BLADE X1 5G Smart Phone User Guide
- June 5, 2024
- BLADE
Table of Contents
- About This Guide
- Getting to Know Your Phone
- Setting Up Your Phone
- Charging the Battery
- Powering On/Off Your Phone
- Waking Up Your Phone
- General Safety
- Radio Frequency (RF) Energy
- FCC Regulations
- Hearing Aid Compatibility (HAC)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
5G Smart Phone User Guide
About This Guide
Thank you for choosing this ZTE mobile device. In order to keep your device in
its best condition, please read this manual and keep it for future reference.
Copyright
Copyright © 2020 ZTE CORPORATION
All rights reserved.
No part of this publication may be quoted, reproduced, translated, or used in
any form or by any means, electronic or mechanical, including photocopying and
microfilm, without the prior written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make modifications to print errors or
update specifications in this manual without prior notice.
This manual has been designed with the utmost care to ensure the accuracy of
its content. However, all statements, information, and recommendations
contained therein do not constitute a warranty of any kind, either expressed
or implied. We offer self-service for our smart terminal device users. Please
visit ZTE’s official website (at www.zteusa.com) for
more information on self-service and supported product models. Information on
the website takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and damages
caused by unauthorized modifications of the software.
Images and screenshots used in this manual may differ from the actual product.
Content in this manual may differ from the actual product or software.
Trademarks
ZTE, BLADE, and the ZTE logos are trademarks of ZTE
Corporation.
LTE is a trademark of ETSI.
Android™ is a trademark of Google LLC.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under
license.
microSDXC logo is a trademark of SD-3C, LLC.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS:X,
the DTS:X logo, and DTS:X Ultra are registered trademarks or trademarks of
DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights
Reserved.
Other trademarks and trade names are those of their respective owners.
Version No. : R1.0
Edition Time: October 11, 2020
Getting to Know Your Phone
Setting Up Your Phone
The nano-SIM card can be installed or removed while the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other kind of SIM card, or any
non-standard nano-SIM card cut from a SIM card. You can get a standard nano-
SIM card from your service provider.
-
Insert the tip of the tray and eject the tool into the hole on the card tray at the top of the phone.
NOTE:
Please use the tray eject tool included in the box. Otherwise, the card tray may not be ejected.
CAUTION:
Never replace the included tray eject tool with other sharp objects. Ensure that the tray eject tool is perpendicular to the hole. Otherwise, the phone may be damaged. -
Pull out the card tray.
-
Place a nano-SIM card and an optional microSDXC card on the respective slots on the card tray, as shown. Note the notch and shape of the cards and the card slots.
NOTE:
Some applications may require a microSDXC card to work normally and/or may store data on the card. Therefore, it is recommended that you keep a microSDXC card installed and not remove or replace it randomly. -
Carefully slide the tray back into place.
Charging the Battery
Your new phone’s battery should have enough power for the phone to turn on,
find a signal, and make a few calls. You should fully charge the battery as
soon as possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C cables. The use of unapproved
accessories could damage your phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not removable.
Removal may cause fire or explosion.
-
Connect the adapter to the charging jack.
-
Connect the charger to a standard AC power outlet. If the phone is on, you’ll see a charging icon, such as or , appear in the status bar.
-
Disconnect the charger when the battery is fully charged.
NOTE:
Use the charger that comes in-box with your phone to charge the battery. It’s specially built to support QuickCharge 3.0 and USB Power Delivery 2.0.
NOTE:
If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 minutes. Contact customer service if you still cannot power on the phone after prolonged charging.
Powering On/Off Your Phone
- Press and hold the Power key to turn on your phone.
- To turn it off, press and hold the Power key to open the options menu and touch > .
NOTE:
If the screen freezes or takes too long to respond, try pressing and holding
the Power key for over 10 seconds to restart the phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode when it is not in use for some
time. The display is turned off to save power and the keys and the screen are
locked to prevent accidental operation.
You can wake up your phone by turning on the display and unlocking the keys.
- Press the Power key to turn the screen on.
- Swipe up on the screen.
NOTE:
If you have set a fingerprint, a face verification, an unlock pattern, a PIN,
or a password for your phone, you’ll need to touch the fingerprint sensor,
show your face to the front camera, draw the pattern, or enter the
PIN/password to unlock.
For Your Safety
General Safety
| Don’t make or receive phone calls while driving. Never text while driving.
---|---
| Keep your phone at least 15 mm away from your body while making calls.
| Small parts may cause choking.
| Your phone can produce a loud sound.
| To prevent possible hearing damage, do not listen at high volume levels for
long periods. Exercise caution when holding your phone near your ear while the
loudspeaker is in use.
| Avoid contact with anything magnetic.
| Keep away from pacemakers and other electronic medical devices.
| Turn off when asked to in hospitals and medical facilities.
| Turn off when told to on aircraft and at airports.
| Turn off when near explosive materials or liquids.
| Don’t use gas stations.
| Your phone may produce a bright or flashing light.
| Don’t dispose of your phone in the fire.
| Avoid extreme temperatures.
| Avoid contact with liquids. Keep your phone dry.
| Do not attempt to disassemble your phone.
| Only use approved accessories.
| Don’t rely on your phone as a primary device for emergency communications.
Radio Frequency (RF) Energy
This phone is designed and manufactured not to exceed the emission limits for
exposure to radiofrequency (RF) energy set by the Federal Communications
Commission of the United States.
During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands and placed in positions that
simulate RF exposure in usage against the head with no separation, and near
the body with a separation of 0.6 inches (15 mm). Although the SAR is
determined at the highest certified power level, the actual SAR level of the
device while operating can be well below the maximum value. This is because
the phone is designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
The exposure standard for wireless devices employing a unit of measurement is
known as the Specific Absorption Rate or SAR. The SAR limit set by the FCC is
1.6 W/kg.
This device complies with SAR for general
population/uncontrolled exposure limits in ANSI/IEEE
C95.1-1992 and had been tested in accordance with the measurement methods and
procedures specified in IEEE1528.
The FCC has granted an Equipment Authorization for this model phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on file with the FCC and
can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on
FCC ID: SRQ-Z6750M.
For this device, the highest reported SAR value for usage against the head is
1.421 W/kg, and for usage near the body is 1.496 W/kg.
While there may be differences between the SAR levels of various phones and at
various positions, they all meet the government requirements.
SAR compliance for body-worn operation is based on a separation distance of
0.6 inches (15 mm) between the unit and the human body. Carry this device at
least 0.6 inches (15 mm) away from your body to ensure the RF exposure level
is compliant or lower than the reported level. To support body-worn
operations, choose the belt clips or holsters, which do not contain metallic
components, to maintain a separation of 0.6 inches (15 mm) between this device
and your body.
RF exposure compliance with any body-worn accessory that contains metal was
not tested and certified, and the use of such body-worn accessories should be
avoided.
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Hearing Aid Compatibility (HAC)
Regulations for Mobile Phones
In 2003, the FCC adopted rules to make digital wireless telephones compatible
with hearing aids and cochlear implants. Although analog wireless phones do
not usually cause interference with hearing aids or cochlear implants, digital
wireless phones sometimes do because of electromagnetic energy emitted by the
phone’s antenna, backlight, or other components. Your phone is compliant with
FCC HAC regulations (ANSI C63.19- 2011).
While some wireless phones are used near some hearing devices (hearing aids
and cochlear implants), users may detect a buzzing, humming, or whining noise.
Some hearing devices are more immune than others to this interference noise
and phones also vary in the amount of interference they generate. The wireless
telephone industry has developed a rating system for wireless phones to assist
hearing device users in finding phones that may be compatible with their
hearing devices. Not all phones have been rated. Phones that are rated have
the rating on their box or a label located on the box. These ratings are not
guaranteed. Results will vary, depending on the level of immunity of your
hearing device and the degree of your hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to use a rated
phone successfully. Trying out the phone with your hearing device is the best
way to evaluate it for your personal needs.
This phone has been tested and rated for use with hearing aids for some of the
wireless technologies that it uses. However, there may be some newer wireless
technologies used in this phone that have not been tested yet for use with
hearing aids. It is important to try the different features of this phone
thoroughly and in different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise. Consult your service
provider or the manufacturer of this phone for information on hearing aid
compatibility. If you have questions about return or exchange policies,
consult your service provider or phone retailer.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to
generate less interference to hearing devices than phones that are not
labeled. M4 is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to
be more usable with a hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/ higher of the two ratings.
(Note that not all hearing devices contain telecoils.)
Your phone has been tested for hearing aid device compatibility and has an
M4/T4 rating.
Hearing devices may also be measured for immunity to this type of
interference. Your hearing device manufacturer or hearing health professional
may help you find results for your hearing device.
For additional information about the FCC’s actions with regard to hearing aid
compatible wireless devices and other steps the FCC has taken to ensure that
individuals with disabilities have access to telecommunications services,
please go to www.fcc.gov/cgb/dro.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>