STAIRVELLE xBrick Full-Colour 16 LED Floodlight User Manual
- September 12, 2024
- STAIRVELLE
Table of Contents
xBrick Full-Colour 16 LED Floodlight
Product Information: LED Floodlight
Specifications:
-
Date: 17.06.2024
-
ID: 259187 (V6)
-
Intended Use: Electronic lighting effect using LED
technology -
Designed for: Professional use only
-
Not suitable for: Household use
Product Usage Instructions:
Safety Instructions:
Intended Use: This LED Floodlight is designed
for professional use as an electronic lighting effect using LED
technology. It should only be used as described in the user manual
to prevent personal injury or property damage.
Operating Life: To extend the operating life of
the device, take regular breaks and avoid frequent switching on and
off. Note that the device is not suitable for continuous
operation.
Danger to Life Due to Electric Current: High
voltages may be present within the device. Never remove any covers
as there are no user-serviceable parts inside. Do not use the
device if covers, safety equipment, or optical components are
missing or damaged.
Risk of Eye Damage: The device generates highly
intense light radiation. Avoid looking directly into the light
source to prevent eye damage.
Risk of Epileptic Fit: The device emits
flashing lights that can trigger epileptic fits in certain
individuals. If you are at risk of epilepsy, avoid prolonged
exposure to flashing lights and looking directly at strobing
light.
FAQ:
Q: Can this LED Floodlight be used in households?
A: No, this LED Floodlight is designed for professional use only
and is not suitable for household use.
Q: What should I do if I suspect isolation damage to the mains
cable?
A: In case of isolation damage, disconnect the power supply
immediately and arrange for repair. If in doubt, seek advice from a
qualified electrician.
User Manual
xBrick Full-Colour 16×3W
LED Floodlight
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0)
9546 9223-0 Internet: www.thomann.de
17.06.2024, ID: 259187 (V6)
Table of contents
Table of contents
1 General information………………………………………………………………………………………………………………… 5 1.1 Symbols
and signal words………………………………………………………………………………………………… 5
2 Safety instructions……………………………………………………………………………………………………………………. 8 3
Features……………………………………………………………………………………………………………………………………. 12 4
Installation……………………………………………………………………………………………………………………………….. 13 5 Starting
up……………………………………………………………………………………………………………………………….. 16 6 Components and
functions…………………………………………………………………………………………………. 18 7
Operating…………………………………………………………………………………………………………………………………. 20
7.1 Starting the device…………………………………………………………………………………………………………… 20 7.2 Main
menu………………………………………………………………………………………………………………………… 20 7.3 Menu
overview………………………………………………………………………………………………………………… 25 7.4 Functions in
5-channel DMX mode………………………………………………………………………………. 26 7.5 Functions in
13-channel DMX mode……………………………………………………………………………. 26 8 Technical
specifications……………………………………………………………………………………………………….. 28 9 Plug and
connection assignments…………………………………………………………………………………….. 30 10
Troubleshooting…………………………………………………………………………………………………………………….. 31 11
Cleaning……………………………………………………………………………………………………………………………………. 33 12 Protecting
the environment……………………………………………………………………………………………….. 34
3 xBrick Full-Colour 16×3W
LED Floodlight
4 xBrick Full-Colour 16×3W LED Floodlight
General information
1 General information
This document contains important instructions for the safe operation of the
product. Read and follow the safety instructions and all other instructions.
Keep the document for future refer- ence. Make sure that it is available to
all those using the product. If you sell the product to another user, be sure
that they also receive this document. Our products and documentation are
subject to a process of continuous development. They are therefore subject to
change. Please refer to the latest version of the documentation, which is
ready for download under www.thomann.de.
1.1 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal
words that are used in this document.
5 xBrick Full-Colour 16×3W
LED Floodlight
General information
Signal word DANGER! WARNING! NOTICE!
Warning signs
Meaning This combination of symbol and signal word indicates an immediate
dangerous situation that will result in death or serious injury if it is not
avoided. This combination of symbol and signal word indicates a pos- sible
dangerous situation that can result in death or serious injury if it is not
avoided. This combination of symbol and signal word indicates a pos- sible
dangerous situation that can result in material and environmental damage if it
is not avoided.
Type of danger Warning high-voltage.
Warning dangerous optical radiation.
Warning suspended load.
6 xBrick Full-Colour 16×3W LED Floodlight
Warning signs
Type of danger Warning danger zone.
General information
7 xBrick Full-Colour 16×3W
LED Floodlight
Safety instructions
2 Safety instructions
Intended use
This device is intended for use as an electronic lighting effect by means of
LED technology. The device is designed for professional use only and is not
suitable for use in households. Use the device only as described in this user
manual. Any other use or use under other operating con- ditions is considered
to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial,
and intellectual abilities and having corresponding knowledge and experience.
Other persons may use this device only if they are supervised or instructed by
a person who is responsible for their safety.
Extend the operating life of the device by regular breaks and by avoiding frequent switching on and off. The device is not suitable for continuous operation.
8 xBrick Full-Colour 16×3W LED Floodlight
Safety instructions
Safety
DANGER! Risk of injury and choking hazard for children! Children can suffocate
on packaging material and small parts. Children can injure themselves when
handling the device. Never allow children to play with the packaging material
and the device. Always store packaging material out of the reach of babies and
small children. Always dispose of packaging material properly when it is not
in use. Never allow children to use the device without supervi- sion. Keep
small parts away from children and make sure that the device does not shed any
small parts (such knobs) that children could play with.
DANGER! Danger to life due to electric current! Within the device there are
areas where high voltages may be present. Never remove any covers. There are
no user-serviceable parts inside. Do not use the device when covers, safety
equipment or optical components are missing or damaged.
DANGER! Danger to life due to electric current! A short circuit could lead to
a fire hazard and risk of death. Always use proper ready-made insulated
triple-core mains cable with a safety plug. Do not modify the mains cable or
the plug. In case of isolation damage, disconnect immediately the power supply
and arrange repair. If in doubt, seek advice from a qualified electrician.
WARNING! Risk of eye damage caused by high light intensity! The device
generates highly intense light radiation. Looking directly into the light
source can damage the eyes. Never look directly into the light source.
WARNING! Risk of epileptic fit due to flashing lights! The device emits
flashing lights (strobe effects). Flashing lights can trigger epileptic fits
in specific people. If you are at risk of epi- lepsy, avoid spending longer
periods of time subjected to flashing lights and looking into strobing light.
9 xBrick Full-Colour 16×3W
LED Floodlight
Safety instructions
NOTICE! Risk of fire due to covered vents and neighbouring heat sources! If
the vents of the device are covered or the device is operated in the immediate
vicinity of other heat sources, the device can over- heat and burst into
flames. Never cover the device or the vents. Do not install the device in the
immediate vicinity of other heat sources. Never operate the device in the
immediate vicinity of naked flames. NOTICE! Damage to the device if operated
in unsuitable ambient conditions! The device can be damaged if it is operated
in unsuitable ambient conditions. Only operate the device indoors within the
ambient conditions specified in the “Technical specifications” chapter of this
user manual. Avoid operating it in environments with direct sun- light, heavy
dirt and strong vibrations. Avoid operating it in environments with strong
temperature fluctuations. If temperature fluc- tuations cannot be avoided (for
example after transport in low outside temperatures), do not switch on the
device immediately. Never subject the device to liquids or moisture. Never
move the device to another location while it is in operation. In environments
with increased dirt levels (for example due to dust, smoke, nicotine or mist):
Have the device cleaned by qualified specialists at reg- ular intervals to
prevent damage due to overheating and other malfunctions. NOTICE! Damage to
the device due to high voltages! The device can be damaged if it is operated
with the incorrect voltage or if high voltage peaks occur. In the worst case,
excess vol- tages can also cause a risk of injury and fires. Make sure that
the voltage specification on the device matches the local power grid before
plugging in the device. Only operate the device from professionally installed
mains sockets that are protected by a residual current circuit breaker (FI).
As a precaution, disconnect the device from the power grid when storms are
approaching or it the device will not be used for a longer period.
10 xBrick Full-Colour 16×3W LED Floodlight
Safety instructions
NOTICE! Risk of fire by exceeding the maximum current! The device can supply
power to other devices of identical design and connected in series. If too
many devices are connected, the maximum permitted power consumption can be
exceeded, which can cause the device to overheat and burst into flames. Only
con- nect devices of identical design to the device. When deciding how many
devices you can connect in series, make sure that the max- imum output current
specified on the device and in the “Technical specifications” chapter of the
user manual is not exceeded. Only use power cords with a cable cross-section
designed for the required current intensity when connecting the devices in
series. NOTICE! Risk of fire due to installation of a wrong fuse! Using fuses
of a different type than compatible with the device may cause a fire and
seriously damage the device. Only use fuses of the same type. Observe the
labelling on the device casing and the information in the “Technical data”
chapter.
11 xBrick Full-Colour 16×3W
LED Floodlight
Features
3 Features
n Light source: 16 four-colour LEDs, 3 W n Control via DMX (5 or 13 channels)
as well as buttons and display on the unit n Automatic mode n Master / Slave
mode n Sound control
For technological reasons, the light output of LEDs decreases over their
lifetime. This effect increases with higher operating temperature. You can
extend the service life of the illuminants by providing adequate ventilation
and operating the LEDs with the lowest possible brightness.
12 xBrick Full-Colour 16×3W LED Floodlight
4 Installation
Installation
Unpack and check carefully there is no transportation damage before using the
unit. Keep the equipment packaging. To fully protect the product against
vibration, dust and moisture during transportation or storage use the original
packaging or your own packaging material suitable for transport or storage,
respectively.
WARNING! Risk of injury from falling devices that were inadequately secured!
If devices are not properly secured during assembly, they can cause severe
injury and considerable damage by falling.
When installing and operating, make sure to follow the standards and
regulations that apply in your country.
Always secure the device with a secondary safety attachment, such as a safety
cable or a safety chain.
13 xBrick Full-Colour 16×3W
LED Floodlight
Installation
NOTICE! Risk of overheating and fire due to inadequate distance and bad
ventilation! If the distance between the light source and the illuminated
surface is too short or the device is badly ventilated, the device can
overheat and cause fires. Make sure that illuminated surfaces are more than 2
m away. Do not operate the device in ambient temperatures above 40 °C. Always
ensure sufficient ventilation at the operating location.
NOTICE! Potential property damage due to unsuitable stands! If the device is
mounted on an unsuitable stand, there is a risk that the stand will fall over
and cause damage. Only use stands whose maximum bearing capacity is at least
as high as the weight of the device. Always ensure that the stand is stable.
14 xBrick Full-Colour 16×3W LED Floodlight
Mounting options
Installation
NOTICE! Data transfer errors due to improper wiring! If the DMX connections
are wired incorrectly, this can cause errors during the data transfer. Do not
connect the DMX input and output to audio devices, e.g. mixers or ampli-
fiers. Use special DMX cables for the wiring instead of normal microphone
cables.
You can install the device in hanging or standing positions. When in use, the
device must always be attached to a solid surface or an approved mount. Use
the openings provided on the two-piece bracket for attaching. Always work from
a stable platform whenever installing, moving or servicing the device. While
you do this, the area underneath the device must be cor- doned off. The safety
cable must be threaded through the safety cable eyelet ( Ä Chapter 6
`Components and functions’ on page 18).
Please note that this device must not be connected to a dimmer.
15 xBrick Full-Colour 16×3W
LED Floodlight
Starting up
5 Starting up
Connections in DMX mode
Create all connections while the device is off. Use the shortest possible
high-quality cables for all connections. Take care when running the cables to
prevent tripping hazards.
Connect the DMX input of the device to the DMX output of a DMX controller or
another DMX device. Connect the output of the first DMX device to the input of
the second one, and so on to form a daisy chain. Always ensure that the output
of the last DMX device in the daisy chain is terminated with a resistor (110 ,
¼ W).
16 xBrick Full-Colour 16×3W LED Floodlight
Starting up
Connections in master/slave mode
When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on.
17 xBrick Full-Colour 16×3W
LED Floodlight
Components and functions
6 Components and functions
Back
ö
$
%& ‘
(ö
. -,+* )
18 xBrick Full-Colour 16×3W LED Floodlight
1 Locking screws for the brackets 2 Safety cable eyelet 3 Display 4 [DMX In] | DMX input 5 [DMX Out] | DMX output 6 [Power Out] | Rubber panel socket 7 [Power In] | Rubber panel plug with fuse holder for the power supply 8 [MIC] | Microphone for sound control 9 [ENTER] | Selects an option of the respective operating mode. 10 [Up] | Increases the displayed value by one. 11 [Down] | Decreases the displayed value by one. 12 [Menu] | Activates the main menu, saves changes. 13 Two-piece bracket for suspension or set-up
Components and functions
19 xBrick Full-Colour 16×3W
LED Floodlight
Operating
7 Operating
7.1 Starting the device
Connect the device to the mains power supply, to start operation. After few
seconds the dis- play shows, that the unit executes a reset. After that the
unit is ready for operation. If it is con- figured to operate as Master”, an
automatic light show begins. According to your previous selection, the display
show Master Sound’ ,Master Fade’ or `Master Color’ .
7.2 Main menu
Press [MENU] shortly to activate the main menu and select an operating mode.
Use the [Up] and [Down] buttons to change the respectively displayed value.
When the display shows the desired value, press [ENTER].
To save your settings/changes, press [MENU] for at least two seconds.
If you don’t press any button for about 1 minute, the unit returns to the
previously selected mode. The set values are retained even when the device is
disconnected from the mains power supply.
20 xBrick Full-Colour 16×3W LED Floodlight
DMX address Operating mode ,,DMX”
Operating
Press [MENU] repeatedly until the display shows `DMX Address’ . Press [ENTER].
Now you can set the number of the first DMX channel to be used by the device
(DMX address). Use the [Up] and [Down] buttons to select a value between 1 and
512.
When the display shows the desired value press [ENTER] to return to the main
menu.
Make sure that this number matches the configuration of your DMX controller.
The following table shows the highest possible DMX address for the various DMX
modes.
Mode 5-channel 13-channel
Highest possible DMX address 508 500
Press [MENU] repeatedly until the display shows Channel Mode’ . Press [ENTER]. Now use the [Up] and [Down] buttons to select one of the following DMX operating modes: 5-channel (5 Ch Mode’ ) or 13-channel ( `13 Ch Mode’ ).
This setting is only relevant when the device is controlled via DMX.
When the display shows the desired value, press [ENTER] to return to the main
menu or [MENU] for at least two seconds to switch immediately in operation
mode ,,DMX”.
21 xBrick Full-Colour 16×3W
LED Floodlight
Operating
Operating mode ,,Master/Slave”
Press [MENU] repeatedly until the display shows Slave Mode’ . Press [ENTER]. Use the [Up] and [Down] buttons to selectMaster Mode’ , Slave1 Mode’ or Slave 2 Mode’ .
When the display shows the desired value, press [ENTER] to confirm the
selection and return to the main menu.
In the operating mode ,,Master/Slave”, the master and the connected devices
configured as ,,Slave 1″ operate synchronously. The devices configured as
,,Slave 2″ operate mirror-inverted to the master.
Operating mode ,,Show”
The auto show can only be activated on the device that is configured as
master.
Press [MENU] repeatedly until the display shows Show Mode’ . Press [ENTER]. Use the [Up] and [Down] buttons to select between nSound’ (automatic sound-controlled show), n Fade’ (automatic show with adjustable fade effect) and nColor’ (automatic show with fast colour change)
Press in the variation ,,Fade” [ENTER] again. Use the [Up] and [Down] buttons
to select now the speed between 1 (fast) and 9 (slow).
When the display shows the desired value press [MENU] for at least two
seconds. The device shows an automatic show, the display shows Master Sound’ ,Master Fade’ or `Master Color’ according to your selection.
22 xBrick Full-Colour 16×3W LED Floodlight
Operating
LCD background illumination
Press [MENU] repeatedly until the display shows Black LCD’ . Press [ENTER]. Use the [Up] and [Down] buttons to select betweenLCDLight On’ and `LCDLight
Off’ .
When the display shows the desired value press [ENTER] to return to the main
menu.
White balance
For each of the four LED groups you can set separately the composition of the
colour white of the primary colours red, green and blue.
Press [MENU] repeatedly until the display shows White Balance’ . Press [ENTER]. Use the [Up] and [Down] buttons to select betweenRed-1 Balance’ ,
Green-1 Balance’ ,Blue-1 Balance’ , `Red-2 Balance’ etc.
When the display shows the desired primary colour and LED group, press
[ENTER]. Now use the [Up] and [Down] buttons to select a value between 0 and
255.
When the display shows the desired value, press [ENTER].
Press [MENU] to return to the main menu.
23 xBrick Full-Colour 16×3W
LED Floodlight
Operating
Self test
Operating hours display
Press [MENU] repeatedly until the display shows Auto Test’ . Press [ENTER]. The device now per- forms a self test and shows successively the primary colours red, green and blue and then white light. Press [ENTER] to end the self test and return to the main menu. Press [MENU] repeatedly until the display showsFixture Time’ . Press
[ENTER]. The number of operating hours will now appear on the display. Press
[MENU] to return to the main menu.
24 xBrick Full-Colour 16×3W LED Floodlight
7.3 Menu overview
Operating
25 xBrick Full-Colour 16×3W
LED Floodlight
Operating
7.4 Functions in 5-channel DMX mode
Channel 1 2 3 4 5
Value 0…255 0…255 0…255 0…255 0…255
Function Intensity red (0 % to 100 %) Intensity green (0 % to 100 %) Intensity blue (0 % to 100 %) Main control (master dimmer, 0 % to 100 %) Strobe effect (increasing speed)
7.5 Functions in 13-channel DMX mode
In this mode the 16 LEDs are divided into four groups of 4 LEDs each. Each of
the channels 1 to 12 controls one basic colour of a group.
Channel 1 2
Value 0…255 0…255
LEDs 1 to 4
Function Intensity red (0 % to 100 %) Intensity green (0 % to 100 %)
26 xBrick Full-Colour 16×3W LED Floodlight
Channel 3 4 5 6 7 8 9 10 11 12 13
Value 0…255 0…255 0…255 0…255 0…255 0…255 0…255 0…255 0…255 0…255 0…255
LEDs 5 to 8 9 to 12 13 to 16
Function Intensity blue (0 % to 100 %) Intensity red (0 % to 100 %) Intensity green (0 % to 100 %) Intensity blue (0 % to 100 %) Intensity red (0 % to 100 %) Intensity green (0 % to 100 %) Intensity blue (0 % to 100 %) Intensity red (0 % to 100 %) Intensity green (0 % to 100 %) Intensity blue (0 % to 100 %) Main control (master dimmer, 0 % to 100 %)
Operating
27 xBrick Full-Colour 16×3W
LED Floodlight
Technical specifications
8 Technical specifications
365 mm
70 mm
215 mm
Light source
16 × 3in1 RGB LED, 3 W each
Optical properties
Beam angle
30°
Control
DMX
Number of DMX channels
5, 13
Input connections
Power supply
1 × rubber panel plug C14
DMX control
1 × XLR panel plug, 3-pin
Output connections
Power supply for further 1 × rubber panel socket C13
devices
Output current, max.: 6 A
DMX control
1 × XLR panel socket, 3-pin
Power consumption
60 W
Supply voltage
100 – 240 V 50/60 Hz
Fuse
5 mm × 20 mm, 1 A, 250 V, slow
blow
International Protection Rating
IP20
Mounting options
Hanging, standing
28 xBrick Full-Colour 16×3W LED Floodlight
Further information
Technical specifications
Dimensions (W × H × D), with bracket facing back- wards
Weight
Ambient conditions
Temperature range
Relative humidity
365 mm × 70 mm × 215 mm
3 kg 0 °C…40 °C 20%…80% (non-condensing)
Suitable for outdoor use Colour mix LED type Fanless Remote control Wireless DMX Housing colour
No RGB x-in-1 Yes Not possible No Black
29 xBrick Full-Colour 16×3W
LED Floodlight
Plug and connection assignments
9 Plug and connection assignments
Introduction
This chapter will help you select the right cables and plugs to connect your
valuable equip- ment so that a perfect light experience is guaranteed.
Please take our tips, because especially in Sound & Light’ caution is indicated: Even if a plug fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a short circuit orjust’ a not
working light show!
DMX connections
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug.
Pin Configuration
1
Ground, shielding
2
Signal inverted (DMX, `cold signal’)
3
Signal (DMX+, `hot signal’)
30 xBrick Full-Colour 16×3W LED Floodlight
Troubleshooting
10 Troubleshooting
NOTICE! Data transfer errors due to improper wiring! If the DMX connections
are wired incorrectly, this can cause errors during the data transfer.
Do not connect the DMX input and output to audio devices, e.g. mixers or
ampli- fiers.
Use special DMX cables for the wiring instead of normal microphone cables.
In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting:
The device is not working, no light, the fan is not running
Check the mains connection and the main fuse.
31 xBrick Full-Colour 16×3W
LED Floodlight
Troubleshooting
No response to the DMX con- troller
1. Check the DMX connections and cables for proper connection
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to high-voltage cables
that may cause damage or interference to a DMX interface circuit.
If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de.
32 xBrick Full-Colour 16×3W LED Floodlight
11 Cleaning
Optical lenses
Fan grids
Cleaning
Clean the optical lenses, that are accessible from the outside, regularly in
order to optimize the light output. The frequency of cleaning depends on the
operating environment: wet, smoky or particularly dirty surroundings can cause
more accumulation of dirt on the optics of the device. n Clean with a soft
cloth using our lamp and lens cleaner (item no. 280122). n Always dry the
parts carefully.
The fan grids of the device must be cleaned of any contamination, such as
dust, etc. on a reg- ular basis. Before cleaning, switch off the device and
disconnect mains-operated devices from the mains. Only use pH-neutral,
solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly
damp lint-free cloth.
33 xBrick Full-Colour 16×3W
LED Floodlight
Protecting the environment
12 Protecting the environment
Disposal of the packing material
Environmentally friendly materials have been chosen for the packaging. These
materials can be sent for normal recycling. Ensure that plastic bags,
packaging, etc. are disposed of in the proper manner.
Do not dispose of these materials with your normal household waste, but make
sure that they are collected for recycling. Please follow the instructions and
markings on the packaging.
Observe the disposal note regarding documentation in France.
34 xBrick Full-Colour 16×3W LED Floodlight
Protecting the environment
Disposal of your old device
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) as amended.
Do not dispose of your old device with your normal household waste; instead,
deliver it for controlled disposal by an approved waste disposal firm or
through your local waste facility. If in doubt, consult your local waste
management facility. You can also return the device to a retailer if they
offer to take the device back for free or if they are legally obliged to do
so. When disposing of the device, comply with the rules and regulations that
apply in your country. You can also return your old device to Thomann GmbH at
no charge. Check the current conditions on www.thomann.de.
Proper disposal protects the environment as well as the health of your fellow
human beings. This is because the proper handling of old devices negates the
potential negative effects of hazardous substances, and because it conserves
resources by recycling them.
Also note that waste avoidance is a valuable contribution to environmental
protection. Repairing a device or passing it on to another user is an
ecologically valuable alternative to disposal.
If your old device contains personal data, delete those data before disposing
of it.
35 xBrick Full-Colour 16×3W
LED Floodlight
Notes
36 xBrick Full-Colour 16×3W LED Floodlight
Notes
37 xBrick Full-Colour 16×3W
LED Floodlight
Notes
38 xBrick Full-Colour 16×3W LED Floodlight
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>