VENTURE LIGHTING AM0007 LED Garage Light Fixture User Manual
- June 9, 2024
- VENTURE LIGHTING
Table of Contents
VENTURE LIGHTING AM0007 LED Garage Light Fixture
Before You Begin
Read These Instructions Completely and Carefully
Installation for Surface Mount Applications
STEP 1: Disconnect power from the luminaire and follow proper
lockout/tagout procedures before beginning installation or maintenance.
STEP 2: Remove the existing luminaire. Dispose of the lamp(s) and
ballast(s) per local requirements
STEP 3: Use supply wire min. 70°C when connecting wire leads inside the
junction box or min. 105°C when connecting leads inside the fixture
STEP 4: Remove the screws which secure the fixture together (4) and open
the fixture (1).
STEP 5: Secure the fixture to the junction box with the appropriate
screws.
STEP 6: Secure the fixture input leads to the supply lead wires.
STEP 7: Replace the screws to secure the fixture together.
STEP 8: Use silicone sealant to seal the gaps.
STEP 9: Power can now be restored to the fixture.
Installation for Pendant Mount Applications
STEP 1: Disconnect power from the luminaire and follow proper
lockout/tagout procedures before beginning installation or maintenance.
STEP 2: Remove the existing luminaire. Dispose of the lamp(s) and
ballast(s) per local requirements.
STEP 3: Use supply min. 105°C when connecting wire leads inside the
fixture.
STEP 4: Remove the screws which secure the fixture together (4) and open
the fixture (1 )
STEP 5: Secure the appropriate conduit into the fixture (3/4″ NPS for the
84W fixture and 1/2″ NPS for the 44W fixture).
STEP 6: Route the power supply wiring through the conduit and connect the
fixture input leads.
STEP 7: Replace the screws to secure the fixture together.
STEP 8: Power can now be restored to the fixture.
WARNING
Risk of fire and electric shock
- Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or maintenance. Contact a qualified electrician for installation.
- Venture Lighting’s LED garage fixture installation requires knowledge of luminaire electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this product.
CAUTION
- Suitable for use in wet locations.
- To ensure weather-proof protection, be sure to seal housing openings with silicone sealant.
Customer Support
800-451-2606
6675 Parkland Blvd., Suite 100
Solon, Ohio 44139 USA
E-mail:[email protected]
VentureLighting.com
Documents / Resources
|
VENTURE LIGHTING AM0007 LED Garage Light
Fixture
[pdf] User Manual
AM0007 LED Garage Light Fixture, AM0007, LED Garage Light Fixture, Garage
Light Fixture, Light Fixture, Fixture
---|---