with the GoogleTM app and Google Chrome TM
Android is a trademark of Google LLC
- MANUFACTURER NAME: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
- MANUFACTURER ADDRESS: A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK,NO.20
- DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEWN
- DISTRICT, SHENZHEN CHINA
- Manufacturer’s Name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.LTD
- Address:2nd Floor, Building A2, Silicon Valley Power New Material Industril Park,
- No. 20 Dafu Industrial Zone, Aobei Community, Guanlan Longhua New District, Shenzhen,
- Guangdong, China Smart Phone
- Model number: Y1000 Pro
- Operating Temperature: -10° C to 40° C
This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
- Use care with the earphone may be possible excessive sound pressure from earphones and headphones can cause hearing loss.
- CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INcORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
- The product shall only be connected to a USB interface of version USB 2.0
- The adapter shall be installed near the equipment and shall be easily accessible.
- The plug is considered as a disconnect device of the adapter
- The device complies with RF specifications when the device is used at 5mm from your body
FCC STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to the user. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 5.105 Information for the user.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit is different from that to which the receiver is connected.
- Contact the provider or a radio/ TV technician for help.
pecific absorption rate (SAR):
This mobile phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluations of
scientific studies. The standards include a margin of safety designed to
ensure the safety of all people regardless of their age or health. The FCC
Statement of Exposure to RF and the SAR I limit for the United Functioning in
the body This device was tested for typical operations of use in the body. To
comply with RE exposure requirements, a minimum separation distance of 1.0 cm
must be maintained between the user’s body and the telephone, including the
antenna. I hird-party accessories Such as belt clips, covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoIded from use on the body. Use only the supplied antenna or an approved
antenna. FCC ID:2ANMU-Y1000-PRO.